Manyèl Enstriksyon Kegco K199SS-1 Single Tap Kegerator an asye pur

1. Entwodiksyon

This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your Kegco K199SS-1 Single Tap Stainless Steel Kegerator. This unit is designed to dispense draft beverages from a keg and can also function as a standard refrigerator. Please read all instructions carefully before use to ensure proper functionality and to prevent injury or damage.

The Kegco K199SS-1 features a complete direct draw keg tap kit, compatible with most D System domestic beer kegs. It includes a 15-inch chrome-plated metal draft tower with one faucet, a Sankey keg coupler, an aluminum 5 lb. CO2 cylinder, and a single gauge regulator. Additional features include a removable drip tray, a textured serving countertop with a metal safety rail, and a steel interior floor mat.

2. Enstriksyon Sekirite

AVÈTISMAN: Pou diminye risk dife, chòk elektrik, oswa blesi, swiv prekosyon debaz sa yo:

• Li tout enstriksyon yo anvan ou sèvi ak aparèy la.
• Pa sere oswa itilize gazolin oswa lòt vapè ak likid ki ka pran dife nan vwazinaj sa a oswa nenpòt lòt aparèy.
• Kenbe ouvèti vantilasyon yo, nan patiraj aparèy la oswa nan estrikti bati-an, san yo pa obstak.
• Pa domaje kous febrifuj la.
• Aparèy sa a pa fèt pou itilize pa moun (ki gen ladan timoun) ki gen kapasite fizik, sansoryèl oswa mantal redwi, oswa ki pa gen eksperyans ak konesans, sof si yo te ba yo sipèvizyon oswa enstriksyon konsènan itilizasyon aparèy la pa yon moun ki responsab sekirite yo.
• Timoun yo ta dwe sipèvize pou asire ke yo pa jwe ak aparèy la.
• CO2 Cylinder Safety: Handle CO2 cylinders with care. Store in a well-ventilated area. Do not expose to heat or direct sunlight. Ensure regulator is properly attached and connections are secure to prevent leaks.

3. Pake kontni

Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or broken, contact customer support.

• Kegerator Cabinet
• Single Tap Draft Tower with Faucet
• Sankey Keg Coupler (D System)
• 5 lb. Aluminum CO2 Cylinder (empty)
• Single Gauge CO2 Regulator
• Beer Line and Air Line Hoses
• Chrome Guard Rail
• Plato degoute detachable
• Etajè Fil (2)
• Kegerator Conversion Kit Guide
• Kle

Figi 3.1: Plis paseview of the complete kit components, including the draft tower, CO2 regulator, CO2 tank, keg coupler, hoses, and wrench.

4. Gid Enstalasyon

4.1. Plasman ak nivelman

Place the kegerator on a flat, stable surface away from direct sunlight or heat sources. Ensure there is adequate ventilation around the unit. The dimensions are approximately 25.5"D x 20"W x 33"H. Use the adjustable leveling feet or casters to ensure the unit is level.

Figi 4.1: Kegerator dimensions and interior capacity, showing space for a full-size keg.

4.2. Installing the Draft Tower

1. Locate the pre-drilled hole on the top of the kegerator cabinet.
2. Feed the beer line and air line from the draft tower through this hole.
3. Align the tower base with the mounting holes and secure it using the provided screws.
4. Attach the chrome guard rail around the top edge of the unit, if desired.

Figi 4.2: The single faucet draft tower and chrome guard rail assembly.

4.3. Connecting the CO2 Regulator and Tank

1. Ensure the 5 lb. CO2 cylinder is empty before filling. Have it filled by a certified gas supplier.
2. Attach the CO2 regulator to the CO2 cylinder. Ensure the washer is in place to prevent leaks. Tighten securely with a wrench.
3. Connect the air line hose from the draft tower to the output barb on the CO2 regulator. Secure with a clamp.

4.4. Attaching the Keg Coupler

1. Connect the beer line from the draft tower to the top of the Sankey keg coupler. Secure with a clamp.
2. Connect the air line from the CO2 regulator to the side barb on the keg coupler. Secure with a clamp.

5. Operating Your Kegerator

5.1. Loading a Keg

The Kegco K199SS-1 can hold one full-size, straight pony, or quarter slim keg, or up to two sixth slim, strap handle, or rubber home brew kegs. It will not fit Bevel or Rubber Kegs (commonly used by Coors and Miller Brewing Companies) which are wider in the middle.

1. Open the kegerator door.
2. Carefully place the keg inside the cabinet. Ensure it is centered to allow the door to close properly.
3. Attach the keg coupler to the keg by aligning it with the keg valve and twisting clockwise until it locks into place. Push down the handle to engage the coupler.
4. Open the valve on the CO2 cylinder.
5. Adjust the CO2 regulator to the recommended pressure for your beverage (typically 10-12 PSI for most beers).
6. Close the kegerator door.

Figi 5.1: Illustration of keg compatibility and interior capacity for different keg sizes.

5.2. Dispensing Beverages

After the keg is loaded and CO2 pressure is set, allow the kegerator to cool the beverage to the desired temperature (typically 38°F for most beers). This may take several hours.

1. Place a glass under the faucet.
2. Pull the faucet handle forward to dispense.
3. Push the faucet handle back to stop dispensing.

5.3. Converting to an All-Refrigerator

The Kegco K199SS-1 can be converted into a standard refrigerator by removing the keg and CO2 tank. Two removable wire shelves are included for this purpose.

1. Disconnect the keg coupler from the keg and remove the keg and CO2 tank from the unit.
2. Place the wire shelves inside the cabinet as desired.
3. The unit will now function as a compact beverage refrigerator.

Figi 5.2: The kegerator can be easily converted into a two-shelf refrigerator for bottled or canned beverages.

6. Antretyen ak netwayaj

6.1. Cleaning the Beer Lines

Regular cleaning of beer lines is crucial for maintaining beverage quality and preventing bacterial growth. Clean lines every 2-4 weeks, or between keg changes.

1. Disconnect the keg coupler from the keg.
2. Use a beer line cleaning kit (sold separately) with a suitable cleaning solution.
3. Follow the cleaning kit instructions to flush the beer line, faucet, and coupler with cleaning solution, then rinse thoroughly with water.

6.2. Cleaning the Drip Tray

The removable drip tray should be emptied and cleaned regularly to prevent spills and maintain hygiene.

1. Slide out the drip tray from under the faucet.
2. Empty any collected liquid.
3. Wash the drip tray with warm, soapy water. Rinse and dry thoroughly before replacing.

Figi 6.1: The removable drip tray and grate for easy cleaning.

6.3. General Interior and Exterior Cleaning

Wipe down the interior and exterior surfaces of the kegerator with a mild detergent and a soft cloth. Avoid abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning the interior.

NAN. Depanaj

8. Espesifikasyon

9. Pwodwi souview Videyo

Gade videyo sa a pou yon vizyon anplisview of Kegco Kegerators and their features.

10. Sipò pou Kliyan

For further assistance, questions regarding setup, operation, or troubleshooting, please refer to the official Kegco websit la oubyen kontakte depatman sèvis kliyan yo. Ou kapab vizite tou Kegco Store on Amazon pou plis enfòmasyon.