1. Entwodiksyon
This manual provides essential instructions for the safe and efficient use of your Icom BC-160 Rapid Charger. Please read this manual thoroughly before using the charger to ensure proper operation and to prevent damage to the unit or connected devices.
Karakteristik kle:
- Rapid charging capability for compatible Icom batteries.
- Genuine Icom accessory, ensuring compatibility and performance.
- Designed for use with various Icom two-way radios.
2. Enfòmasyon sou Sekirite
Always observe the following safety precautions to avoid electric shock, fire, or personal injury:
- Use only the specified Icom AC adapter with this charger. Using an unauthorized adapter may cause damage or fire.
- Do not disassemble or modify the charger. Unauthorized modifications can lead to electric shock or fire.
- Keep the charger away from water and moisture. Do not operate with wet hands.
- Do not use the charger if the cable or plug is damaged.
- Asire bon vantilasyon alantou plato a pandan operasyon an.
- Do not charge batteries other than those specified by Icom for this charger.
- Debranche chargeur a nan priz kouran an lè w pa ap itilize l oswa anvan w netwaye l.
3. Pake kontni
Verifye ke tout atik yo prezan nan pakè ou a:
- Icom BC-160 Rapid Charger Base
- AC Adapter (Power Supply)
Image: The Icom BC-160 Rapid Charger includes the charging base and its accompanying AC power adapter, both in black.
4. Enstalasyon
- Konekte adaptè AC a: Insert the DC plug from the AC adapter into the DC input jack located on the back of the BC-160 charger base.
- Ploge nan priz kouran: Plug the AC adapter into a standard wall power outlet.
- Plasman: Place the charger on a stable, flat surface, ensuring adequate ventilation.
5. Operasyon Enstriksyon
To charge a compatible Icom battery pack:
- Insert Battery/Radio: Carefully slide the battery pack (or the radio with the battery pack attached) into the charging slot of the BC-160 charger base. Ensure the contacts on the battery align with the contacts in the charger.
- Endikatè chaje: The charging indicator LED on the charger base will illuminate, typically red, to indicate that charging is in progress.
- Fini chaje: Once the battery is fully charged, the indicator LED will change color (e.g., green) or turn off, depending on the specific battery and charger model. Refer to your radio's battery manual for exact indicator behavior.
- Remove Battery/Radio: Once charging is complete, remove the battery pack or radio from the charger.
Nòt: Charging times may vary depending on the battery capacity and its current charge level.
6. Antretyen
- Netwayaj: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners or solvents.
- Depo: Store the charger in a cool, dry place when not in use. Avoid extreme temperatures and direct sunlight.
- Pwen kontak: Periodically check the charging contacts on both the charger and the battery for dirt or corrosion. Clean gently with a dry cotton swab if necessary.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè endikatè chajè a pa limen. |
|
|
| Battery does not charge fully or takes too long. |
|
|
8. Espesifikasyon
| Nimewo Modèl | BC160 |
| Mak | ICOM |
| Antre Voltage | 240 Volts (AC Adapter dependent) |
| Pwa atik | 12 ounces (approximately 0.75 lbs) |
| Dimansyon pake | 5.2 x 4.6 x 4.1 pous |
| Koulè | Nwa |
| Manifakti | ICOM |
Nòt: Espesifikasyon yo ka chanje san avètisman pou amelyore pwodwi a.
9. Garanti ak sipò
Specific warranty details for the Icom BC-160 Rapid Charger are not provided within this manual. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Icom websit.
Anjeneral, ou ka jwenn enfòmasyon sipò sou sit entènèt manifakti a. websit:
