Manyèl Itilizatè Transfòmatè Alojèn MAXTRACK LT3L

1. Entwodiksyon

This manual provides essential information for the safe and efficient installation and operation of your MAXTRACK LT3L Halogen Transformer. This electronic transformer is designed for 230/12V halogen lamps with a power output range of 50-150W. It features overload protection and a thermal fuse for enhanced safety. Please note that this model is non-dimmable.

Imaj 1: Devan view of the MAXTRACK LT3L Halogen Transformer. This image displays the compact white casing of the transformer, with product specifications and basic wiring diagrams printed on its surface. The input and output terminals are visible on the ends.

2. Enstriksyon Sekirite

Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Danje elektrik: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations.
• Dekoneksyon pouvwa: Always disconnect power at the main circuit breaker before installing, servicing, or removing the transformer.
• Voltage konpatibilite: Asire vol D' atage (230V) and output voltage (12V) are compatible with your electrical supply and halogen lamps.
• Kapasite chaj: Do not exceed the maximum load of 150W. The minimum load is 50W. Operating outside this range may damage the transformer or lamps.
• Ki pa dimmable: This transformer is pa dimmable. Do not connect it to a dimmer switch.
• Vantilasyon: Ensure adequate ventilation around the transformer to prevent overheating. Do not cover the unit.
• Imidite: Do not expose the transformer to moisture or operate in damp kondisyon yo.
• Pwoteksyon tèmik: The transformer includes overload protection and a thermal fuse. If the unit shuts off, disconnect power, allow it to cool, and check for overload or short circuits before reconnecting.

3. Enstalasyon ak Enstalasyon

Follow these steps for proper installation of the MAXTRACK LT3L Halogen Transformer.

3.1 Koneksyon fil elektrik

1. Prepare fil elektrik yo: Ensure all wires are stripped to the appropriate length for secure connection to the terminal blocks. The transformer supports 0.75-2.5mm² cables for both primary and secondary connections.
2. Input (Primary) Connection:
   • Locate the input terminals marked "PRI: 220-240V" or "L" epi "N".
   • Connect the live wire from your 230V AC mains supply to the "L" tèminal.
   • Connect the neutral wire from your 230V AC mains supply to the "N" tèminal.
   • Asire koneksyon yo byen sere epi an sekirite.
3. Output (Secondary) Connection:
   • Locate the output terminals marked "SEC: ~11.6V". These are typically grouped for multiple lamp koneksyon.
   • Connect your 12V halogen lamps to these terminals. You can connect multiple lamps in parallel, ensuring the total wattage does not exceed 150W and is not below 50W.
   • Asire koneksyon yo byen sere epi an sekirite.
4. Sekirize fil elektrik: After making all connections, ensure the terminal covers are properly closed and secured.

Imaj 2: Fèmen view of the transformer with the terminal cover removed, revealing the green screw terminals for wiring connections. The input (PRI) and output (SEC) terminals are clearly visible, ready for electrical wiring.

Imaj 3: Another close-up showing the internal wiring terminals, indicating where the primary (220-240V) and secondary (11.6V) connections are made. This view provides a clearer perspective on the connection points for live, neutral, and lamp fil.

3.2 Montaj

The transformer is designed for rail mounting. Ensure it is mounted in a location that allows for adequate air circulation to prevent overheating. Avoid mounting near heat sources or in enclosed spaces without ventilation.

4. Operasyon

Once properly installed and connected, the MAXTRACK LT3L Halogen Transformer operates automatically. When power is supplied to the primary input, it converts the 230V AC to 12V AC for your halogen lamps. As this is a non-dimmable unit, it will provide constant power to the lamps when switched on.

5. Antretyen

The MAXTRACK LT3L Halogen Transformer requires minimal maintenance. Follow these guidelines:

• Netwayaj: Ensure the transformer is clean and free from dust and debris. Disconnect power before cleaning. Use a dry, soft cloth. Do not use liquid cleaners.
• Enspeksyon: Periodically inspect the wiring connections for any signs of loosening or damage.
• Vantilasyon: Ensure that the ventilation around the transformer remains unobstructed.

NAN. Depanaj

If you encounter issues with your transformer, refer to the following troubleshooting guide:

7. Espesifikasyon

8. Garanti ak sipò

Pou enfòmasyon sou garanti a ak sipò teknik, tanpri al jwenn machann nan oswa reprezantan ofisyèl manifakti a. website. Keep your proof of purchase for any warranty claims. Do not attempt to repair the unit yourself, as this will void the warranty and may pose a safety risk.