Manyèl Enstriksyon pou Aparèy Chofaj Plafon Marley CDF557 la

1. Entwodiksyon

This manual provides essential instructions for the safe installation, operation, and maintenance of your Marley CDF557 Ceiling Mounted Downflow Heater. Please read this manual thoroughly before attempting to install or operate the unit. Retain this document for future reference.

The Marley CDF557 is designed to deliver efficient heating for commercial spaces such as offices, conference rooms, lobbies, waiting rooms, and entranceways.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Enstalasyon, ajisteman, chanjman, sèvis oswa antretyen move ka lakòz domaj nan pwopriyete, blesi oswa lanmò. Li enstriksyon enstalasyon, opere ak antretyen yo byen anvan ou enstale oswa fè sèvis pou ekipman sa a.

• Tout fil elektrik yo dwe fèt pa yon elektrisyen kalifye, dapre kòd elektrik nasyonal ak lokal yo.
• Ensure the power supply is disconnected before performing any installation, maintenance, or service.
• Do not operate the heater with damaged wiring or if the unit malfunctions.
• Kenbe yon distans apwopriye ak materyèl ki ka pran dife jan sa espesifye nan enstriksyon enstalasyon yo.
• This heater is intended for indoor use only.

3. Pake kontni

Verifye ke tout konpozan yo prezan epi yo pa domaje lè w ap debale yo:

• Marley CDF557 Ceiling Heater Unit
• Installation Hardware (including thumb pins)
• Manyèl Enstriksyon (dokiman sa a)

4. Enstalasyon ak Enstalasyon

Installation of the Marley CDF557 heater requires careful attention to electrical connections and mounting procedures. It is recommended that installation be performed by a licensed professional.

4.1 Montaj Opsyon

The CDF557 heater can be installed using either a surface or recessed enclosure, depending on your ceiling type and available installation space.

• Mounting andigman: When surface mounted, the unit extends approximately 6 inches into the room.
• Montaj Ankastre: For recessed installations, the enclosure requires approximately 7 inches of internal clearance within the ceiling.

The included thumb pins are designed to hold the unit together during installation, allowing for hands-free placement on the ceiling surface or within an enclosure.

4.2 Koneksyon elektrik

This unit operates at 277 Volts and has a power output of 5000 Watts. Ensure that the electrical supply circuit is appropriately sized and protected by a circuit breaker as per local electrical codes. All wiring must comply with national and local electrical codes and be performed by a qualified electrician.

4.3 Adjusting Heating Patterns

The CDF557 allows for adjustment of heating patterns to optimize heat distribution:

• Modèl etwat: Focuses heat on a specific area.
• Modèl lajè: Provides broader coverage for larger areas.
• Asymmetrical Patterns: Can be configured to direct heat output while still offering generous coverage to specific zones.

Refer to the detailed installation diagrams for specific instructions on adjusting the internal louvers or deflectors to achieve the desired heating pattern.

Figi 1: The Marley CDF557 Ceiling Heater, shown installed within a suspended ceiling grid. The unit features a central grille for air intake and multiple smaller grilles on the sides for heat distribution. Its neutral Sandal Wood color blends with typical ceiling tiles.

5. Operasyon Enstriksyon

Once properly installed and connected to power, the Marley CDF557 heater operates automatically based on its thermostat settings.

5.1 Operasyon debaz

1. Ensure the heater is connected to a live power supply.
2. Set the desired temperature on the external thermostat (if applicable, sold separately or integrated into a building management system).
3. The heater will activate when the room temperature falls below the set point.

5.2 Operasyon fanatik

The heater's fan is designed for optimal comfort and efficiency:

• The fan will only begin to blow air into the room once the heating elements have reached the desired operating temperature. This prevents the circulation of cold air.
• After the heating cycle concludes, the fan will continue to operate for a short period to discharge all residual heat from the unit before shutting off completely. This maximizes heat transfer and prolongs component life.

5.3 Building Management System Integration

Optional relays are available to connect the CDF557 ceiling heater to a central building management system (BMS). This allows for centralized control and monitoring of temperatures across multiple units from a single location. Consult a qualified HVAC technician for integration with a BMS.

6. Antretyen

Regular maintenance ensures the longevity and efficient operation of your Marley CDF557 heater. Always disconnect power before performing any maintenance.

• Netwayaj: Periodically clean the grilles and exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no dust or debris accumulates on the heating elements or fan blades.
• Enspeksyon: Annually inspect the unit for any signs of wear, damage, or loose connections. Pay attention to wiring and mounting hardware.
• Sèvis pwofesyonèl: For internal cleaning or electrical component inspection, it is recommended to contact a qualified service technician.

NAN. Depanaj

If your Marley CDF557 heater is not operating correctly, consult the following troubleshooting guide before contacting service personnel.

For problems not listed or if solutions do not resolve the issue, contact Marley customer support or a qualified service technician.

8. Espesifikasyon

9. Garanti ak sipò

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Marley website. For technical support, replacement parts, or service inquiries, please contact Marley customer service directly.

Anjeneral, ou ka jwenn enfòmasyon kontak sou fichye manifakti a. websit la oubyen sou anbalaj pwodwi a.