LEDVANCE Sylvania 20819 T5 Fluorescent Tube Light Bulb User Manual

1. Entwodiksyon

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Sylvania 20819 T5 Fluorescent Tube Light Bulb. Please read this manual thoroughly before installation and retain it for future reference.

2. Enfòmasyon sou Sekirite

Toujou obsève prekosyon sekirite sa yo pou evite blesi oswa domaj:

• Dekonekte pouvwa: Always turn off the power at the circuit breaker or fuse box before installing, removing, or servicing the bulb.
• Bon enstalasyon: Ensure the fixture is designed for T5 fluorescent bulbs with a G5 bi-pin base and the specified wattage (8W).
• Manyen ak Swen: Fluorescent bulbs are made of glass and can break. Handle them carefully to avoid injury.
• Dispozisyon: Dispose of used fluorescent bulbs according to local regulations, as they may contain small amounts of mercury. Do not dispose of in regular household waste.
• Itilize andedan kay la sèlman: Anpoul sa a fèt pou itilizasyon andedan kay la sèlman.
• Dimmable konpatibilite: This bulb is dimmable. Ensure your dimmer switch and fixture are compatible with dimmable fluorescent lamps.

3. Pwodwi souview

The LEDVANCE Sylvania 20819 is an 8-watt, 12-inch (MOL) T5 fluorescent tube light bulb featuring a G5 bi-pin base. It provides 400 lumens of warm white light at a 3000K color temperature with a frosted finish. This bulb is designed for general illumination in compatible fixtures.

Figi 1: Sylvania 20819 T5 Fluorescent Tube Light Bulb. This image shows the clear glass tube and the silver-colored G5 bi-pin base with two gold-colored pins at one end.

4. Enstalasyon

Follow these steps to install the fluorescent tube light bulb:

1. Etenn pouvwa: Ensure the power supply to the fixture is completely off at the circuit breaker or fuse box before beginning installation.
2. Retire ansyen anpoul la (si sa aplikab): If replacing an existing bulb, carefully twist and pull the old bulb from its sockets. Dispose of it properly.
3. Mete yon nouvo anpoul: Align the two pins of the G5 bi-pin base with the slots in the fixture's lamp holders. Gently push the bulb into the sockets until it clicks securely into place. Do not force the bulb.
4. Verifye Koneksyon: Ensure the bulb is firmly seated in both lamp moun ki gen yo.
5. Retabli pouvwa: Once the bulb is securely installed, restore power to the fixture from the circuit breaker or fuse box.

5. Operasyon

After installation, the bulb is ready for operation. Use the fixture's switch to turn the light on and off. If connected to a compatible dimmer, adjust the light output as desired.

6. Antretyen

Minimal maintenance is required for this fluorescent bulb.

• Netwayaj: Ensure the power is off before cleaning. Wipe the bulb gently with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
• Ranplasman: Replace the bulb when it reaches the end of its operational life (approximately 7,500 hours) or if it shows signs of failure (e.g., flickering, dimming, blackening ends).

NAN. Depanaj

If the bulb does not operate correctly, consider the following:

• Anpoul pa limen:
  • Tcheke si ekipman pou kouran an mache.
  • Ensure the bulb is correctly seated in the lamp moun ki gen yo.
  • Inspect the bulb for visible damage (e.g., broken glass, loose pins).
  • Test with a known working bulb in the same fixture, or test this bulb in a known working fixture, to determine if the issue is with the bulb or the fixture/ballast.
• Flickering:
  • Flickering can occur at the end of a fluorescent bulb's life. Replace the bulb if it is old.
  • Ensure the bulb is fully seated.
  • Check for proper ballast operation in the fixture.
• Pwoblèm gradyasyon:
  • Confirm that both the bulb and the dimmer switch are compatible with dimmable fluorescent lamps.
  • Ensure the dimmer switch is functioning correctly.

If problems persist after troubleshooting, contact customer support.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information and customer support, please refer to the details below:

Deskripsyon garanti: For US & Canadian customer questions or support, please call us at 1-800-LIGHTBULB (1-800-544-4828).

For further assistance, you may also visit the official LEDVANCE websit oswa kontakte revandè ou a.