1. Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your Arc Audio FD2200 2-Channel Car AmpTanpri li manyèl sa a avèk atansyon anvan ou eseye enstale oswa itilize li. amplifier to ensure proper function and safety.
2. Enfòmasyon sou Sekirite
Toujou obsève prekosyon sekirite sa yo:
- Dekonekte batri machin nan anvan ou fè nenpòt koneksyon elektrik.
- Asire w ke tout fil elektrik yo byen pase epi byen sere pou anpeche domaj oswa kous kout.
- Evite enstale amplifter nan kote ki ekspoze a limyè solèy dirèk, chalè twòp, imidite oswa pousyè.
- Sèvi ak fil elektrik ki gen bon kalib pou koneksyon kouran ak tè pou evite surchof.
- Consult a professional installer if you are unsure about any aspect of the installation.
3. Pwodwi souview
The Arc Audio FD2200 is a high-performance 2-channel car amplifier designed to deliver clear and powerful audio. It features robust construction and advanced protection circuits.
Image 1: Arc Audio FD2200 2-Channel Car Amplavi. Imaj sa a montre tèt la view nan la amplaviyè, montreasing its black and silver casing with the Arc Audio logo and model number.
Karakteristik kle:
- 12dB stereo crossover with x10 range switch (55Hz to 5.5KHz)
- High/low/full range selector switch
- Mono/stereo/bridged select feature
- 18dB bass control at 45Hz
- Protection against reverse voltage, sou voltage, speaker short, and thermal overload
- Konstriksyon lou-devwa
4. Enstalasyon ak Enstalasyon
Bon enstalasyon enpòtan anpil pou pèfòmans ak sekirite optimal. Li rekòmande pou genyen sa a amplifier enstale pa yon pwofesyonèl ki kalifye.
4.1 Kote montaj
Chwazi yon kote pou monte ki:
- Sèk epi byen ayere.
- Protected from direct sunlight and excessive heat.
- An sekirite epi san vibrasyon.
- Aksesib pou fil elektrik ak ajisteman.
4.2 Koneksyon fil elektrik
Swiv direktiv sa yo pou koneksyon elektrik yo:
- Pouvwa (B+): Konekte yon kab kouran ki gen fizyon dirèkteman soti nan tèminal pozitif batri machin nan rive nan amplifier's B+ terminal. Ensure the fuse is located within 18 inches of the battery.
- Tè (GND): Konekte yon kab tè kout, epè ki soti nan amptèminal GND adaptè a sou yon sifas metal pwòp, ki pa pentire sou chasi machin nan.
- Kontwòl a distans (REM): Konekte yon fil pou limen a distans soti nan pwodiksyon a distans inite prensipal ou a nan amptèminal REM lavitè a.
- Antre RCA: Konekte kab RCA yo ki soti nan pre-inite prensipal ou a.amp rezilta nan ampjack antre RCA lifer la.
- Rezilta Oratè: Konekte fil oratè yo soti nan amplifier's speaker terminals to your speakers. Observe correct polarity (+ to + and - to -).
5. Operasyon Enstriksyon
Yon fwa enstale, la amplifier requires proper configuration for optimal audio performance.
5.1 Akeri Ajisteman
Kontwòl gen an koresponn ak amplifier's input sensitivity to the output of your head unit. Start with the gain set to minimum and slowly increase it until you hear distortion, then back off slightly.
5.2 Anviwònman kwazman
Use the 12dB stereo crossover with the x10 range switch to set the desired frequency range for your speakers. The high/low/full range selector switch allows you to choose the appropriate mode:
- High Pass: Filters out low frequencies, suitable for full-range speakers or tweeters.
- Pase ki ba: Filters out high frequencies, suitable for subwoofers.
- Ranje konplè: Allows all frequencies to pass through, typically used for full-range speakers without a separate subwoofer.
5.3 Bass Booste
The 18dB bass control at 45Hz can be used to enhance low-frequency output. Use this feature sparingly to avoid distortion and potential speaker damage.
5.4 Mono/Stereo/Bridged Select
This switch allows you to configure the amplifier for different output modes:
- Stereo: Standard 2-channel operation for two speakers.
- Mono: Combines both channels into a single output, typically for a single subwoofer.
- Pon: Combines the power of both channels into a single, higher-power output, usually for a single, high-power subwoofer. Refer to the specifications for bridged power output.
6. Antretyen
The Arc Audio FD2200 ampLififier a mande mwens antretyen pou asire pèfòmans alontèm.
- Kenbe la ampLimyè a pwòp epi san pousyè ak debri. Sèvi ak yon twal mou epi sèk pou netwaye.
- Asire bon jan vantilasyon alantou an ampLimyè pou anpeche surchof. Pa bloke najwa refwadisman yo.
- Tcheke tout koneksyon fil elektrik yo detanzantan pou wè si yo sere epi si gen korozyon.
NAN. Depanaj
Si ou fè eksperyans pwoblèm ak ou amplifier, gade pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen pouvwa / pa gen son | Fuzib boule, fil kouran/tè/telekòmand ki lach, amplifier nan mòd pwoteksyon. | Check fuses (battery and amplifier). Verify all power, ground, and remote connections are secure. Check for short circuits in speaker wiring. |
| Son defòme | Gain an twò wo, move paramèt kwazman, siyal antre ki pa bon kalite. | Reduce gain. Adjust crossover settings. Check RCA cables for damage. |
| Ampsurchof lifter | Inadequate ventilation, impedance too low, prolonged high-power operation. | Asire bon jan koule lè toutotou a amplifier. Verifye enpedans oratè a koresponn amplifier capabilities. Reduce volume or operating time. |
| Noise/Hissing | Ground loop, poor quality RCA cables, improper gain setting. | Ensure a solid ground connection. Use shielded RCA cables. Adjust gain. |
If the problem persists after attempting these solutions, contact Arc Audio customer support or a qualified service technician.
8. Espesifikasyon
The following are the technical specifications for the Arc Audio FD2200 amplifier:
- Pouvwa Sòti (RMS):
- 100 Watts x 2 @ 4 ohms
- 185 Watts x 2 @ 2 ohms
- 360 Watts x 1 @ 4 ohms (bridged)
- Transient Distortion: <0.1% @ 4 ohms
- Repons frekans: 20Hz - 20KHz
- Signal-to-Noise Ratio (A-weighted): > 98dB
- Bass ranfòse: +18dB @ 45Hz
- Sansiblite Antre: 250mV - 2.5V
- Kwazman: 55Hz - 5.5KHz variable 12dB
- fuse: 45A x 1
- Dimensions (with endcaps): 10 3/8" x 16 3/4" x 2 3/8"
- Dimensions (without endcaps): 10 3/8" x 13 1/2" x 2 3/8"
- Pwa atik: 12 liv
- Voltage: 12 Vòlt (DC)
9. Garanti ak sipò
Arc Audio products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Arc Audio website. For technical support or service inquiries, please contact Arc Audio customer service directly.
Enfòmasyon pou kontakte:
- Websit: www.arcaudio.com (Egzamplyen an, lyen aktyèl la ka varye)
- Sèvis Kliyan: Gade nan websit pou metòd kontak aktyèl yo.
