InSinkErator F-C1100C Cold Water Dispenser Faucet Instruction Manual

1. Entwodiksyon

Thank you for choosing the InSinkErator F-C1100C Cold Water Dispenser Faucet. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new faucet. The F-C1100C is designed to deliver cold drinking water directly at your kitchen sink when paired with a compatible InSinkErator cold water tank, such as the CWT-00 model. Its elegant chrome finish and high-arching spout complement various kitchen decors.

2. Enfòmasyon sou Sekirite

Please read all instructions carefully before installing or using this product. Failure to follow these instructions may result in property damage or personal injury.

• Toujou fèmen tiyo prensipal dlo a anvan ou kòmanse nenpòt enstalasyon oswa antretyen.
• Asire w tout koneksyon yo byen fèm epi pa gen flit anvan ou retabli rezèv dlo a.
• This faucet is designed for cold water dispensing only. Do not connect to a hot water supply.
• Professional installation is recommended if you are unfamiliar with plumbing procedures.
• Kenbe timoun yo lwen zòn enstalasyon an.

3. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• InSinkErator F-C1100C Cold Water Dispenser Faucet (Chrome)
• Mounting hardware (washers, nuts, etc.)
• Connection tubing/hoses
• Enstriksyon enstalasyon (manyèl sa a)

Figi 1: InSinkErator F-C1100C Cold Water Dispenser Faucet. This image displays the InSinkErator F-C1100C cold water dispenser faucet. It features a high-arching spout and a single lever handle, all in a polished chrome finish. The design is transitional, suitable for various kitchen decors.

4. Espesifikasyon

5. Enstalasyon

This faucet requires a standard single-hole deck mount installation. It is designed to connect to a separate cold water tank (e.g., InSinkErator CWT-00) for chilled water delivery. Refer to the cold water tank's instruction manual for its specific installation requirements.

Zouti ak Materyèl (Pa enkli):

• Kle reglabl
• Phillips tèt tournevis
• Basin kle (opsyonèl, pou espas sere)
• Mastik plonbye oswa selan silikon
• Teflon tep
• Drill (if creating a new mounting hole)

Etap enstalasyon:

1. Prepare twou montaj la: Ensure a standard 1-3/8 inch (35mm) diameter hole is available on your sink or countertop. If drilling a new hole, follow the sink or countertop manufacturer's instructions.
2. Monte tiyo a:
   • Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet.
   • Insert the faucet shank through the mounting hole.
   • From underneath the sink, slide the rubber washer, then the metal washer, and finally thread the mounting nut onto the faucet shank.
   • Hand-tighten the nut, then use a basin wrench or adjustable wrench to secure it firmly, ensuring the faucet is properly aligned. Do not overtighten.
3. Konekte Tiyo Dlo yo:
   • Connect the faucet's cold water inlet line to the outlet of your InSinkErator cold water tank (e.g., CWT-00). Refer to the tank's manual for specific connection points.
   • Sèvi ak tep Teflon sou koneksyon filete yo pou asire yon sele ki pa kite dlo pase.
   • Ensure all connections are hand-tight, then tighten an additional 1/4 to 1/2 turn with a wrench.
4. Tcheke pou fwit:
   • Dousman vire sou rezèv dlo prensipal la.
   • Enspekte tout koneksyon yo pou wè si gen nenpòt siy flit. Sere koneksyon yo jan sa nesesè.
   • Allow water to run through the faucet for a few minutes to flush out any debris.

6. Operasyon

The InSinkErator F-C1100C faucet is designed for simple, hands-free operation to dispense cold water.

• Distribisyon dlo frèt: Gently push the lever handle backward (away from the spout) to activate the cold water flow. The lever is designed to stay on, providing continuous flow without needing to hold it.
• Stopping Water Flow: Push the lever handle forward (towards the spout) to stop the water flow.
• Pivot bec la: The high-arching spout can swivel for greater convenience, allowing you to direct the water flow as needed.

7. Antretyen

Proper care and maintenance will ensure the longevity and appearance of your InSinkErator F-C1100C faucet.

• Netwayaj Fini an: Netwaye fini chrome a regilyèman avèk yon twal mou.amp cloth and mild soap. Rinse thoroughly and dry with a soft cloth to prevent water spots.
• Evite netwayaj piman bouk: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or cleaners containing bleach, acids, or alcohol, as these can damage the finish.
• Antretyen Aeratè: If water flow becomes restricted, the aerator at the tip of the spout may be clogged. Unscrew the aerator, clean any debris, and rinse it before reattaching.
• Enspeksyon peryodik: Periodically check all connections under the sink for any signs of leaks or corrosion.

NAN. Depanaj

If you encounter issues with your F-C1100C faucet, refer to the following common problems and solutions:

9. Garanti ak sipò

For detailed warranty information, please refer to the documentation included with your product or visit the official InSinkErator website. If you require technical assistance or replacement parts, please contact InSinkErator customer support.

Ou ka jwenn plis enfòmasyon ak resous sipò lè w vizite Magazen InSinkErator sou Amazon.