Entwodiksyon
This manual provides essential information for the safe and effective use of your OSRAM 64258 HLX 20W 12V G4 Halogen Light Bulb. Please read these instructions carefully before installation and operation. Retain this manual for future reference.
Enfòmasyon sou Sekirite
Toujou obsève prekosyon sekirite sa yo:
- Risk pou boule: Halogen bulbs operate at high temperatures. Do not touch the bulb directly during operation or immediately after turning off. Allow sufficient time for cooling.
- Danje elektrik: Ensure power is disconnected before installing, removing, or handling the bulb.
- Kòrèk Voltage: Use only with 12V power supplies. Using incorrect voltage can damage the bulb and fixture.
- Manyen ak Swen: Avoid touching the glass envelope of the bulb with bare hands. Oils from skin can create hot spots, reducing bulb life. Use a clean cloth or gloves during installation.
- Bon enstalasyon: Install only in fixtures designed for G4 bi-pin halogen bulbs with appropriate wattage evalyasyon.
- Dispozisyon: Jete anpoul itilize yo dapre règleman lokal yo.
Enstalasyon ak Enstalasyon
- Dekoneksyon pouvwa: Before beginning, ensure the power supply to the fixture is completely turned off at the circuit breaker or wall switch.
- Old Bulb Removal (if applicable): If replacing an existing bulb, allow it to cool completely. Gently pull the old bulb straight out from its socket.
- New Bulb Handling: Hold the new OSRAM 64258 HLX bulb by its ceramic base or with a clean, lint-free cloth or gloves. Avoid touching the glass envelope directly.
- Ensèsyon: Align the two pins of the G4 base with the holes in the fixture's socket. Gently push the bulb straight into the socket until it is fully seated. Do not force it.
- Koneksyon pouvwa: Yon fwa anpoul la byen enstale, retabli kouran an nan aparèy la.
Enstriksyon Operasyon
The OSRAM 64258 HLX is a dimmable halogen bulb designed for 12V systems.
- Limen/Etenyen: Operate the bulb using the standard switch connected to your 12V lighting fixture.
- Dimming: If your fixture is connected to a compatible 12V dimmer switch, this bulb can be dimmed to adjust light output. Ensure the dimmer is rated for halogen loads.
- Tan chofe: Halogen bulbs provide instant full brightness upon activation.
Antretyen
Minimal maintenance is required for this halogen bulb.
- Netwayaj: If the bulb's glass envelope becomes dirty, ensure the power is off and the bulb is cool. Gently wipe with a clean, dry, lint-free cloth. Do not use liquid cleaners.
- Ranplasman: Replace the bulb when it reaches the end of its operational life. Follow the "Setup and Installation" steps for safe replacement.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Anpoul pa limen. |
|
|
| Anpoul flickers. |
|
|
| Anpoul boule byen vit. |
|
|
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | OSRAM |
| Nimewo Modèl | 64258 HLX (Item model number: A18661B0013) |
| Kalite limyè | Alojene |
| Wattage | 20 Watts |
| Voltage | 12 Volts |
| Baz anpoul | G4 Bi-Pin |
| Gwosè fòm anpoul | T3 |
| Klète | 350 Lumen |
| Koulè limyè | Blan cho |
| Karakteristik espesyal | Dimmable |
| Materyèl | Copper (base/pins), Glass (envelope) |
| Dimansyon pwodwi | 3.54 x 0.39 x 0.39 pous (apeprè) |
| Pwa atik | 0.04 ons (apeprè) |
| UPC | 046135542626 |
Garanti ak sipò
For warranty information or technical support, please refer to the official OSRAM websit la oubyen kontakte revandè w la. Kenbe resi acha w la pou reklamasyon garanti.
Official OSRAM Websit: www.osram.com
