Metra 99-3303

Manyèl Enstalasyon Sipò Radyo Veyikil Metra 99-3303

Modèl: 99-3303

1. Entwodiksyon

This manual provides detailed instructions for the proper installation and maintenance of your Metra 99-3303 Vehicle Radio Mount. This product is designed to facilitate the installation of an aftermarket single DIN or double DIN car stereo into specific vehicles, providing a factory-like finish and secure mounting. Please read all instructions carefully before beginning the installation process.

2. Enfòmasyon sou Sekirite

  • Always disconnect the vehicle's negative battery terminal before starting any electrical installation to prevent short circuits and damage.
  • Asire w tout koneksyon fil yo byen fèm epi byen izole pou evite danje elektrik.
  • Refer to your vehicle's service manual for specific dashboard disassembly and reassembly procedures.
  • If you are unsure about any part of the installation, consult a qualified professional installer.
  • Mete ekipman sekirite apwopriye, tankou gan ak pwoteksyon pou je, pandan enstalasyon an.

3. Pake kontni

Verify that all components are present before beginning installation. The Metra 99-3303 kit typically includes:

  • Main Dash Bezel / Trim Panel
  • Radio Mounting Brackets (left and right)
  • Wiring Harness Adapter (vehicle-specific)
  • Antenna Adapter (if required for vehicle)
  • Hardware Pack (screws, clips, etc.)
Metra 99-3303 Vehicle Radio Mount Kit components

Figi 1: This image displays the various components typically included in the Metra 99-3303 vehicle radio mount kit. It shows the main dash bezel, side mounting brackets, and a wiring harness adapter, designed to integrate an aftermarket radio into a vehicle's dashboard.

4. Zouti obligatwa

Anjeneral, zouti sa yo nesesè pou enstalasyon:

  • Zouti Retire Panel
  • Phillips tèt tournevis
  • Flat Tounvis
  • Pince pou dezabiye fil/sertize fil
  • Tep elektrik oswa Tib Retresi Chalè
  • Small Socket Set (optional, depending on vehicle)

5. Enstalasyon ak Enstalasyon

Follow these general steps for installing the Metra 99-3303 radio mount. Specific vehicle disassembly steps may vary.

  1. Preparasyon machin: Dekonekte tèminal negatif batri machin ou an.
  2. Dashboard Disassembly: Carefully remove the factory dash trim panels and any necessary components to access the factory radio. Use a panel removal tool to avoid scratching surfaces.
  3. Factory Radio Removal: Unbolt and remove the factory radio from the dashboard. Disconnect all wiring harnesses and the antenna cable from the back of the radio.
  4. Mount Assembly (to Aftermarket Radio): Attach the Metra mounting brackets to your new aftermarket radio using the screws provided with the radio or the Metra kit. Ensure the radio is centered and flush with the front of the brackets.
  5. Koneksyon fil elektrik: Connect the Metra wiring harness adapter to your aftermarket radio's wiring harness. Match wire colors (e.g., yellow to yellow for constant power, red to red for accessory power, black to black for ground). Solder or crimp connections for reliability and insulate them properly. Connect the antenna adapter if needed.
  6. Install Radio and Mount: Slide the assembled aftermarket radio and Metra mount into the vehicle's dash opening. Secure the mount using the factory mounting points or hardware provided.
  7. Koneksyon tès: Before reassembling the dash, reconnect the vehicle's negative battery terminal. Turn on the vehicle and test the aftermarket radio's functionality (power, audio, balance, fader, radio reception, etc.).
  8. Dashboard Reassembly: Once all functions are verified, disconnect the battery again. Reinstall all removed dash panels and components in reverse order of removal. Reconnect the battery.

6. Opere

The Metra 99-3303 is a passive mounting solution. Its primary function is to securely house your aftermarket car stereo within the vehicle's dashboard, providing a stable and aesthetically integrated platform. Once installed, the operation of your car audio system will be governed by the features and controls of your aftermarket radio itself. The mount ensures that the radio is held firmly in place and that the dash retains a factory-like appearance.

