Manyèl Itilizatè Revèy Alam Karlsson KA4548 Gummy

Entwodiksyon

Welcome to the user manual for your new Karlsson KA4548 Gummy Alarm Clock. This battery-powered LCD alarm clock is designed for simplicity and functionality, featuring a unique rubberized casing that seamlessly integrates all control buttons. Its clear LCD display provides time at a glance, and the blue backlight activates only when the light button is pressed, ensuring no disruptive light emission during the night. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your alarm clock.

Enfòmasyon sou Sekirite

• Sekirite batri: Always use the specified battery type (3 AAA batteries). Do not mix old and new batteries, or different types of batteries. Remove batteries if the clock will not be used for an extended period to prevent leakage. Dispose of used batteries responsibly.
• Plasman: Place the alarm clock on a stable, flat surface. Avoid placing it in direct sunlight, near heat sources, or in areas with high humidity.
• Netwayaj: Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or immerse the clock in water.
• Timoun: Keep out of reach of small children. This product is not a toy.

Pwodwi souview

Figure 1: Karlsson KA4548 Gummy Alarm Clock. This image displays the Karlsson KA4548 Gummy Alarm Clock from a front-facing perspective. The clock features a black rubberized casing and a clear LCD screen with a blue backlight, currently displaying the time '10:50' in large, digital segments. The top of the clock shows subtle outlines of control buttons integrated into the rubber material.

Eleman:

• Ekspozisyon LCD: Montre lè, estati alam, ak lòt endikatè.
• Rubberized Casing: Durable and provides integrated button access.
• Bouton kontwòl: (Located on top/back, integrated into rubber) For setting time, alarm, snooze, and activating backlight.
• Lòj batri: Located on the back, for 3 AAA batteries.

Enstalasyon

Enstalasyon batri:

1. Jwenn konpatiman pil la sou dèyè revèy la.
2. Louvri kouvèti lòj batri a.
3. Insert 3 new AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Close the battery compartment cover securely. The LCD display should now turn on.

Enstriksyon Operasyon

Mete lè a:

1. Press the 'SET' button (or equivalent, typically integrated into the rubber casing). The hour digits will start flashing.
2. Use the '+' or '-' buttons (or up/down arrows) to adjust the hour.
3. Press 'SET' again to confirm the hour and move to the minute setting. The minute digits will flash.
4. Sèvi ak bouton '+' oswa '-' yo pou ajiste minit yo.
5. Press 'SET' one more time to confirm the minutes and exit time setting mode.

Mete alam la:

1. Press the 'ALARM SET' button (or similar, often labeled with an alarm icon). The alarm hour digits will start flashing.
2. Sèvi ak bouton '+' oswa '-' yo pou ajiste lè alam lan.
3. Press 'ALARM SET' again to confirm the alarm hour and move to the alarm minute setting. The alarm minute digits will flash.
4. Sèvi ak bouton '+' oswa '-' yo pou ajiste minit alam lan.
5. Press 'ALARM SET' one more time to confirm the alarm minutes and exit alarm setting mode.
6. Ensure the alarm is activated. There is usually a dedicated 'ALARM ON/OFF' switch or button. A small alarm icon should appear on the display when the alarm is active.

Fonksyon Snooze:

When the alarm sounds, press the 'SNOOZE' button (typically a large button on top). The alarm will temporarily stop and sound again after a few minutes (usually 5-9 minutes, depending on the model).

Fonksyon ekleraj:

To illuminate the display in the dark, press the 'LIGHT' button (often integrated with the snooze button). The blue backlight will activate for a few seconds and then turn off automatically to conserve battery life. The display does not remain continuously lit.

Antretyen

Netwayaj:

Wipe the clock's surface with a soft, dry, lint-free cloth. For stubborn marks on the rubber casing, a slightly damp cloth can be used, but ensure no moisture enters the electronic components. Do not use chemical cleaners, solvents, or abrasive materials.

Ranplasman batri:

When the display dims or the alarm function becomes unreliable, it is time to replace the batteries. Follow the battery installation steps outlined in the 'Setup' section. Always replace all three AAA batteries at the same time with new ones.

Depanaj

• Ekran an vid oswa li pa klere byen:
  Solisyon: Tcheke polarite pil yo. Ranplase yo ak pil AAA nèf.
• Alam lan pa sonnen:
  Solisyon: Ensure the alarm is set and activated (check for alarm icon on display). Verify that the time and alarm time are correctly set. Replace batteries if they are low.
• Backlight does not work or is very dim:
  Solisyon: Press the 'LIGHT' button firmly. If it still doesn't work, replace the batteries. Note that the backlight is designed to be momentary, not continuously lit.
• Bouton yo pa reponn:
  Solisyon: Ensure batteries are correctly installed and have sufficient power. Try removing and reinserting batteries to reset the device.
• Afichaj tan ki pa kòrèk:
  Solisyon: Reset the time following the 'Setting the Time' instructions.

Espesifikasyon

Garanti ak sipò

Pwodwi Karlsson yo fabrike selon estanda kalite siperyè. Pou enfòmasyon konsènan pwoteksyon garanti a, tanpri al gade kat garanti ki vini ak acha ou a oswa vizite sit entènèt ofisyèl Karlsson an. website. For technical support or further assistance, please contact Karlsson customer service through their official channels.