1. Entwodiksyon
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your CAT Pumps A1573011 Electric Pressure Washer Pump. This direct drive pump is designed for various pressure washing applications, delivering 2000 PSI at 1.5 GPM. Please read this manual thoroughly before installation or operation.
2. Enfòmasyon sou Sekirite
WARNING: Failure to follow these instructions could result in serious injury or property damage.
- Always wear appropriate personal protective equipment, including eye protection, when operating or servicing the pump.
- Ensure the pump is securely mounted before operation.
- Dekonekte kouran an anvan ou fè nenpòt antretyen oswa sèvis.
- Do not operate the pump with damaged electrical cords or connections.
- Never direct the high-pressure spray at people, animals, or electrical equipment.
- Ensure adequate ventilation when operating the pump.
- Kenbe timoun ak bèt kay lwen zòn operasyon an.
3. Pwodwi souview
The CAT Pumps A1573011 is a direct drive electric pressure washer pump, pre-plumbed and pre-tested for convenience. It features a durable construction designed for reliable performance.

Image 3.1: CAT Pumps A1573011 Electric Pressure Washer Pump. This image displays the main pump unit, featuring a blue pump body with a red cap and brass fittings for water inlet and outlet connections.
4. Enstalasyon
4.1 Monte ponp lan
- Ensure the mounting surface is stable and capable of supporting the pump's weight.
- Align the pump with the 4-bolt engine face plate.
- Secure the pump using the existing bolts from your old pump. Bolts are not included with this unit.
- Verify that the pump is firmly attached and there is no wobble.
4.2 Koneksyon dlo
- Connect the water supply hose to the pump's inlet. Ensure a tight, leak-free connection.
- Connect the high-pressure hose from the pump's outlet to your pressure washer gun/wand.
- Ensure all connections are secure to prevent leaks during operation.
4.3 Koneksyon elektrik
This is a corded electric pump. Connect the pump's power cord to a suitable grounded electrical outlet. Ensure the power supply matches the pump's voltage kondisyon.
5. Operasyon Enstriksyon
5.1 Verifikasyon Pre-Operasyon
- Tcheke tout koneksyon tiyo yo pou wè si yo byen sere.
- Ensure the water supply is turned on and flowing freely to the pump.
- Enspekte fil elektrik la pou nenpòt domaj.
5.2 Kòmanse ponp lan
- With the water supply on, squeeze the trigger on the pressure washer gun to purge air from the system until a steady stream of water emerges.
- Plug in the pump's power cord.
- Release the trigger to allow the pump to build pressure.
- Begin your pressure washing task.
5.3 Fèmen
- Fèmen pouvwa ponp lan.
- Fèmen rezèv dlo a.
- Squeeze the trigger on the pressure washer gun to release any remaining pressure in the system.
- Disconnect hoses and store the pump in a dry, protected area.
6. Antretyen
6.1 Tèks regilye
- Inspect hoses and connections for wear or leaks before each use.
- Check the pump for any visible damage or loose parts.
- Clean the pump exterior to prevent dirt buildup.
6.2 Preparasyon pou ivè (pou klima frèt)
If storing the pump in an area where temperatures may drop below freezing, it is crucial to winterize the pump to prevent damage:
- Drain all water from the pump and hoses.
- Introduce an RV antifreeze solution into the pump's inlet and run the pump briefly until the solution exits the outlet.
- Sere ponp lan nan yon anviwònman ki pa gen jèl.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen presyon oswa presyon ki ba |
|
|
| Ponp pa kòmanse |
|
|
| Dlo koule |
|
|
8. Espesifikasyon
- Nimewo Modèl: A1573011
- Mak: CAT Pumps
- Presyon maksimòm: 2000 psi
- To maksimòm koule: 1.5 galon pa minit (GPM)
- Sous pouvwa: Fil elektrik
- Dyamèt arbr: 5/8 pous
- Montaj: Direct Drive, 4-bolt engine face plate
- Material (Fittings): Copper (Brass)
9. Garanti ak sipò
For warranty information and technical support, please refer to the documentation provided with your original purchase or contact CAT Pumps directly through their official website or customer service channels. Keep your purchase receipt as proof of purchase for warranty claims.