Entwodiksyon
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Progress Lighting P832-TG Remodel Recessed Lighting Housing. Designed for use in existing ceilings, this housing features an integral flange and exclusive locking bars for quick and secure mounting.
Please read this manual thoroughly before beginning installation to ensure proper setup and safe operation. Keep this manual for future reference.
Enfòmasyon sou Sekirite
AVÈTISMAN: To avoid fire, shock, or death; always turn off power at the circuit breaker or fuse box before wiring. All wiring must be in accordance with national and local electrical codes.
- Always disconnect power before installing, servicing, or cleaning this fixture.
- Enstalasyon ta dwe fèt pa yon elektrisyen kalifye.
- Asire w ke tout koneksyon an sekirite epi byen izole.
- This product is UL and CUL listed for damp locations. Do not install in wet locations.
- Rated for 60-degree supply wires in end-of-run applications.
- Rated for 4 #12 90-degree conductors (2 in and 2 out).
Pwopozisyon 65 Avètisman: Pwodui sa a ka ekspoze w a pwodui chimik ke Eta Kalifòni konnen ki lakòz kansè ak domaj nesans oswa lòt pwoblèm repwodiktif. Pou plis enfòmasyon, ale nan www.P65Warnings.ca.gov.
Pwodwi souview
The Progress Lighting P832-TG is a remodel recessed lighting housing designed for easy installation in existing ceilings. Its robust construction and thoughtful design ensure a secure fit and reliable performance.
Karakteristik kle:
- Integral flange on housing for a clean finish.
- Exclusive locking bars for quick mounting in ceilings from 1/2-inch to 1-inch thick.
- UL and CUL listed for damp locations and through wiring.
- Rated for 4 #12 90-Degree conductors (2 in and 2 out).
- Medium base lamp priz.
Eleman:
The P832-TG housing consists of a galvanized steel junction box, a flexible conduit connecting to the housing, and the main housing unit with integral flange and locking bars. It is designed to accommodate a medium base lamp and requires a separate trim for a complete fixture.
Figure 1: Progress Lighting P832-TG Recessed Lighting Housing. This image shows the main housing unit, the junction box, and the flexible conduit connecting them.
Figi 2: Dimansyon view of the P832-TG housing. Key dimensions include 11-3/8 inches width, 5-1/2 inches height, and 4-13/16 inches extension, with a 4-1/4 inch ceiling opening.
Enstalasyon ak Enstalasyon
Follow these steps for proper installation of the P832-TG housing in existing ceilings. Ensure power is disconnected at the circuit breaker before proceeding.
- Prepare Ceiling Opening: Create a 4-1/4 inch diameter opening in the ceiling at the desired location. Ensure there are no obstructions (joists, pipes, wires) within the installation area.
- Konekte fil elektrik: Open the junction box cover. Connect the building's electrical supply wires to the corresponding wires in the housing's junction box. Use appropriate wire connectors (not supplied). Ensure proper grounding. The housing is rated for 4 #12 90-degree conductors (2 in and 2 out).
- Mete Lojman: Carefully insert the housing through the ceiling opening. The integral flange will rest against the ceiling surface.
- Lojman an sekirite: The exclusive locking bars are designed to secure the housing in ceilings from 1/2-inch to 1-inch thick. As you push the housing into the opening, the locking bars will engage and clamp onto the ceiling material. For thicker ceilings, a small screwdriver or pick can be used to rotate the bar up during installation to ensure proper engagement.
- Install Trim (Sold Separately): Once the housing is securely in place, install the desired recessed lighting trim according to its specific instructions.
- Enstale Lamp: Insert a medium base lamp (bulb) into the socket within the housing.
- Retabli pouvwa: Yon fwa enstalasyon an fini epi tout koneksyon yo byen fèm, retabli kouran an nan disjonktè a.
Operasyon
The Progress Lighting P832-TG Remodel Recessed Lighting Housing operates as a fixture for a medium base lamp. Once properly installed and connected to a power source, the housing will provide illumination when a compatible lamp is inserted and the electrical circuit is activated via a wall switch or dimmer (not included).
Asire lamp used is compatible with the housing's specifications and your electrical system.
Antretyen
The P832-TG housing requires minimal maintenance. Regular cleaning and lamp replacement are the primary maintenance tasks.
- Netwayaj: Before cleaning, ensure power is disconnected at the circuit breaker. Wipe the exterior of the housing and any installed trim with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Lamp Ranplasman: Disconnect power before replacing a lamp. Allow the old lamp to cool completely before removal. Replace with a new medium base lamp of the appropriate wattage ak kalite.
- Enspeksyon: Periodically inspect the housing and wiring for any signs of damage or wear. If any issues are found, disconnect power and consult a qualified electrician.
Depanaj
If you encounter issues with your recessed lighting housing, refer to the following table for common problems and solutions.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. | Pa gen pouvwa nan aparèy la. Lamp li defektye oswa li lach. Erè fil elektrik. | Tcheke disjoncteurs/fuse. Ensure wall switch is ON. Ranplase lamp or tighten. Konsilte yon elektrisyen kalifye pou verifye fil elektrik yo. |
| Limyè flickers. | Lache lamp. Koneksyon fil elektrik ki lach. Entèriptè gradatè ki pa konpatib. | Sere boulon lamp. Dekonekte pouvwa epi tcheke koneksyon fil elektrik. Ensure dimmer is compatible with the lamp kalite. |
| Housing is not secure in ceiling. | Locking bars not fully engaged. Ceiling thickness outside specified range. | Ensure locking bars are fully engaged. Re-insert housing if necessary. Verify ceiling thickness is between 1/2-inch and 1-inch. |
Si pwoblèm nan pèsiste apre ou fin eseye solisyon sa yo, kontakte sèvis kliyan oswa yon elektrisyen kalifye.
Espesifikasyon
| Atribi | Valè |
|---|---|
| Nimewo Modèl | P832-TG |
| Mak | Pwogrè ekleraj |
| Materyèl | Steel galvanize |
| Fini Kalite | Fini |
| Koulè | Fini |
| Kalite sous limyè | Incandescent (compatible with LED retrofit bulbs) |
| Voltage | 120 Volts |
| Ouvèti plafon | 4-1/4 pous |
| Dimansyon (L x W x H) | 5"L x 6"W x 6"H (Product) / 11-3/8" Width x 5-1/2" Height (Housing) |
| Pwa atik | 1.57 liv |
| Metòd enstalasyon | Ankastre |
| Ceiling Thickness Compatibility | 1/2-inch to 1-inch thick |
| Lis UL/CUL | Yes, for damp locations and through wiring |
Enfòmasyon sou Garanti
The Progress Lighting P832-TG Remodel Recessed Lighting Housing comes with a 1-ane garanti limite soti nan dat acha a. Garanti sa a kouvri domaj nan materyèl ak atizan konn fè nan itilizasyon nòmal.
Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, misuse, abuse, or acts of nature. For full warranty terms and conditions, please refer to the documentation included with your product or contact Progress Lighting customer support.
Sipò pou Kliyan
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Progress Lighting customer support.
You can also visit the official Progress Lighting store on Amazon for more product information and resources: Progress Lighting Store
Please have your model number (P832-TG) and purchase information ready when contacting support.
