Progress Lighting P5607-09 Outdoor Wall Lantern Instruction Manual

Entwodiksyon

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P5607-09 Outdoor Wall Lantern. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Image: Progress Lighting P5607-09 Outdoor Wall Lantern. This image displays the complete fixture, featuring a brushed nickel finish, clear flat glass panels, and a single exposed bulb.

Enfòmasyon enpòtan sou sekirite

AVÈTISMAN: Risk pou chòk elektrik. Dekonekte kouran an nan bwat fizib la oswa nan disjonktè a anvan enstalasyon oswa antretyen. Konsilte yon elektrisyen kalifye si ou pa sèten sou pwosesis enstalasyon an.

• Tout koneksyon elektrik yo dwe fèt an akò ak kòd lokal yo, òdonans yo, oswa Kòd Elektrik Nasyonal la (NEC).
• Use UL or ETL listed wire connectors suitable for the size, type, and number of conductors.
• Do not install this fixture in wet locations unless specifically rated for such use. This fixture is rated for outdoor use.
• Asire w ke aparèy la byen monte sou yon eleman estriktirèl.
• Pa depase wat maksimòm lantage espesifye pou anpoul la.
• Always handle glass components with care.

Kontni pake

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an. Si gen nenpòt pyès ki manke oswa ki domaje, pa eseye rasanble oswa enstale pwodwi a.

• Outdoor Wall Lantern Fixture (Model P5607-09)
• Materyèl pou monte (vis, boulon fil, plak pou monte)
• Fèy Enstalasyon
• Clear Flat Glass Panels

Image: Line drawing of the P5607-09 fixture, showing its basic outline and internal components. This diagram helps identify the model number and general structure.

Espesifikasyon

Enstalasyon & Plasman

This fixture is designed for outdoor wall mounting. Refer to the included "Installation Sheet" for detailed step-by-step wiring and mounting instructions. Always ensure power is disconnected at the circuit breaker before beginning any electrical work.

Fixture Sizing and Placement Guidelines

Proper sizing and placement are crucial for optimal aesthetic and functional lighting. Consider the following guidelines:

Ekleraj antre

• Wotè aparèy: Select fixtures that measure 1/4 to 1/3 of the door's height.
• Wotè Montaj: Mount the center of the fixture at eye level, approximately 5.5 to 6 feet from the ground.
• Espas: For double doors or wider entryways, mount lights on either side, 8 to 10 feet apart.

Image: A diagram illustrating how to size wall lanterns for an entryway. It shows a door and a wall lantern, with text indicating that wall lanterns should measure 1/4 the height of the door. An example is provided: a 96-inch door requires a 24-inch fixture height.

Image: An architectural drawing of a house front, demonstrating the recommended placement of two 24-inch tall wall lanterns flanking a 96-inch tall front door. This visually reinforces the 1/4 door height rule for fixture sizing.

Garage Lighting

• Single Car Garage: Use a single wall lantern to illuminate.
• Two or More Car Garages: Mount lights on either side of the garage doors, or across the top of the doors for even illumination.

Image: An architectural drawing of a house with a garage, illustrating the placement of two 24-inch tall wall lanterns flanking a 16-foot wide garage door. The text indicates that for a 16-foot door, a 24-inch height for each fixture is appropriate, following the 0.25 multiplier rule.

Operasyon

Once properly installed and wired, your P5607-09 Outdoor Wall Lantern operates like any standard outdoor light fixture. It can be controlled by a wall switch, dimmer switch (if using dimmable bulbs), or an external timer/photocell system (not included) connected to the circuit.

• Asire kalite anpoul ki kòrèk la ak wattage (up to 100W incandescent, medium base) are used.
• For optimal performance and energy efficiency, consider using LED bulbs compatible with outdoor fixtures.

Antretyen

Netwayaj

• Toujou dekonekte kouran anvan w netwaye.
• Pou netwaye aparèy la, siye l ak yon twal mou,amp twal.
• Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
• For glass panels, a mild glass cleaner can be used, applied to a cloth first, not directly to the fixture.

Ranplasman anpoul

• Ensure the power is turned off and the bulb has cooled completely before attempting to replace it.
• Carefully unscrew the old bulb and screw in a new medium base (E26) bulb, not exceeding 100 watts.
• Ensure the glass panels are securely re-installed after bulb replacement.

Depanaj

Garanti ak sipò

This Progress Lighting fixture comes with a 1-ane garanti limite. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support. For warranty claims or technical assistance, please contact Progress Lighting customer service.

For additional product information or support, visit the Progress Lighting Store.

Lòt Resous

Vitrine pwodwi