Renkforce 751402 IP65 Touchscreen Keypad Code Lock

1. Entwodiksyon

Thank you for choosing the Renkforce 751402 IP65 Touchscreen Keypad Code Lock. This device offers a secure and convenient access control solution, suitable for both indoor and outdoor environments. Its robust, waterproof zinc housing and modern glass surface with white backlighting ensure durability and aesthetic appeal.

This manual provides essential information for the proper installation, operation, and maintenance of your code lock. Please read it thoroughly before use to ensure optimal performance and safety.

Imaj: Devan view of the Renkforce 751402 IP65 Touchscreen Keypad Code Lock, showcasing its sleek design and illuminated numeric keypad.

2. Enstriksyon Sekirite

To prevent damage or injury, observe the following safety precautions:

• Li tout enstriksyon yo ak anpil atansyon anvan enstalasyon ak operasyon.
• Ensure the power supply meets the device's requirements. Incorrect voltage ka lakòz domaj.
• Do not attempt to open or modify the device. This will void the warranty and may cause malfunction.
• Kenbe aparèy la lwen jaden elektwomayetik fò.
• If the device is damaged, do not use it. Contact qualified personnel for repair.
• This product is IP65 rated for water and dust resistance, making it suitable for outdoor use. However, avoid submerging it in water.

3. Pake kontni

Verifye ke tout atik yo prezan epi yo an bon kondisyon:

• Renkforce 751402 IP65 Touchscreen Keypad Code Lock Unit (1x)
• Materyèl pou monte (vis, ploge miray)
• Manyèl Enstriksyon (dokiman sa a)

4. Enstalasyon ak Enstalasyon

The Renkforce 751402 is designed for surface mounting (on-wall installation). Professional installation is recommended for electrical connections.

1. Chwazi yon kote: Select a suitable, secure location on a wall, ensuring it is within reach of necessary wiring (power, door strike, alarm, etc.). The IP65 rating allows for outdoor placement.
2. Make pwen perçage yo: Use the device or a template to mark the drilling points for mounting screws on the wall.
3. Fè twou: Drill holes at the marked points and insert appropriate wall plugs if necessary.
4. Fil elektrik: Connect the necessary wires (power, lock control, alarm output, door contact input) to the terminal block inside the unit. Refer to the wiring diagram provided with the product for specific connections. Ensure power is disconnected during wiring.
5. Monte inite a: Secure the code lock unit to the wall using the provided screws.
6. Aplike pouvwa: Once securely mounted and wired, connect the power supply. The keypad should illuminate, indicating it is ready for operation.

Imaj: Angle view of the Renkforce 751402 Code Lock, showing its side profile and robust construction suitable for wall mounting.

5. Operasyon Enstriksyon

The Renkforce 751402 features a touchscreen keypad with backlighting for easy operation. It supports up to 99 user codes, offering over 100 million possible code combinations.

5.1. Initial Setup and Master Code

Upon first power-up, the device will be in a default state. You must set a master code to manage user codes and settings. Refer to the specific programming guide included with your product for the exact sequence to set the master code. Typically, this involves entering a default administrator code (e.g., 123456) followed by a programming key, then entering your new master code.

5.2. Adding User Codes

To add a new user code:

1. Enter the Master Code, followed by the programming key (e.g., '*').
2. Select the option to add a new user code (e.g., '1').
3. Enter the desired new user code (e.g., 4-6 digits).
4. Confirm the user code by entering it again or pressing a confirmation key (e.g., '#').
5. The device will typically provide an audible or visual confirmation of successful programming.

5.3. Opening the Lock

To open the connected lock:

1. Touch the keypad to activate the backlighting.
2. Antre yon kòd itilizatè valab.
3. Press the confirmation key (e.g., '#').
4. The lock will disengage for a preset duration, allowing access.

5.4. Deleting User Codes

To delete a user code, follow a similar process to adding, but select the delete option and enter the specific user code to be removed.

6. Antretyen

The Renkforce 751402 code lock requires minimal maintenance due to its durable construction and IP65 rating.

• Netwayaj: Siye sifas vè a ak yon twal mou,amp cloth. Avoid abrasive cleaners or solvents that could damage the finish or touchscreen.
• Enspeksyon: Periodically check the mounting screws for tightness and inspect the wiring for any signs of wear or damage.
• Pwoteksyon anviwònman: While IP65 rated, extreme weather conditions (e.g., prolonged direct sunlight, heavy ice buildup) may affect performance. Ensure proper drainage around the unit if installed outdoors.

NAN. Depanaj

If you encounter issues with your Renkforce 751402, refer to the following common problems and solutions:

8. Espesifikasyon

Technical details for the Renkforce 751402 IP65 Touchscreen Keypad Code Lock:

9. Garanti ak sipò

Renkforce provides a minimum 2-ane garanti apati dat acha pwodui sa a. Garanti sa a kouvri domaj nan materyèl ak nan fabrikasyon anba itilizasyon nòmal.

If you experience any issues with your Renkforce 751402 code lock, or require technical assistance, please contact your retailer or the Renkforce customer support team. Have your purchase receipt and product model number (751402) ready when contacting support.