Entwodiksyon
This manual provides essential information for the proper setup, operation, and maintenance of your Fender '65 Princeton Reverb Guitar Amplifier. The '65 Princeton Reverb is a 15-watt all-tube amplifier designed for versatile use in various settings, from home practice to recording studios and small live performances. It features classic Fender tube tone, dynamic clean and overdriven sounds, and integrated long-spring reverb and tube vibrato effects.
Karakteristik kle yo enkli:
- 15-watt all-tube amplification with tube rectification.
- Equipped with a 1-10" Jensen C-10R, 8 Ohm, 40 Watt Speaker with Ceramic Magnet.
- Integrated long-spring Fender reverb and tube vibrato effects.
- Gen ladann yon amplifier cover and a 2-button footswitch for remote control of reverb and vibrato.
Figi 1: Devan view of the Fender '65 Princeton Reverb Guitar Amplaviyè, montreasing its classic black Tolex finish and silver grille cloth.
Enstalasyon
- Debake: Retire ak anpil atansyon amplifier from its packaging. Retain all packing materials for future transport or storage.
- Plasman: Pozisyon an amplifier on a stable, level surface. Ensure adequate ventilation around the unit to prevent overheating. Avoid placing the amplifter toupre sous chalè oswa anba limyè solèy dirèk.
- Koneksyon pouvwa: Asire w la amplifier's power switch is in the 'OFF' position. Connect the supplied power cord to the amplifier's AC inlet and then to a grounded electrical outlet. Verify that the outlet provides the correct voltage pou rejyon ou.
- Koneksyon Enstriman: Connect your guitar or other instrument to one of the 'INSTRUMENTS' input jacks (Input 1 or Input 2) using a high-quality instrument cable. Input 1 typically offers higher sensitivity than Input 2.
- Footswitch Connection (Optional): If using the included 2-button footswitch, connect it to the 'FOOTSWITCH' jack on the amplifier's rear panel. This allows remote activation of the Reverb and Vibrato effects.
Enstriksyon Operasyon
Abitye tèt ou ak la amplifier's front panel controls:
- Pouvwa switch: Vire a amplifier ON or OFF. Allow a brief warm-up period after turning on.
- Volim: Kontwole nivo pwodiksyon an jeneral nan amplifier.
- Treble: Ajiste repons frekans segondè a. Vire nan sans zegwi mont lan pou ton ki pi klere, nan sans kontrè zegwi mont lan pou ton ki pi cho.
- Bass: Ajiste repons frekans ki ba a. Vire nan sans zegwi mont lan pou plis bas, nan sans kontrè zegwi mont lan pou mwens bas.
- Reverb: Controls the intensity of the built-in spring reverb effect.
- Vitès: Adjusts the rate of the vibrato effect.
- Entansite: Adjusts the depth or prominence of the vibrato effect.
Premye pouvwa-up:
- Ensure all volume and effect controls are set to their minimum positions.
- Flip the power switch to the 'ON' position. The pilot light will illuminate.
- Allow approximately 30-60 seconds for the tubes to warm up.
- Slowly increase the 'Volume' control to your desired listening level. Adjust 'Treble' and 'Bass' for tonal preference.
- Experiment with the 'Reverb', 'Speed', and 'Intensity' controls to achieve desired effects.
Figi 2: Entèn view nan la amplifier, highlighting the vacuum tubes which are crucial for its tonal characteristics.
Antretyen
- Netwayaj: Sèvi ak yon twal mou, sèk pou netwaye ampeksteryè lifizè a. Evite pwodui netwayaj abrazif oswa solvan.
- Swen Tib: Vacuum tubes have a finite lifespan. If you notice a decrease in performance, unusual noise, or a change in tone, tubes may need replacement. Consult a qualified technician for tube replacement.
- Depo: Lè ou pa itilize, estoke amplifier in a dry, temperature-controlled environment. Use the included amplifier cover to protect it from dust and minor impacts.
- Transpò: Always power off and unplug the amplifier before moving it. Use proper lifting techniques due to its weight.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen pwodiksyon son | Power cord disconnected, instrument cable faulty, volume set to zero, speaker disconnected. | Check power and instrument cables. Ensure volume is up. Verify speaker connection. |
| Chanson oswa bri buz | Ground loop, faulty instrument cable, proximity to other electronics, worn tubes. | Try a different outlet. Use shielded cables. Move away from other devices. Consult technician for tube inspection. |
| Son fèb oswa defòme | Worn tubes, incorrect instrument input, speaker damage. | Check instrument input. Consult technician for tube or speaker inspection. |
| Reverb or Vibrato not working | Footswitch disconnected or faulty, effect controls set to zero, internal component failure. | Check footswitch connection and functionality. Ensure effect controls are adjusted. Consult technician. |
If troubleshooting steps do not resolve the issue, contact Fender customer support or a qualified service technician.
Espesifikasyon
- Mak: Fender
- Modèl: '65 Princeton Reverb
- Nimewo Modèl Atik: 2172000000
- Sòti Wattage: 15 Watts
- Oratè: 1-10" Jensen C-10R, 8 Ohm, 40 Watt Speaker with Ceramic Magnet
- Dimansyon pwodwi: 28.25 x 22.5 x 12.25 inches (Length x Height x Depth)
- Pwa atik: 34 liv
- Koulè: Nwa
- Materyèl: Metal, bwa
- Aparèy konpatib: gita
- Manifakti: Fender Musical Instruments Corp.
Figure 3: Dimensional diagram of the amplifier, indicating its length, height, and depth.
Garanti ak sipò
Fender products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your amplifier or visit the official Fender website. For technical support, service, or replacement parts, please contact Fender customer service through their official channels. Always provide your model number (2172000000) and serial number when seeking support.
Resous sou entènèt: For additional information, product registration, and support, visit the official Fender websit.
