1. Entwodiksyon
The Marley Qmark HBB2004 is a liquid-filled electric hydronic baseboard heater designed to provide consistent and efficient warmth. Its sealed heating element retains heat, ensuring stable room temperatures even after the thermostat cycles off. This low-profile unit is suitable for various indoor spaces, offering a quiet and fanless heating solution through natural convection.
Yon imaj ki montre devan an view of the Qmark HBB2004 liquid-filled electric hydronic baseboard heater. The unit is beige with a low-profile design, featuring a top grille for heat emission and a solid front panel.
2. Enfòmasyon enpòtan sou sekirite
Please read and understand all instructions before installing, operating, or performing maintenance on this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- Risk chòk elektrik: Do not open the heater casing. All servicing should be performed by qualified personnel.
- Danje dife: Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front of the heater.
- Danje boule: Chofaj sa a cho lè li itilize. Pou evite boule, pa kite po toutouni manyen sifas cho.
- Atè: Ensure the heater is properly grounded according to all local and national electrical codes.
- Kote: Do not use this heater in bathrooms, laundry areas, or similar indoor locations where it may come into contact with water. Do not use outdoors.
- Pwoteksyon Surchof: The heater is equipped with a thermal cutoff function to prevent overheating. If the heater shuts off, investigate and clear any obstructions.
- UL ki nan lis: This heater is UL Listed for safe operation on flooring, tile, or carpet.
3. Enstalasyon ak Enstalasyon
The HBB2004 heater is designed for permanent installation and requires a dedicated 240 Volt electrical circuit. Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.
Montaj
- The unit is designed for floor mounting against a wall. Ensure the mounting surface is stable and level.
- Maintain adequate clearance around the heater for proper air circulation. Do not block the air intake or outlet grilles.
Fil elektrik
- The heater allows for electrical wiring connections at either end of the unit for installation flexibility.
- Refer to the detailed wiring diagram provided in the complete installation guide that accompanies the product.
- Asire w ke tout koneksyon an sekirite epi byen izole.
4. Operasyon Enstriksyon
The Qmark HBB2004 operates using natural convection, which means it circulates heat throughout the room without the use of a fan, resulting in quiet operation.
- Kontwòl Thermostat: This heater requires an external thermostat (sold separately) for temperature regulation. Connect a compatible thermostat according to its instructions and local electrical codes.
- Mete Tanperati: Once installed and wired, set your external thermostat to the desired room temperature. The heater will activate to warm the space.
- Chalè konstan: Due to its liquid-filled element, the heater will continue to radiate warmth even after the thermostat reaches the set temperature and cycles off, providing stable and comfortable heat.
5. Antretyen
Regular maintenance ensures optimal performance and longevity of your heater. Always disconnect power to the heater at the circuit breaker before performing any maintenance.
- Netwayaj Eksteryè: Clean the exterior surfaces of the heater with a soft, damp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
- Netwayaj griyaj: Periodically inspect the air intake and outlet grilles for dust and debris accumulation. Use a vacuum cleaner with a brush attachment to gently remove any blockages.
- Eleman Entèn: The heater contains no user-serviceable internal parts. Do not attempt to open the sealed heating element or perform internal repairs.
NAN. Depanaj
If you experience issues with your Qmark HBB2004 heater, refer to the following troubleshooting guide:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Chofaj pa limen | No power supply; Circuit breaker tripped; Thermostat set too low; Loose wiring connection | Check power at the source; Reset circuit breaker; Adjust thermostat to a higher setting; Consult an electrician to inspect wiring |
| Ensifizan pwodiksyon chalè | Thermostat set too low; Airflow obstructed; Heater wattage insufficient for room size | Increase thermostat setting; Clear any obstructions from grilles; Ensure heater is appropriately sized for the room |
| Heater cycles off unexpectedly | Overheating due to obstructed airflow; Thermal cutoff activated | Clear any obstructions around the heater; Allow unit to cool down; If problem persists, consult an electrician |
If troubleshooting steps do not resolve the issue, contact a qualified electrician or Marley customer support for assistance.
7. Espesifikasyon
- Mak: Marley
- Modèl: HBB2004
- Wattage: 2000 wat
- Voltage: 240 Volts
- Dimansyon (Apeprè): 58 pous (longè) x 2.938 pous (lajè) x 8.75 pous (wotè)
- Pwa atik: 30 liv
- Kalite gaz: Elektrik
- Kalite montaj: Mount Floor
- Karakteristik espesyal: Fast Heating, Overheat Protection
- Koulè: Navajo White
- Itilizasyon anndan/deyò: Andedan kay la sèlman
8. Garanti ak sipò
For specific warranty information regarding your Marley Qmark HBB2004 heater, please refer to the warranty card included with your product or visit the official Marley website. Retain your proof of purchase for any warranty claims.
For technical support, replacement parts, or further assistance, please contact Marley customer service directly. Contact information can typically be found on the manufacturer's websit oswa nan anbalaj pwodwi a.
