1. Entwodiksyon
Thank you for choosing the Zefal Mini Frame Pump, Model 5601. This compact and durable pump is designed for convenient inflation of bicycle tires, compatible with both Presta and Schrader valves. This manual provides essential information for the proper setup, operation, and maintenance of your pump to ensure reliable performance.
2. Enfòmasyon sou Sekirite
- Always ensure the pump head is securely attached to the valve before inflating to prevent air leakage and potential injury.
- Do not overinflate tires. Refer to your tire's sidewall for recommended pressure (PSI/Bar) limits.
- Kenbe soti nan atenn timoun yo.
- Avoid exposing the pump to extreme temperatures or direct sunlight for prolonged periods.
- Inspect the pump regularly for any signs of damage or wear. Do not use if damaged.
3. Pake kontni
Your Zefal Mini Frame Pump package should contain the following items:
- Zefal Mini Frame Pump (Model 5601)
- Frame mounting bracket
4. Enstalasyon
4.1. Attaching the Frame Mounting Bracket
The Zefal Mini Frame Pump includes a bracket for convenient attachment to your bicycle frame, typically under a water bottle cage.
- Locate the water bottle cage mounting holes on your bicycle frame.
- Position the frame mounting bracket against these holes.
- Use the existing water bottle cage bolts (or provided bolts, if any) to secure the bracket to the frame. Ensure it is tightened firmly.
- Slide the Zefal Mini Frame Pump into the bracket. The pump should fit snugly and be held securely by the integrated strap or clip.
Figure 1: Zefal Mini Frame Pump, showing its compact design and potential for frame mounting.
4.2. Valve Compatibility (Presta and Schrader)
The Zefal Mini Frame Pump is designed to work with both common bicycle valve types:
- Valv Presta: Thinner, typically found on road bikes and higher-end mountain bikes. It has a small locknut at the top that needs to be unscrewed before inflation.
- Valv Schrader: Wider, similar to car tire valves, commonly found on mountain bikes and commuter bikes.
The pump head automatically adapts to both valve types. No manual adjustment is required.
Figi 2: Close-up view of the pump head, illustrating its design for valve attachment.
5. Operasyon Enstriksyon
5.1. Preparing the Tire Valve
- For Presta Valves: Unscrew the small locknut at the top of the valve stem counter-clockwise until it is loose. Press down briefly on the valve stem to release a small amount of air, ensuring it is open.
- For Schrader Valves: No special preparation is usually needed, but ensure the valve cap is removed.
5.2. Attaching the Pump to the Valve
- Place the pump head firmly onto the tire valve. Ensure it is pushed down completely and straight.
- Engage the thumb lock lever (if present) by pushing it down or flipping it to secure the pump head to the valve. This creates an airtight seal.
5.3. Inflating the Tire
- Hold the pump barrel firmly with one hand and the ergonomic handle with the other.
- Pump by pushing and pulling the handle smoothly and steadily.
- Continue pumping until the desired tire pressure is reached. Refer to the PSI/Bar recommendation on your tire's sidewall.
5.4. Detaching the Pump
- Once the tire is inflated, disengage the thumb lock lever (if present) by flipping it up or pulling it back.
- Carefully pull the pump head straight off the valve. A small hiss of air is normal.
- For Presta Valves: Screw the locknut back down clockwise until it is finger-tight to seal the valve.
- Replace the valve cap (if applicable).
6. Antretyen
- Netwayaj: Wipe the pump barrel and handle with a damp twal pou retire pousyè tè ak salte. Evite itilize pwodwi chimik piman bouk yo.
- Lubrifikasyon: Periodically, a small amount of silicone-based lubricant can be applied to the piston shaft to ensure smooth operation. Do not use petroleum-based lubricants as they can damage seals.
- Depo: Store the pump in a dry place, away from direct sunlight and extreme temperatures. When not in use, the handle locks in place.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Fwit lè lè w ap ponpe | Pump head not fully seated or thumb lock not engaged. Presta valve locknut not unscrewed. Damaged valve core. | Ensure pump head is pushed firmly onto the valve and the thumb lock is engaged. Unscrew Presta valve locknut. Check and replace valve core if necessary. |
| Tire not inflating | Pump head not sealed correctly. Tire puncture. | Re-attach pump head securely. Check tire for punctures and repair if found. |
| Pump handle stiff or difficult to operate | Lack of lubrication or dirt in the barrel. | Clean the pump barrel and apply a small amount of silicone lubricant to the piston shaft. |
8. Espesifikasyon
- Mak: ZEFAL
- Modèl: 5601
- Pwa atik: 92 gram
- Materyèl: Aluminum barrel
- Sous pouvwa: Handheld (Manual)
- Presyon maksimòm: 8 bar / 116 psi
- Valv konpatibilite: Presta ak Schrader
- Karakteristik: Locking rubberized ergonomic handle, Durable aluminum barrel, Frame mounting bracket included.
9. Garanti ak sipò
For warranty information or technical support, please refer to the ZEFAL official websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe resi acha w la kòm prèv acha.
ZEFAL Official Websit: www.zefal.com
