1. Entwodiksyon
This manual provides essential information for the safe and effective use of your JBC 30ST Soldering Iron. Designed for precision electronic work, this 25W soldering iron features a rapid heating system and is supplied with a durable, heat-resistant R-10D tip.
The JBC 30ST is a versatile tool, ideal for laboratory electronic work and circuit assembly, offering efficient heat utilization and quick temperature recovery.
2. Enfòmasyon sou Sekirite
Always read and understand all safety warnings and instructions before using this product.
- Sekirite elektrik: Ensure the soldering iron is connected to a properly grounded power outlet. Do not use with damaged cords or plugs. Disconnect from power when not in use or during maintenance.
- Danje boule: The soldering iron tip and surrounding metal parts reach very high temperatures (up to 380°C). Always use extreme caution to avoid contact with hot surfaces. Allow the iron to cool completely before storing.
- Fume Inhalation: Soldering produces fumes. Work in a well-ventilated area or use a fume extractor to avoid inhaling harmful fumes.
- Pwoteksyon je: Always wear safety glasses to protect your eyes from solder splashes or flying debris.
- Sifas travay: Use a heat-resistant work surface. Keep flammable materials away from the soldering area.
- Timoun ak bèt kay: Kenbe fè soude a lwen timoun ak bèt kay.
3. Pake kontni
Verifye ke tout atik yo prezan nan pakè ou a:
- 1 x JBC 30ST Soldering Iron
- 1 x R-10D Heat-Resistant Long-Life Tip (pre-installed or separate)
- 1 x Three-conductor power cable
This image displays the retail packaging for the JBC 30ST Soldering Iron. The box features the JBC logo, website (www.jbctools.com), and product descriptions in multiple languages including English ('Pencil Soldering Iron'), Spanish, French, German, and Italian. The soldering iron itself, with its distinctive blue and black handle and silver tip, is visible on the right side of the packaging. The model number '30 ST' and power '230V-25W' are also printed on the side of the tool.
4. Enstalasyon
- Debake: Ak anpil atansyon retire tout eleman nan anbalaj la.
- Tip Installation (if not pre-installed): Ensure the soldering iron is unplugged and cool. Gently insert the R-10D tip into the heating element receptacle until it is seated firmly. Do not force it.
- Koneksyon pouvwa: Plug the three-conductor power cable into a compatible 220V grounded electrical outlet.
- Premye chofe: Once plugged in, the soldering iron will begin to heat. It takes approximately 2 minutes and 15 seconds to reach 300°C, with a maximum operating temperature of 380°C.
5. Operasyon Enstriksyon
Swiv etap sa yo pou soude byen:
- Fèblan ti konsèy la: Before first use and periodically during operation, apply a small amount of solder to the hot tip. This 'tins' the tip, protecting it from oxidation and ensuring efficient heat transfer.
- Netwaye pwent lan: Sèvi ak anonsamp sponge or brass wool tip cleaner to wipe off excess solder and oxidation from the tip before and after each use.
- Applying Heat: Place the clean, tinned tip against both the component lead and the solder pad simultaneously.
- Applying Solder: Once the joint is hot enough (typically a few seconds), apply solder to the opposite side of the joint from the iron. The solder should flow smoothly and quickly around the joint. Do not apply solder directly to the iron tip.
- Removing the Iron: Once the solder has flowed, remove the soldering iron first, then the solder. Allow the joint to cool undisturbed.
- Cool Down: When finished, unplug the soldering iron and place it in a safe, heat-resistant stand. Allow it to cool completely before handling or storing.
6. Antretyen
Bon antretyen pwolonje lavi fè soude ou a:
- Netwayaj konsèy: Regularly clean the tip using a damp sponge or brass wool. For stubborn oxidation, use a tip tinner/cleaner compound. A well-maintained tip will be shiny and accept solder easily.
- Ranplasman konsèy: Replace the tip when it becomes pitted, corroded, or no longer accepts solder easily, even after cleaning and tinning. Ensure the iron is cool and unplugged before changing tips.
- Handle and Cord: Keep the handle clean and free of solder. Inspect the power cord regularly for any signs of damage (cuts, fraying). If damaged, discontinue use and seek professional repair.
- Depo: Store the soldering iron in a dry, safe place, away from dust and moisture, once it has completely cooled.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Fè soudaj la pa chofe. | No power; Faulty heating element. | Check power outlet and cable connection. If still not heating, contact JBC support. |
| Solder does not melt or flow well. | Tip is oxidized or dirty; Insufficient heat transfer. | Clean and re-tin the tip. Ensure the tip is making good contact with the joint. |
| Tip turns black quickly. | Tip is not tinned; Running too hot; Using incorrect solder. | Always tin the tip. Ensure proper soldering technique. Use good quality solder. |
| Solder joints are dull or brittle. | Cold joint (insufficient heat); Movement during cooling. | Ensure components and pads are heated sufficiently. Do not move the joint until solder has solidified. |
8. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Nimewo Modèl | 3302040 (30ST) |
| Manifakti | JBC |
| Pouvwa | 25 Watts |
| Sous pouvwa | Electric Cable (220V mains) |
| Tanperati maksimòm | 380 °C |
| Time to reach 300 °C | 2 minit 15 segonn |
| Pwa (san kòd) | 40 gram |
| Weight (with cord) | 120 gram |
| Dimansyon pwodwi (L x W x H) | 30 x 6 x 4.9 cm |
| Manch Materyèl | Nylon |
| Karakteristik espesyal | Rezistan chalè |
| Konpozan ki enkli | R-10D heat-resistant long-life tip, three-conductor cable |
9. Garanti ak sipò
For warranty information, technical support, or spare parts availability, please refer to the official JBC website or contact your authorized JBC dealer. Keep your purchase receipt as proof of purchase.
JBC Official Websit: www.jbctools.com
