Pwodwi souview
The Fluke 115 Field Service True-RMS Technicians Multimeter is a compact and versatile instrument designed for a wide variety of electrical and electronic testing applications. It provides accurate True-RMS voltage and current readings, along with capabilities for testing resistance, continuity, frequency, and capacitance. Its robust design and clear display make it suitable for field technicians and professionals requiring reliable measurements.
Figi 1: Devan view of the Fluke 115 Digital Multimeter, showing the display, rotary dial, and input jacks.
Ki sa ki nan bwat la
- Fluke 115 Multimeter
- Holster
- 9V Battery (installed)
- 4mm Silicone Test Lead Set
- Manyèl itilizatè
Figure 2: Contents of the Fluke 115 package, including the multimeter, test leads, and user manual.
Enstalasyon
1. Enstalasyon pil (si li pa deja enstale)
The Fluke 115 typically comes with the 9V battery pre-installed. If replacement is needed, locate the battery access door on the back of the unit. Use a screwdriver to open the compartment, insert a new 9V battery, ensuring correct polarity, and secure the door.
2. Konekte fil tès yo
- Mete plon tès nwa a nan COM priz antre (komen).
- Insert the red test lead into the appropriate input jack based on the measurement type:
- Pou voltage (V), resistance (Ω), capacitance, and frequency (Hz) measurements, use the VΩHz jack antre.
- For current (A) measurements up to 10A, use the 10 A FUSED jack antre.
Figure 3: The Fluke 115 Multimeter being held, demonstrating its compact size and ease of handling for field use.
Enstriksyon Operasyon
The Fluke 115 features a large rotary dial for selecting measurement functions and buttons for additional features like HOLD, MIN/MAX, and RANGE.
Fonksyon Mezi
- AC / DC Voltage (V∼ / V—): Select the V∼ (AC) or V— (DC) position on the rotary dial. The meter measures True-RMS voltage jiska 600V.
- Rezistans (Ω): Select the Ω position. The meter will display resistance in Ohms.
- Kontinwite (♫): Select the continuity position. A simple beep indicates when a wire or fuse is functioning properly.
- Kapasite (⊥): Select the capacitance position. Measures capacitance values.
- Frekans (Hz): Select the Hz position. Measures the frequency of AC signals.
- AC/DC Current (A∼ / A—): Select the A∼ (AC) or A— (DC) position. Measures current up to 10A (20A momentary for 30 seconds).
- Tès dyod (→|—): Select the diode test position to check diode functionality.
Karakteristik espesyal
- Min/Max/Average: Peze a MINMAX button to record signal fluctuations over time. This feature captures the minimum, maximum, and average readings.
- Kenbe: Peze a KENBE button to freeze the current reading on the display.
- Range: The meter features auto-ranging. Press the NIVO button to manually select a measurement range if desired.
- Ekleraj: Press the backlight button (sun icon) to illuminate the display for work in poorly lit areas.
Figure 4: The Fluke 115 Multimeter being used to take measurements on an electrical panel, highlighting its practical application.
Antretyen
Batri ak Ranplasman Fuse
To replace the battery or fuses, refer to the detailed instructions in the full user manual. The meter's yellow protective holster can be removed to access the battery and fuse compartment on the back. Ensure the meter is turned off and test leads are disconnected before attempting any maintenance.
Figure 5: The Fluke 115 Multimeter positioned on a workbench, ready for use or maintenance.
Depanaj
Pwoblèm komen ak solisyon yo
- No Display or Faint Display: Check battery level and replace if necessary. Ensure the battery contacts are clean. If the display remains faint, refer to the full user manual for advanced troubleshooting steps, which may involve cleaning internal display connections.
- Lekti ki pa kòrèk: Verify that the test leads are properly connected to the correct input jacks for the selected measurement function. Ensure the rotary dial is set to the appropriate function. Check for damaged test leads or probes.
- Kontè a pa limen: Confirm the battery is correctly installed and has sufficient charge.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | Fluke |
| Nimewo Modèl | 115 |
| Dimansyon pwodwi | 10.83 x 16 x 3.94 pous; 1.32 liv |
| Pwa atik | 600 gram |
| Sous pouvwa | Battery Powered (2 AA batteries required, included) |
| Style | VRÈ RMS MULTIMÈTÈ |
| Koulè | Jòn |
| Rating sekirite | CAT III 600V |
| Voltage Mezi | AC / DC Voltage jiska 600 V |
| Aktyèl Mezi | Current up to 10 A (20 A momentary for 30 seconds) |
| Lòt Mezi | Resistance, Continuity, Frequency, Capacitance |
| Ekspozisyon | 6000 count resolution with large white LED backlight |
Enfòmasyon sou Garanti
Specific warranty details for the Fluke 115 Digital Multimeter are typically provided by the manufacturer, Fluke, at the time of purchase or within the official product documentation. Please refer to the warranty card included with your product or visit the official Fluke website for the most current and comprehensive warranty terms and conditions.
Note: The provided product information includes a legal disclaimer regarding returns: "Returns accepted on all unopened merchandise. 10% restocking fee applies." This pertains to return policy and not the product's operational warranty.
Sipò
For technical assistance, product inquiries, or service, please contact Fluke customer support directly. You can find contact information and additional resources on the official Fluke websit.
Vizite la Magazen Fluke sou Amazon pou plis pwodwi ak enfòmasyon.
Videyo pwodwi ofisyèl yo
No official product videos from the seller were found that meet the criteria for inclusion in this manual. Videos available are from "Influencer" creators and are not embedded here.
