1. Entwodiksyon
This manual provides essential instructions for the proper use, maintenance, and care of your Waring Commercial WSB60ST 16-inch Stainless Steel Immersion Blender Shaft. This shaft is designed as an interchangeable accessory for specific Waring Big Stix immersion blender power units, offering versatility and durability for commercial kitchen environments.
Image 1.1: The Waring Commercial WSB60ST 16-inch Stainless Steel Immersion Blender Shaft. This component is designed for attachment to compatible Waring Big Stix power units.
2. Enfòmasyon sou Sekirite
Always observe basic safety precautions when using electrical appliances, especially in a commercial setting. This shaft is an accessory and must be used with a compatible Waring Big Stix immersion blender power unit.
- Li tout enstriksyon yo: Before using the immersion blender shaft, read all operating instructions for the compatible power unit.
- Bon atachman: Ensure the shaft is securely attached to the power unit before operation.
- Sekirite lam: The cutting blade is sharp. Handle with care to prevent injury.
- Nivo likid: Do not immerse the power unit in liquid. Only the shaft is designed for immersion.
- Sipèvizyon: Sipèvizyon sere se nesesè lè nenpòt aparèy itilize pa oswa toupre timoun yo.
- Antretyen: Perform maintenance and cleaning only when the power unit is unplugged.
3. Pake kontni
Verifye ke tout konpozan yo prezan lè w ap debale l:
- One (1) Waring Commercial WSB60ST 16-Inch Immersion Blender Shaft
4. Enstalasyon
The WSB60ST shaft is designed for easy interchangeability with compatible Waring Big Stix immersion blender power units. Compatible models include WSB25X, WSB50, WSB55, WSB60, WSB65, WSB70, and WSBPPW.
- Ensure Power Unit is Off and Unplugged: Before attaching or detaching the shaft, always ensure the immersion blender power unit is switched off and disconnected from the power supply.
- Aliyen epi tache: Align the top of the WSB60ST shaft with the coupling mechanism on the bottom of the power unit. Push the shaft firmly upwards and twist clockwise until it locks securely into place.
- Verifye Koneksyon: Gently pull down on the shaft to ensure it is fully engaged and will not detach during operation.
5. Operasyon Enstriksyon
Once the WSB60ST shaft is securely attached to a compatible Waring Big Stix power unit, you can proceed with blending operations. Refer to your power unit's instruction manual for specific operating procedures, speed controls, and safety guidelines.
- Prepare engredyan: Place ingredients in a suitable container for blending. Ensure the container is deep enough to accommodate the 16-inch shaft and prevent splashing.
- Immerse Shaft: With the power unit unplugged, immerse the blending end of the shaft into the ingredients before turning on the power. Ensure the liquid level does not exceed the maximum immersion line, if indicated on your power unit.
- Kòmanse melanje: Plug in the power unit and select the desired speed setting. Begin blending, moving the shaft gently up and down and around the container to ensure thorough processing.
- Fini melanj lan: Once blending is complete, turn off the power unit and unplug it from the outlet. Remove the shaft from the ingredients.
6. Antretyen ak netwayaj
Proper cleaning and maintenance extend the life of your immersion blender shaft and ensure hygienic operation.
- Dekonekte pouvwa: Always unplug the power unit from the electrical outlet before cleaning or performing any maintenance.
- Detache aks la: Twist the shaft counter-clockwise and pull down to detach it from the power unit.
- Netwayaj: The WSB60ST shaft is completely sealed and dishwasher safe. For manual cleaning, wash the shaft thoroughly with warm, soapy water. Use a brush to clean around the blade area carefully. Rinse thoroughly with clean water.
- Siye: Allow the shaft to air dry completely before storage or reattachment.
- Depo: Store the shaft in a clean, dry place.
NAN. Depanaj
If you encounter issues with your WSB60ST immersion blender shaft, consider the following:
- Shaft not attaching securely: Ensure the shaft is aligned correctly with the power unit's coupling and twisted until it locks. Check for any obstructions in the coupling mechanism.
- Pòv pèfòmans melanj: This is typically related to the power unit or the ingredients. Ensure the power unit is functioning correctly and that ingredients are suitable for immersion blending.
- Bri oswa vibrasyon dwòl: Discontinue use immediately. Check for any damage to the shaft or blade. If damage is present, replace the shaft.
For issues not resolved by these steps, contact Waring Commercial customer support.
8. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Nimewo Modèl | WSB60ST |
| Longè arbr | 16 pous |
| Materyèl | Nerjaveèi asye |
| Konpatibilite | Waring Big Stix Immersion Blenders (WSB25X, WSB50, WSB55, WSB60, WSB65, WSB70, WSBPPW) |
| Netwayaj | Dishwasher Safe |
| Dimansyon pwodwi | 16 x 16 x 4.2 inches (approximate, as part of full unit) |
| Pwa atik | 2.78 liv (apeprè) |
9. Garanti ak sipò
For information regarding warranty coverage, service, or technical support for your Waring Commercial products, please refer to the documentation provided with your original Waring Big Stix immersion blender power unit or visit the official Waring Commercial websit la. Kenbe resi acha ou kòm prèv acha pou reklamasyon garanti.
Manifakti: Conair LLC Waring Commercial Inc. (BISS)