7. Antretyen

The Metra 99-3303 radio mount requires minimal maintenance:

  • Periodically inspect the mounting screws and connections to ensure they remain tight and secure.
  • Clean the visible surfaces of the dash kit with a soft, damp twal. Evite pwodwi chimik piman bouk ki ka domaje fini an.
  • If any part of the mount becomes loose or damaged, address it promptly to prevent rattling or potential damage to the radio.

NAN. Depanaj

Most issues related to an aftermarket radio installation are typically electrical or related to the radio unit itself. However, if you encounter problems that might be related to the mount:

  • Lach/Briyan: Ensure all mounting screws are tightened. Verify that the radio is properly seated within the mounting brackets and that the dash bezel is securely clipped into place.
  • Gaps Around Radio: Double-check that the radio is pushed fully into the mount and that the dash bezel is correctly aligned and snapped into the dashboard.
  • Radio Not Powering On: While often a wiring issue, ensure the radio is fully seated and making proper contact with the wiring harness. Re-check all electrical connections.

For electrical or radio-specific issues, refer to your aftermarket radio's instruction manual or consult a professional.

9. Espesifikasyon

  • Mak: Metra
  • Nimewo Modèl: 99-3303
  • Nimewo Pati Manifakti: BTL5002-KV0586
  • Pwa atik: 1.5 liv (apeprè)
  • Dimansyon pake: 14.06 x 12.03 x 12.02 pous (apeprè)
  • ASIN: B007W7Z8II
  • Konpatibilite: Designed for specific vehicle applications (refer to product packaging or Metra website for exact vehicle fitment).

10. Garanti ak sipò

Warranty information for Metra products is typically provided by the manufacturer and may vary. Please refer to the documentation included with your specific product or visit the official Metra website for the most current warranty details and support options. For technical assistance or inquiries regarding your Metra 99-3303 Vehicle Radio Mount, it is recommended to contact Metra customer support directly.

Metra Elektwonik: www.metraonline.com

Dokiman ki gen rapò - 99-3303

Preview Gid Aplikasyon EZ Order Metra a
Yon gid konplè pou aplikasyon EZ Order Metra yo, ki detaye konpatibilite machin ak nimewo pyès pwodwi pou enstalasyon odyo machin. Gen ladan enfòmasyon sou aplikasyon Metra Fit Guide pou iPhone ak Android.
Preview Metra 99-8220 Installation Guide for Toyota Tundra & Sequoia (2007-2011)
Step-by-step installation instructions for the Metra 99-8220 dash kit, enabling aftermarket radio installation in 2007-2011 Toyota Tundra and 2008-2011 Toyota Sequoia vehicles. Includes kit features, components, and wiring.
Preview Twous Enstalasyon Metra 99-6519 pou Dodge Charger/Magnum 2005-2007
Enstriksyon detaye pou enstalasyon twous tablodbò Metra 99-6519 la, ki pèmèt enstalasyon radyo single-DIN, ISO-DIN, oubyen DDIN nan machin Dodge Charger ak Magnum (2005-2007) san navigasyon faktori. Gen ladan karakteristik twous la, konpozan yo, zouti ki nesesè yo, ak gid asanblaj etap pa etap.
Preview Enstriksyon Enstalasyon Metra 99-7804 pou Honda Accord 2013-2017
Gid enstalasyon detaye pou twous tablodbò Metra 99-7804 la, ki pèmèt enstalasyon yon radyo aftermarket nan yon Honda Accord 2013-2017. Gen ladan karakteristik twous la, konpozan yo, demontaj, preparasyon, asanblaj, fil elektrik, ak enstriksyon ekran taktil.
Preview Enstriksyon Enstalasyon Metra 99-8164 pou Lexus RX300 (1999-2003)
Gid enstalasyon Metra 99-8164 pou Lexus RX300 1999-2003, ki detaye pwosesis enstalasyon sistèm odyo machin apre lavant tout pandan y ap kenbe kontwòl klima yo epi bay enfòmasyon sou fil elektrik.
Preview Enstriksyon Enstalasyon Metra 99-8271 pou Toyota 4-Runner (2010-up)
Enstriksyon enstalasyon konplè pou twous tablodbò Metra 99-8271 la, ki fèt pou machin Toyota 4-Runner apati 2010. Gen ladan karakteristik twous la, konpozan yo, demontaj, preparasyon, ak etap asanblaj pou radyo single ak double DIN.