Entwodiksyon
Thank you for choosing the Olight T Series T15-T R5 Cree XP-G LED Flashlight. This compact and durable flashlight is designed for reliable illumination in various conditions. Featuring a Cree XP-G R5 LED, it offers three brightness levels and a strobe function, all housed in a solid aluminum body with an ultra-clear, anti-reflective lens. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your device.
Image: The Olight T15-T R5 Cree XP-G LED Flashlight, showcasing konsepsyon kontra enfòmèl ant li yo ak konstriksyon dirab li yo.
Enstalasyon
-
1. Premye Enspeksyon:
Upon unpacking, inspect the flashlight for any visible damage. Ensure all components, including the tail cap and head, are securely fastened.
-
2. Enstalasyon batri:
- Devise bouchon dèyè flach la lè w vire l nan sans kontrè ak zegwi mont lan.
- Insert one AA battery (not included) with the positive (+) terminal facing towards the head of the flashlight.
- Carefully screw the tail cap back on clockwise until it is finger-tight. Avoid over-tightening.
Nòt: Ensure correct battery polarity to prevent damage to the flashlight. Use high-quality AA batteries for optimal performance.
Enstriksyon Operasyon
-
1. Limen/Etenyen:
Press the tail switch completely to turn the flashlight ON. Press it again completely to turn the flashlight OFF.
-
2. Changing Brightness Levels:
With the flashlight ON, lightly press (half-press) the tail switch repeatedly to cycle through the three available brightness levels (Low → Medium → High). Release the switch to select the desired mode.
-
3. Activating Strobe Mode:
From any brightness mode, quickly double half-press the tail switch to activate the Strobe mode. Half-press again to return to the previous brightness level.
Antretyen
-
Netwayaj:
Wipe the flashlight body with a clean, soft cloth. For stubborn dirt, use a slightly damp twal. Pa sèvi ak pwodui chimik piman bouk oswa pwodui netwayaj abrazif.
-
Swen batri:
Remove the battery if the flashlight will not be used for an extended period to prevent leakage and potential damage. Dispose of used batteries responsibly.
-
O-Ring Lubrication:
Periodically inspect the O-rings for wear and tear. Apply a thin layer of silicone grease to maintain water resistance. Replace damaged O-rings promptly.
-
Netwayaj fil:
Keep the threads of the tail cap and head clean from dirt and debris to ensure smooth operation and proper electrical contact.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Flach pa limen. |
|
|
| Limyè a fèb oswa li ap tranble. |
|
|
| Tail switch is unresponsive. |
|
|
Espesifikasyon
- Modèl: T15-T
- Sous limyè: Cree XP-G R5 LED
- Maksimòm Klate: 115 lumèn
- Mòd: 3 brightness levels + Strobe
- Konstriksyon: Solid aluminum
- Lantiy: Ultra clear glass, non-scratch with anti-reflective coating
- Sous pouvwa: 1 x batri AA (pa enkli)
- Pwa: 45.4 g (san batri)
- Karakteristik: Shock-proof, dependable lighting
Garanti ak sipò
Olight products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Olight website. If you encounter any issues not covered in this manual or require further assistance, please contact Olight customer support.
Enfòmasyon pou kontakte: Please refer to your product packaging or the official Olight websit la pou jwenn enfòmasyon kontak ki pi resan pou sèvis kliyan an.
