Technoline KT 300 Digital 3-Alarm Kitchen Timer User Manual

1. Entwodiksyon

Thank you for choosing the Technoline KT 300 Digital 3-Alarm Kitchen Timer. This versatile device is designed to assist you with precise timing in various applications, including cooking, laboratory work, sports, and industrial tasks. It features three independent countdown timers, a clock function, and multiple mounting options for convenience. Please read this manual thoroughly to ensure proper setup and operation of your timer.

2. Pwodwi souview

Imaj: Devan view of the Technoline KT 300 timer, displaying three independent countdown timers and control buttons.

Karakteristik kle:

• Three independent countdown timers with individual alarms.
• Countdown range: 1 second to 19 hours, 59 minutes, 59 seconds.
• Integrated quartz clock with 12/24 hour display option.
• Memory function for frequently used timer settings.
• Versatile mounting options: wall mount, table stand, or magnetic attachment.
• Large, clear digital display.

Fonksyon bouton:

• T1, T2, T3 (Left Side): Selects the respective timer for setting or viewing.
• ST/SP MEMORY (Right Side): Starts/Stops the selected timer; long press activates memory function.
• CLEAR (Right Side): Resets the selected timer to zero.
• CLOCK TIMER (Right Side): Toggles between clock display and timer display mode.
• HR (Bottom): Adjusts hours for clock or timer setting.
• MIN (Bottom): Adjusts minutes for clock or timer setting; also toggles 12/24 hour format in clock setting mode.
• SEC (Bottom): Adjusts seconds for clock or timer setting.

3. Enstalasyon

3.1 Enstalasyon batri

1. Jwenn konpatiman pil la sou dèyè revèy la.
2. Louvri kouvèti lòj batri a.
3. Mete de (2) pil AAA, asire w polarite ki kòrèk la (+/-) jan yo endike anndan konpatiman an.
4. Fèmen kouvèti lòj batri a byen.

The timer will power on automatically once batteries are installed.

3.2 Opsyon Plasman

• Table Standing: Extend the integrated stand on the back of the timer to place it on a flat surface.
• Magnetic Holding: The timer features magnets on its back for attachment to metallic surfaces, such as a refrigerator door.
• Montaj mi: Use the hanging hole on the back of the timer to mount it on a wall hook or screw.

4. Operasyon Enstriksyon

4.1 Mete revèy la

1. Peze a TIMER LÒT button to switch to clock display mode.
2. Peze epi kenbe la TIMER LÒT button for approximately 3 seconds until the hour digits begin to flash.
3. Sèvi ak la HR, MIN, ak SEC bouton pou mete tan aktyèl la.
4. While setting minutes, press the MIN bouton an pou chanje ant fòma ekspozisyon 12 èdtan ak 24 èdtan.
5. Peze TIMER LÒT again to confirm the setting and exit clock setting mode.

4.2 Setting and Using Timers (T1, T2, T3)

1. Peze a TIMER LÒT button to ensure you are in timer display mode.
2. Select the desired timer (T1, T2, or T3) by pressing the corresponding button on the left side of the timer. The selected timer's display will be active for setting.
3. Sèvi ak la HR, MIN, ak SEC buttons to set the desired countdown time. Each press increments the value; hold to fast-advance.
4. Pou kòmanse konte a rebours la, peze bouton an ST/SP MEMORY bouton. Revèy la ap kòmanse konte a rebours.
5. Pou pran yon poz nan konte a rebours la, peze bouton an ST/SP MEMORY bouton an ankò. Peze l yon lòt fwa ankò pou rekòmanse.
6. To clear a timer setting, press the KLE button while the timer is stopped or counting down. This will reset the selected timer to 00:00:00.
7. When a timer reaches zero, an alarm will sound. Press any button to stop the alarm.

4.3 Fonksyon memwa

The timer can store a frequently used countdown setting for quick recall.

1. Set a desired time for any timer (T1, T2, or T3) as described in section 4.2.
2. While the timer is stopped and displaying the desired time, press and hold the ST/SP MEMORY button for approximately 3 seconds. The display will indicate that the setting has been saved to memory.
3. To recall the saved memory setting, select the desired timer (T1, T2, or T3), then briefly press the ST/SP MEMORY button while the timer is at 00:00:00 or cleared. The saved time will appear.

5. Antretyen

5.1 Netwayaj

To clean your timer, wipe it with a soft, slightly damp twal. Pa sèvi ak pwodui netwayaj abrazif, solvan, oswa plonje aparèy la nan dlo.

5.2 Ranplasman batri

When the display becomes dim or the timer functions erratically, it is time to replace the batteries. Follow the battery installation steps in section 3.1. Always replace both AAA batteries simultaneously with new ones.

NAN. Depanaj

• Timer not turning on or display is blank: Check if batteries are inserted correctly with the right polarity. Replace with fresh AAA batteries.
• Timer not counting down/up: Ensure the timer is not paused. Press ST/SP MEMORY to start. Verify a time has been set.
• Alarm is too quiet: Ensure the timer is placed in an area where the alarm can be heard. The alarm volume is fixed.
• Lè ki pa kòrèk la parèt: Re-set the clock following the instructions in section 4.1.

If problems persist, please refer to the warranty and support information.

7. Espesifikasyon

8. Garanti ak sipò

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the documentation included with your purchase or contact your retailer. For technical support or further assistance, please reach out to the Technoline customer service department or the point of purchase.

For more information, you may visit the official Technoline websit la oubyen kontakte distribitè lokal ou a.