Pwodwi souview
The Feit Electric PL13/41 is a 13-watt compact fluorescent (CFL) PL lamp designed for various indoor lighting applications. This energy-efficient bulb provides cool white light, making it suitable for a range of fixtures.
Image: A single Feit Electric PL13/41 13-Watt Fluorescent PL Bulb, featuring a compact U-shaped fluorescent tube with a 2-pin base.
Karakteristik kle yo enkli:
- Energy efficient design.
- Compact PL shape for specific fixtures.
- Cool White light (4100 Kelvin).
- 800 lumens brightness.
- Designed for 120 Volts AC power.
Enstalasyon ak Enstalasyon
This section provides instructions for safely installing your Feit Electric PL13/41 bulb. Always ensure power is off before handling electrical components.
- Sekirite Premye: Before attempting installation, ensure the power supply to the fixture is turned OFF at the circuit breaker or wall switch.
- Identify Fixture Type: Confirm your fixture is designed for a PL-type compact fluorescent bulb with a 2-pin base.
- Retire ansyen anpoul la (si sa aplikab): If replacing an existing bulb, gently twist and pull the old bulb straight out from its socket. Allow it to cool if it was recently in use.
- Mete yon nouvo anpoul: Align the two pins on the base of the Feit Electric PL13/41 bulb with the corresponding slots in the fixture's socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
- Retabli pouvwa: Once the bulb is securely installed, restore power to the fixture from the circuit breaker or wall switch.
- Tès: Limen switch limyè a pou asire w anpoul la ap fonksyone byen.
Nòt Sekirite Enpòtan:
- Do not install this bulb in dimmable fixtures unless explicitly stated on the product packaging or fixture.
- Avoid touching the glass portion of the bulb with bare hands during installation, as oils can reduce bulb life. Use a clean cloth or gloves.
- Dispose of old fluorescent bulbs according to local regulations, as they contain small amounts of mercury.
Enstriksyon Operasyon
The Feit Electric PL13/41 bulb operates simply once installed. It is designed for standard on/off functionality.
- Limen/Etenyen: Use the wall switch or fixture control to turn the light on or off.
- Tan chofe: Like most fluorescent bulbs, this bulb may require a brief warm-up period (a few seconds) to reach full brightness, especially in colder environments.
Antretyen
Minimal maintenance is required for the Feit Electric PL13/41 bulb to ensure optimal performance and longevity.
- Netwayaj: Ensure the power is off and the bulb is cool before cleaning. Gently wipe the bulb with a soft, dry, lint-free cloth to remove dust. Do not use liquid cleaners.
- Ranplasman: Replace the bulb when it reaches the end of its lifespan (indicated by flickering, dimming, or failure to light). Follow the installation steps for replacement.
- Dispozisyon: Fluorescent bulbs contain small amounts of mercury and should be recycled or disposed of according to local hazardous waste guidelines. Do not dispose of in regular household trash.
Depanaj
If your Feit Electric PL13/41 bulb is not functioning as expected, refer to the following common issues and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Anpoul pa limen. | No power to the fixture, bulb not seated correctly, bulb has reached end of life, faulty fixture. | Check power switch/breaker. Ensure bulb is fully inserted. Replace bulb. Inspect fixture wiring (consult electrician if unsure). |
| Anpoul flickers. | Loose connection, incompatible dimmer, bulb nearing end of life, cold environment. | Ensure bulb is secure. Do not use with incompatible dimmers. Replace bulb. Allow bulb to warm up in cold conditions. |
| Limyè fèb. | Bulb nearing end of life, dust accumulation, incorrect bulb type for fixture. | Replace bulb. Clean bulb and fixture. Ensure correct wattage and lumen output for your needs. |
If troubleshooting steps do not resolve the issue, contact Feit Electric customer support or a qualified electrician.
Espesifikasyon
Detailed technical specifications for the Feit Electric PL13/41 13-Watt Fluorescent PL Bulb:
| Atribi | Valè |
|---|---|
| Mak | Feit elektrik |
| Nimewo Modèl | PL13/41 |
| Kalite limyè | CFL (Limyè Fliyoresan Konpak) |
| Wattage | 13 wat |
| Enkandesan ekivalan Wattage | 13 Watts |
| Klète | 800 Lumen |
| Tanperati Koulè | 4100 Kelvin (blan fre) |
| Voltage | 120 Volts |
| Gwosè fòm anpoul | T (PL Shape) |
| Mwayèn lavi | 10000 èdtan |
| Materyèl | Copper (base components) |
| Itilizasyon Andedan kay la / Deyò | Itilize andedan kay la sèlman |
| Pwa atik | 0.01 ons |
| Dimansyon pwodwi | 1.3" lajè x 0.7" wotè (apeprè) |
| Peyi orijin | Lachin |
| UPC | 017801014310 |
Garanti ak sipò
Warranty information for the Feit Electric PL13/41 bulb is not explicitly provided within this manual. Please refer to the product packaging or the official Feit Electric website for the most current warranty details.
For technical support or further inquiries, please visit the official Feit Electric website or contact their customer service department. Contact information can typically be found on the product packaging or their websit.
You can visit the Feit Electric Store on Amazon for more information: Feit Electric Store