Progress Lighting P7206-30EB Fluorescent Light Fixture User Manual

Pwodwi souview

The Progress Lighting P7206-30EB is a contemporary flush mount fluorescent light fixture designed for various indoor applications such as kitchens or workshops. It features contoured white acrylic domes and curved trim, providing a pleasing halo effect. This fixture operates on a standard 120-volt HPF electric ballast and is designed for ceiling mount installation.

Figi 1: Devan view of the Progress Lighting P7206-30EB fluorescent light fixture, showcasing its contoured white acrylic domes and textured white molding.

Enfòmasyon sou Sekirite

AVÈTISMAN: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation, maintenance, or bulb replacement. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unsure about proper installation.

• Pa enstale aparèy sa a nan kote ki mouye oswa ki pa klere.amp kote yo ye.
• Asire w ke aparèy la byen monte sou yon eleman estriktirèl nan plafon an.
• Sèvi ak sèlman kalite anpoul espesifye ak wattage pou anpeche surchof ak domaj.
• Kenbe materyèl ki ka pran dife yo lwen aparèy limyè a.

Kontni pake

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact Progress Lighting customer service for assistance.

• (1) P7206-30EB Fluorescent Light Fixture
• (1) Mounting Hardware Kit (screws, wire nuts, etc.)
• Bulbs (4x 32W F32T8) are NOT included and must be purchased separately.

Espesifikasyon

Enstalasyon ak Enstalasyon

Enpòtan: Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring. Ensure power is disconnected at the main circuit breaker before proceeding.

1. Prepare Zòn Enstalasyon an:
   • Turn off power at the main circuit breaker or fuse box to the outlet box where the fixture will be installed.
   • Asire w ke sifas enstalasyon an pwòp, sèk, epi estriktirèlman solid.
2. Monte aparèy la:
   • Retire aparèy la nan anbalaj li avèk prekosyon.
   • Align the fixture's mounting holes with the outlet box or pre-drilled holes in the ceiling. This fixture is designed to cover a standard outlet box.
   • Secure the fixture to the ceiling using the provided mounting screws. Ensure it is firmly attached and does not wobble.
3. Koneksyon elektrik:
   • Connect the fixture's white wire to the white (neutral) wire from the outlet box using a wire nut.
   • Connect the fixture's black wire to the black (hot) wire from the outlet box using a wire nut.
   • Connect the fixture's ground wire (usually bare copper or green) to the house ground wire (usually bare copper or green) from the outlet box. If no house ground wire is present, connect to the green grounding screw on the mounting bracket.
   • Ak anpil atansyon mete tout fil nan bwat priz la.
4. Install Bulbs and Diffuser:
   • Insert four (4) 32-watt F32T8 fluorescent bulbs into the lamp holders. Ensure they are seated correctly.
   • Carefully place the white acrylic diffuser onto the fixture, ensuring it is securely in place.
5. Retabli pouvwa:
   • Remete kouran an nan disjonktè a oswa nan bwat fizib la.
   • Teste aparèy la pou asire li fonksyone byen.

Figure 2: The P7206-30EB fixture installed in a kitchen setting, demonstrating its flush mount appearance and illumination.

Enstriksyon Operasyon

The Progress Lighting P7206-30EB fixture is designed for simple operation. Once properly installed and wired to a wall switch, it functions like any standard light fixture.

1. Limen/Etenyen:
   • Flip the wall switch connected to the fixture to the "ON" position to illuminate the bulbs.
   • Flip the wall switch to the "OFF" position to turn off the light.

Antretyen

Antretyen regilye asire pèfòmans optimal ak lonjevite aparèy ekleraj ou a.

• Netwayaj:
  • Before cleaning, ensure the power to the fixture is turned off at the circuit breaker.
  • Wipe the exterior of the fixture and the acrylic diffuser with a soft, damp twal.
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
  • Allow the fixture to dry completely before restoring power.
• Ranplasman anpoul:
  • Koupe kouran aparèy la nan disjonktè a.
  • Carefully remove the acrylic diffuser.
  • Allow old bulbs to cool before handling. Gently twist and remove the old F32T8 fluorescent bulbs.
  • Insert new 32-watt F32T8 fluorescent bulbs, ensuring they are properly seated in the lamp moun ki gen yo.
  • Replace the acrylic diffuser.
  • Retabli pouvwa a epi teste aparèy la.

Depanaj

Si w gen pwoblèm ak aparèy ekleraj ou a, gade pwoblèm ak solisyon komen sa yo:

Si pwoblèm nan pèsiste apre ou fin eseye solisyon sa yo, kontakte yon elektrisyen kalifye oswa sèvis kliyan Progress Lighting.

Garanti ak sipò

Garanti: The Progress Lighting P7206-30EB fixture comes with a 1-ane garanti limite apati dat acha a. Garanti sa a kouvri domaj nan materyèl ak nan fabrikasyon anba itilizasyon nòmal. Li pa kouvri domaj ki soti nan move enstalasyon, aksidan, move itilizasyon, abi oswa reparasyon san otorizasyon.

Sipò Kliyan: For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer service. Refer to the official Progress Lighting websit la pou jwenn enfòmasyon kontak ki pi resan yo.

Tanpri konsève resi acha ou a kòm prèv acha pou rezon garanti.