Entwodiksyon
Mèsi pou acha aasing the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Kontni pake
- Lexon On/Off 3 Position LCD Alarm Clock (LR98-B)
- Batri AAA x 2
- Manyèl Itilizatè (dokiman sa a)
Pwodwi souview
The Lexon LR98-B is a unique digital alarm clock designed for intuitive use. Its innovative "on/off" mechanism allows you to activate or deactivate the alarm simply by rotating the clock to one of its three positions. The clear LCD display shows the time, and an EL backlight provides visibility in low-light conditions.
This image displays the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B, in its black finish. The clock is shown in an angled position, with the digital display clearly visible, indicating '12:30 PM'. The unique 'on/off' design is evident in its angled structure, where rotating the clock changes its operational state.
Enstalasyon
1. Enstalasyon batri
- Jwenn kouvèti konpatiman pil la sou dèyè revèy la.
- Retire kouvèti a lè w fè yon ti mouvman oswa lè w fè yon ti leve pou louvri l.
- Mete de (2) pil AAA, asire w polarite ki kòrèk la (+ ak -) jan yo endike anndan konpatiman an.
- Ranplase kouvèti lòj batri a byen.
2. Premye Limen
Once batteries are installed, the LCD display should activate. If not, check battery placement or replace with fresh batteries.
Enstriksyon Operasyon
The Lexon LR98-B features a unique "on/off" function controlled by its physical orientation. The clock has buttons on the back for setting time and alarm.
Mete tan an
- Locate the time setting buttons on the back of the clock (usually labeled "SET" or "TIME" and "+" / "-").
- Peze epi kenbe bouton "SET" la oswa "TIME" la jiskaske chif lè yo kòmanse flache.
- Use the "+" and "-" buttons to adjust the hour. Pay attention to the AM/PM indicator if present.
- Press the "SET" or "TIME" button again to move to the minute setting.
- Sèvi ak bouton "+" ak "-" yo pou ajiste minit yo.
- Press "SET" or "TIME" one last time to confirm and exit time setting mode.
Mete Alam la
- Locate the alarm setting buttons on the back of the clock (usually labeled "ALARM" and "+" / "-").
- Peze epi kenbe bouton "ALARM" la jiskaske chif lè alam lan kòmanse flache.
- Use the "+" and "-" buttons to adjust the alarm hour.
- Press the "ALARM" button again to move to the alarm minute setting.
- Use the "+" and "-" buttons to adjust the alarm minutes.
- Press "ALARM" one last time to confirm and exit alarm setting mode.
Using the On/Off Function
The Lexon LR98-B features a unique physical on/off switch. The clock has three positions:
- Alarm ON Position: When the clock is oriented in a specific way (e.g., with "ON" facing upwards or a designated side), the alarm function is active. A small indicator (e.g., an alarm icon) may appear on the display.
- Alarm OFF Position: When the clock is rotated to another specific orientation (e.g., with "OFF" facing upwards or a different designated side), the alarm function is deactivated. The alarm indicator will disappear from the display.
- Time Display Position: A third position might exist for simply displaying the time without alarm functionality being explicitly on or off, or it might be a neutral position. Refer to the markings on your specific device.
To activate or deactivate the alarm, simply rotate the clock to the desired position. The display will visually confirm the alarm status.
EL ekleraj
To illuminate the display in dark conditions, press the "EL" button located on the back of the clock. The backlight will typically stay on for approximately 3 seconds.
Hourly Time Signal (Chime)
The clock is equipped with an hourly time signal function. To activate or deactivate this feature, refer to the specific button or combination of buttons on the back of your device, often labeled "CHIME" or integrated with the "SET" button. Consult the markings on your clock for precise control.
Antretyen
- Netwayaj: Siye revèy la ak yon twal mou epi sèk. Pa sèvi ak pwodui netwayaj abrazif oswa solvan, paske sa yo ka domaje fini an oswa ekran an.
- Ranplasman batri: Replace batteries when the display dims or the clock functions become erratic. Always replace both batteries simultaneously with new AAA batteries.
- Depo: Si w ap sere revèy la pou yon peryòd tan pwolonje, retire pil yo pou anpeche likid koule.
- Anviwònman: Avoid exposing the clock to extreme temperatures, direct sunlight, high humidity, or strong magnetic fields.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Ekran an vid oswa li fèb. | Pil ki fèb oswa ki mouri; move enstalasyon pil. | Replace batteries with new AAA batteries; ensure correct polarity. |
| Alam lan pa sonnen. | Alarm is not set; clock is in "OFF" position; alarm volume is too low (if adjustable). | Ensure alarm time is set correctly; rotate clock to "ON" position; check for volume controls if applicable. |
| Lè a pa kòrèk. | Time was not set correctly; power interruption (if not battery-backed). | Reyajiste lè a dapre enstriksyon "Mete lè a" yo. |
Espesifikasyon
- Modèl: LR98-B (Manufacturer Model Number: 2910200 LR98-B)
- Mak: Lexon
- Kalite ekspozisyon: Digital LCD
- Sous pouvwa: 2 x AAA pil
- Materyèl: ABS (akrylonitrile butadien stirèn)
- Dimansyon (W x P x H): 5.3 x 1.4 x 3.1 pous (13.5 x 3.5 x 8 cm)
- Pwa: 0.13 kg (4.6 ons)
- Karakteristik espesyal: On/Off 3 Position Function, EL Backlight, Hourly Siyal Tan
- Kalite montaj: Tabletop
- Peyi orijin: Lachin
Garanti ak sipò
Lexon products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official Lexon websit la. Tanpri konsève prèv acha ou a pou nenpòt reklamasyon garanti.
For further assistance, you may contact Lexon customer support through their official channels.
