Avaya EM200 Branch Expansion Unit User Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Avaya EM200 Branch Expansion Unit, Model 700476401. The EM200 is designed to extend the capabilities of your existing Avaya communication system, offering additional connectivity and resource expansion for branch office environments or growing network needs. Please read this manual thoroughly before attempting to install or operate the unit to ensure proper function and safety.

2. Enfòmasyon sou Sekirite

Obsève prekosyon sekirite sa yo pou evite blesi ak domaj nan ekipman an:

• Sekirite elektrik: Only use the power adapter supplied with the unit. Ensure the power outlet is properly grounded. Do not expose the unit to water or excessive humidity.
• Plasman: Install the unit in a well-ventilated area, away from direct sunlight, heat sources, and excessive dust. Ensure stable placement to prevent accidental falls.
• Sèvis: Do not attempt to open or service the unit yourself. Refer all servicing to qualified service personnel.
• Câbles: Route all cables carefully to avoid tripping hazards and damage.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a. Si gen nenpòt atik ki manke oswa ki domaje, kontakte vandè ou imedyatman.

• Avaya EM200 Branch Expansion Unit (Model 700476401)
• Adaptè pouvwa
• Ethernet kab
• Materyèl pou monte (si sa aplikab)
• Gid Quick Start

4. Enstalasyon

4.1 Enstalasyon Fizik

1. Chwazi yon kote: Select a dry, well-ventilated area for the EM200 unit. Ensure it is within reach of a power outlet and your network infrastructure.

2. Montaj (si ou vle): If rack-mounting or wall-mounting, use the provided hardware and follow the specific instructions included with the mounting kit. Ensure the unit is securely fastened.

3. Konekte kab rezo yo: Connect one end of the Ethernet cable to the LAN port on the EM200 unit and the other end to your network switch or router. Ensure a secure connection.

4. Konekte pouvwa: Plug the power adapter into the DC IN port on the EM200 unit, then plug the other end into a grounded electrical outlet. The unit will power on automatically.

Figure 1: Avaya EM200 Branch Expansion Unit. This image displays the overall design of the unit, including its front panel which typically features indicator lights and possibly some ports.

4.2 Inisyal Konfigirasyon

Upon powering on, the EM200 unit will initiate its startup sequence. Observe the indicator lights for status. Refer to your Avaya communication system's administration guide for specific instructions on how to discover and integrate the EM200 expansion unit into your existing network infrastructure. This typically involves accessing the main system's web interface or management software to register the new branch unit and configure its network parameters.

5. Operasyon Enstriksyon

5.1 Power On/Off

The EM200 unit powers on automatically when connected to a power source. To power off, disconnect the power adapter from the electrical outlet. It is recommended to gracefully shut down the main Avaya system before disconnecting the EM200 unit if it is actively integrated.

5.2 Endikatè Limyè

The front panel of the EM200 unit features several indicator lights that provide status information:

• Pouvwa dirije: Solid green indicates the unit is powered on.
• Ki ap dirije Status: Varies depending on the operational state. Consult your main system's documentation for specific status light patterns (e.g., solid green for operational, blinking for activity, red for error).
• Network/Link LEDs: Typically located near the Ethernet ports, these indicate network activity and link status. Solid green usually means a valid link, blinking indicates data transmission.

5.3 Entegrasyon sistèm

Once physically connected and powered on, the EM200 unit functions as an extension of your primary Avaya communication system. All operational control and management are typically performed through the central Avaya system's administrative interface. This includes managing connected devices, configuring services, and monitoring performance.

6. Antretyen

6.1 Netwayaj

To clean the exterior of the EM200 unit, use a soft, dry cloth. Do not use liquid cleaners, aerosols, or solvents, as these can damage the casing or internal components. Ensure the unit is powered off and disconnected from the power source before cleaning.

6.2 Mizajou Firmware

Firmware updates for the EM200 unit are typically managed through the central Avaya communication system. Consult your system's documentation or Avaya support for information on checking for and applying firmware updates to ensure optimal performance and security.

6.3 Konsiderasyon Anviwònman

Maintain the operating environment within the recommended temperature and humidity ranges specified by Avaya for network equipment. Proper ventilation is crucial to prevent overheating.

NAN. Depanaj

If you encounter issues with your EM200 Branch Expansion Unit, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, consult your Avaya system administrator or Avaya technical support for further assistance.

8. Espesifikasyon

The following are the technical specifications for the Avaya EM200 Branch Expansion Unit (Model 700476401):

• Modèl: 700476401
• ASIN: B004XW34PE
• Manifakti: Avaya
• Dimansyon pake: 22.52 x 17.01 x 7.01 pous
• Pwa atik: 12.52 liv
• Dat premye disponib: 25 avril 2011
• Depatman: EM200 BRANCH EXPANSION UNIT NON GSA *700460538 GSA

9. Garanti ak sipò

For detailed warranty information, please refer to the warranty card included with your product or visit the official Avaya website. Technical support is available through your authorized Avaya reseller or directly from Avaya's support channels. Please have your product model number (700476401) and serial number ready when contacting support.

Avaya Official Websit: https://www.avaya.com/support