Sonos Connect:AMP Manyèl itilizatè

Entwodiksyon

The Sonos Connect:AMP (formerly ZP120) transforms your traditional speakers into a modern music streaming system. This device allows you to wirelessly stream music to any room, utilizing your existing bookshelf, floor-standing, outdoor, or in-ceiling speakers. With 55 watts of amplifying power per channel, it delivers robust audio without the need for a separate receiver. Control your music experience effortlessly using the free Sonos apps available for Android smartphones, iPhones, or iPads.

Imaj: Angle view of the Sonos Connect:AMP, montreasing its compact design and top ventilation.

Ki sa ki nan bwat la

Upon unboxing your Sonos Connect:AMP, verify that all components are present:

• Sonos Connect:AMP (Model ZP120)
• Oratè fil
• Kòd pouvwa

Image: The retail packaging for the Sonos Connect:AMP, indicating the product name and brand.

Gid Enstalasyon

Follow these steps to set up your Sonos Connect:AMP and integrate it into your home audio system.

1. Connect Your Speakers

Connect your passive speakers to the speaker terminals on the back of the Connect:AMP. Ensure correct polarity (positive to positive, negative to negative) for optimal sound quality.

Imaj: Dèyè view of the Sonos Connect:AMP, showing Ethernet switch, analog audio inputs/outputs, subwoofer output, and speaker terminals.

2. Power On

Connect the power cord to the Connect:AMP and then to a wall outlet. The status indicator light on the front will illuminate.

3. Koneksyon rezo

For initial setup, it is recommended to connect the Connect:AMP to your router using an Ethernet cable. Once set up, you can configure it for wireless operation.

4. Download the Sonos App

Download the Sonos app on your smartphone or tablet. The app will guide you through the process of adding the Connect:AMP to your Sonos system and connecting it to your Wi-Fi network.

• Chèche pou "Sonos" in your device's app store.
• Enstale aplikasyon an.

5. Configure with Sonos App

Open the Sonos app and follow the on-screen instructions to set up your new Connect:AMP. This includes connecting it to your Wi-Fi network, naming the room, and adding music services.

Enstriksyon Operasyon

The Sonos Connect:AMP is primarily controlled via the Sonos app, but it also features physical controls for basic functions.

Using the Sonos App

The Sonos app provides comprehensive control over your Connect:AMP:

• Seleksyon Mizik: Browse and play music from your personal library, streaming services, and internet radio.
• Kontwòl Volim: Adjust the volume for individual rooms or groups of rooms.
• Grouping Rooms: Play the same music across multiple Connect:AMPs or other Sonos devices simultaneously.
• Anviwònman: Access advanced settings, including equalization, speaker balance, and network configuration.

Kontwòl Fizik

The front panel of the Connect:AMP features basic controls:

Imaj: Devan view of the Sonos Connect:AMP, highlighting the play/pause, volume up, and volume down buttons.

• Bouton jwe/poz: Press to play or pause the current audio.
• Volim moute (+): Peze pou ogmante volim.
• Volim desann (-): Peze pou diminye volim la.

Antretyen

Proper maintenance ensures the longevity and optimal performance of your Sonos Connect:AMP.

• Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye deyò aparèy la. Evite pwodui netwayaj abrazif oswa solvan.
• Vantilasyon: Ensure the Connect:AMP is placed in a well-ventilated area. Do not block the ventilation holes.
• Anviwònman: Keep the device away from excessive heat, humidity, and direct sunlight. It is designed for indoor use.
• Mizajou mikrolojisyèl: Regularly check for and install firmware updates via the Sonos app to ensure compatibility and access to new features.

Depanaj

If you encounter issues with your Sonos Connect:AMP, refer to the following common solutions.

Pa gen Son

• Verify that the Connect:AMP is powered on and the status light is illuminated.
• Check speaker wire connections at both the Connect:AMP ak moun kap pale yo.
• Ensure the volume is not muted or set too low in the Sonos app.
• Confirm that the correct audio source is selected in the Sonos app.

Pa ka konekte ak Wi-Fi

• Ensure your Wi-Fi network is active and broadcasting.
• Temporarily connect the Connect:AMP to your router with an Ethernet cable to complete setup, then configure wireless settings via the app.
• Restart your router and the Connect:AMP.
• Check for any Wi-Fi interference from other devices.

App Not Finding Connect:AMP

• Ensure your mobile device is connected to the same Wi-Fi network as the Connect:AMP.
• Restart the Sonos app.
• Power cycle the Connect:AMP by unplugging it for 10 seconds and plugging it back in.

Espesifikasyon

Garanti ak sipò

Enfòmasyon sou Garanti

The Sonos Connect:AMP vini ak yon Garanti limite. For specific terms and conditions, including warranty duration and coverage details, please refer to the official Sonos website or the warranty documentation included with your purchase. Keep your proof of purchase for warranty claims.

Sipò pou Kliyan

For further assistance, technical support, or service inquiries, please visit the official Sonos support website or contact their customer service. You can often find FAQs, troubleshooting guides, and contact information on their websit.

Note: As the Sonos Connect:AMP (ZP120) is a legacy product, support options may vary. Refer to Sonos's official policy regarding legacy products for the most current information.