Manyèl Enstriksyon pou Limyè Pwojektè Elegant RAB Lighting LFP16A

1. Pwodwi souview

The RAB Lighting LFP16A Sleek Floodlight is designed for outdoor illumination, providing efficient and durable lighting. This fixture accommodates a PAR16 type bulb and features a robust die-cast aluminum housing with a powder-coated finish for enhanced durability and weather resistance.

Karakteristik kle:

• Designed for 60W PAR16 bulbs, delivering 650 lumens output (bulb not included).
• Durable die-cast aluminum housing with a powder-coated finish.
• Gasket and O-ring seals provide resistance against weather elements.
• Integrated shield helps reduce glare.
• Equipped with a 1/2" NPS threaded arm for secure mounting and a locking swivel for adjustable positioning.

Figure 1: RAB Lighting LFP16A Sleek Floodlight. This image shows the floodlight fixture with its threaded arm and wiring, highlighting its compact and durable design.

2. Enfòmasyon sou Sekirite

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• Sekirite elektrik: Always disconnect power at the circuit breaker or fuse box before wiring or servicing the fixture.
• Elektrisyen ki kalifye: Enstalasyon an dwe fèt pa yon elektrisyen kalifye, dapre tout kòd elektrik lokal ak nasyonal yo.
• Atè: Ensure the fixture is properly grounded to avoid potential electrical hazards.
• Kalite anpoul: Use only PAR16 type bulbs with a maximum wattage of 60W. Exceeding the maximum wattage can cause overheating and damage to the fixture.
• Kote mouye: This fixture is suitable for wet locations. Ensure all connections are properly sealed and waterproofed during installation.
• Tanperati: Do not install near combustible materials or surfaces that may be affected by heat.

3. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• RAB Lighting LFP16A Sleek Floodlight Fixture (1)
• Manyèl Enstriksyon (1)

Note: Light bulb and wire connectors are not included and must be purchased separately.

4. Enstalasyon ak Enstalasyon

This floodlight is designed for wall mounting and features a 1/2" NPS threaded arm for secure attachment to a junction box or mounting accessory. Follow these steps for proper installation:

1. Prepare pou enstalasyon:
   • Turn off power at the circuit breaker before starting any electrical work.
   • Gather necessary tools: screwdriver, wire strippers, electrical tape, silicone sealant (for waterproofing).
2. Monte aparèy la:
   • Thread the 1/2" NPS arm of the floodlight into a compatible outdoor junction box or mounting plate. Ensure a tight and secure connection.
   • Use the locking swivel to adjust the initial angle of the fixture.
   

   Figure 2: Detail of the 1/2" NPS threaded arm and 180-degree adjustable swivel. This illustrates the mounting mechanism and flexibility of the floodlight.
3. Koneksyon fil elektrik:
   • Connect the black wire from the fixture to the hot (black) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (white) wire from the power supply.
   • Connect the bare copper or green wire from the fixture to the ground wire from the power supply.
   • Secure all connections with appropriate wire connectors and electrical tape. For outdoor installations, consider using silicone-filled wire nuts for added moisture protection.
4. Enstale anpoul:
   • Carefully insert a PAR16 bulb (max 60W) into the fixture socket. Do not overtighten.
5. Sele epi Tès:
   • Ensure all connections are secure and the fixture is properly sealed against moisture. Apply silicone sealant around the mounting base if necessary.
   • Restore power at the circuit breaker and test the floodlight's operation.

5. Operasyon Enstriksyon

Once installed and powered, the RAB Lighting LFP16A Floodlight operates by the control of the circuit it is connected to (e.g., a wall switch, timer, or photocell). There are no direct controls on the fixture itself.

• Ajiste direksyon limyè: The fixture features a locking swivel arm. To adjust the light direction, loosen the locking nut on the swivel, position the floodlight as desired, and then tighten the locking nut securely.
• Rediksyon ekla: The built-in shield is designed to minimize glare, directing light effectively to the intended area.

Figi 3: Egzample of the LFP16A floodlight used in a landscape setting, demonstrating its illumination capabilities.

6. Antretyen

Regular maintenance ensures optimal performance and longevity of your floodlight.

• Netwayaj: Netwaye deyò aparèy la detanzantan avèk yon twal mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvan, paske sa yo ka domaje fini an. Asire w ke kouran an koupe anvan ou netwaye.
• Ranplasman anpoul:
  1. Koupe kouran aparèy la nan disjonktè a.
  2. Kite ansyen anpoul la refwadi nèt anvan ou manyen li.
  3. Carefully unscrew and remove the old PAR16 bulb.
  4. Insert a new PAR16 bulb (max 60W) into the socket, ensuring it is seated correctly.
  5. Retabli kouran an epi teste nouvo anpoul la.
• Enspeksyon: Annually inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly.

NAN. Depanaj

8. Espesifikasyon

9. Garanti ak sipò

The RAB Lighting LFP16A Sleek Floodlight comes with a Garanti manifakti 1 zan soti nan dat acha a. Garanti sa a kouvri domaj nan materyèl ak atizan konn fè nan itilizasyon nòmal.

For warranty claims, technical support, or further assistance, please contact RAB Lighting customer service. Refer to the official RAB Lighting websit la pou jwenn enfòmasyon kontak ki pi resan yo.

Manifakti: RAB ekleraj

Websit: www.rablighting.com (Egzamplyen an, lyen aktyèl la ka varye)