Manyèl Itilizatè Alpine SWR-M100 10-pous 4-ohm Subwoofer Marin

1. Entwodiksyon

This manual provides essential information for the proper installation, operation, and maintenance of your Alpine SWR-M100 10-inch 4-ohm Marine Subwoofer. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

The Alpine SWR-M100 is designed to deliver deep bass in marine environments. It features a molded polypropylene cone with a Santoprene™ rubber surround, ensuring reliable performance and resistance to marine elements. The subwoofer is built with a high-strength polypropylene frame and a waterproof rubber mounting gasket, suitable for free-air applications.

2. Enfòmasyon sou Sekirite

Observe the following safety precautions to prevent injury or damage to the product and surrounding equipment:

• Toujou dekonekte tèminal negatif batri machin nan anvan ou kòmanse nenpòt travay enstalasyon.
• Asire w tout fil elektrik yo byen konekte epi izole pou anpeche kous kout.
• Do not expose the subwoofer to extreme temperatures or direct sunlight for prolonged periods.
• Use appropriate tools and follow all local and national electrical codes during installation.
• Konsilte yon pwofesyonèl kalifye si ou pa sèten sou nenpòt etap enstalasyon yo.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• Alpine SWR-M100 10-inch Marine Subwoofer
• Power cable (and possibly other necessary cables for connection)
• Montaj pyès ki nan konpitè (vis, rondelles, elatriye)
• Manyèl Itilizatè (dokiman sa a)

4. Enstalasyon ak Enstalasyon

Proper installation is crucial for optimal performance and durability of your marine subwoofer. The SWR-M100 is designed for free-air applications.

4.1 Kote montaj

Select a mounting location that is structurally sound and provides adequate clearance for the subwoofer's depth. Ensure the location is protected from direct water spray if possible, despite its marine-grade construction.

Figi 1: Devan view of the Alpine SWR-M100 Marine Subwoofer. This image displays the white grille and the central Alpine logo, indicating its robust design for marine environments.

4.2 Koneksyon fil elektrik

1. Koneksyon pouvwa: Connect the subwoofer to a suitable marine amplifier. Asire a amplifier can provide 300 watts RMS power at 4 ohms for optimal performance.
2. Koneksyon siyal: Konekte a amplifier's output to the subwoofer's terminals. Pay close attention to polarity (+ to + and - to -) to ensure correct phase and sound reproduction.
3. Atè: Ensure a secure and clean ground connection for the amplifier and any associated components to prevent noise and ensure stable operation.

4.3 Pwosedi monte

1. Prepare sifas montaj la: Cut an appropriate-sized hole in the chosen mounting location. Refer to the template provided with your subwoofer for precise dimensions.
2. Secure the Subwoofer: Place the subwoofer into the opening. Use the provided waterproof rubber mounting gasket between the subwoofer frame and the mounting surface to ensure a watertight seal.
3. Tache: Secure the subwoofer using the supplied mounting screws. Tighten screws evenly to prevent warping of the frame.

5. Operasyon Enstriksyon

Once installed, the Alpine SWR-M100 operates as part of your marine audio system. Follow these guidelines for optimal performance:

• AmpAnviwònman lifier: Ajiste ou amplifier's gain, crossover, and phase settings according to the subwoofer's specifications and your system's acoustics. A low-pass filter setting between 80Hz and 120Hz is typically recommended for subwoofers.
• Kontwòl Volim: Avoid operating the subwoofer at excessively high volumes for extended periods, which can lead to distortion and potential damage.
• Peryòd enskripsyon: Allow a short break-in period (approximately 10-20 hours of normal use) for the subwoofer's suspension to loosen, which can improve bass response.

6. Antretyen

Regular maintenance helps preserve the performance and appearance of your marine subwoofer:

• Netwayaj: Sèvi ak yon mou, damp cloth to wipe down the grille and frame. Avoid harsh chemicals or abrasive cleaners.
• Enspeksyon: Periodically inspect the mounting screws and wiring connections for tightness and corrosion.
• Pwoteksyon: When not in use, especially during storage, consider covering the subwoofer to protect it from dust and prolonged exposure to elements.

NAN. Depanaj

If you encounter issues with your Alpine SWR-M100, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Alpine customer support or a qualified service technician.

8. Espesifikasyon

9. Garanti ak sipò

The Alpine SWR-M100 Marine Subwoofer comes with a Garanti limiteTanpri gade kat garanti ki vini ak pwodwi w la pou kondisyon espesifik yo, tankou dire pwoteksyon an ak pwosedi pou fè reklamasyon yo.

For technical support, service, or warranty inquiries, please contact Alpine customer service through their official websit la oswa enfòmasyon kontak yo bay nan dokimantasyon pwodwi ou a.

Manifakti: Alpine

Dat premye disponib: 7 jiyè 2008