Behringer MiniAmp AMP800 4-channel Headphone AmpManyèl itilizatè lifier

Entwodiksyon

The Behringer MiniAmp AMP800 is a versatile 4-channel headphone amplifier designed to provide high-quality audio distribution for multiple users. It allows up to eight sets of headphones to be connected simultaneously, offering individual control over volume and input source for each channel. This compact and lightweight device is ideal for studio monitoring, live sound applications, or any scenario requiring multiple headphone outputs with independent control.

Karakteristik kle

• Four independent stereo high-power ampseksyon lifier.
• Two stereo main inputs for flexible routing.
• Individual output level control for each channel.
• Balance control for each channel to mix between input sources.
• Parallel link output for cascading multiple AMP800 inite.
• High-quality components and rugged construction for durability.

Enstalasyon

Before connecting your Behringer MiniAmp AMP800, ensure all audio equipment is powered off to prevent potential damage. Refer to the diagrams below for proper connection procedures.

Figure 1: Front panel of the Behringer MiniAmp AMP800, illustrating the four headphone output channels, each with dedicated level and balance controls, and input A/B selection buttons. The main power button and clip indicators are also visible.

Figi 2: Side view of the Behringer MiniAmp AMP800, demonstrating its compact form factor and the non-slip rubber feet designed to prevent scratching surfaces and provide stability during use.

1. Koneksyon pouvwa: Connect the included power adapter to the 9V DC input on the rear panel of the AMP800. Plug the adapter into a suitable power outlet.
2. Antre odyo: Connect your audio source(s) to the INPUT A and/or INPUT B 1/4" TRS jacks on the rear panel. These inputs accept stereo signals. For mono signals, use a mono 1/4" TS cable.
3. Koneksyon ekoutè: Plug your headphones into the 1/4" TRS output jacks on the front panel. Each channel (CH 1-4) supports one set of headphones.
4. Cascading (Optional): To connect additional headphone amplifiers, use the PARALLEL LINK OUTPUT 1/4" TRS jacks on the rear panel to send the input signal to another amplifier.

Enstriksyon Operasyon

1. Pouvwa sou: Press the POWER button on the front panel to turn on the unit. The power indicator LED will illuminate.
2. Seleksyon Antre: For each headphone channel (CH 1-4), use the INPUT A/B button to select which stereo input (A or B) will be routed to that channel. The corresponding LED will light up (A or B).
3. Ajisteman Nivo Antre: Adjust the LEVEL knob for INPUT A and INPUT B on the front panel to set the overall input signal strength. Monitor the CLIP LEDs; if they illuminate frequently, reduce the input level to prevent distortion.
4. Headphone Level Adjustment: For each headphone channel, use the PHONES LEVEL knob to adjust the individual volume for the connected headphones.
5. Kontwòl balans: The BALANCE knob for each channel allows you to mix between the two input sources (A and B) if both are active. Turning the knob towards 'A' will favor input A, and towards 'B' will favor input B.

Antretyen

To ensure the longevity and optimal performance of your Behringer MiniAmp AMP800, follow these maintenance guidelines:

• Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye deyò aparèy la. Pa sèvi ak pwodui netwayaj likid oswa solvan, paske yo ka domaje fini an oswa konpozan entèn yo.
• Vantilasyon: Asire w ke gen ase vantilasyon toutotou aparèy la. Pa bloke okenn ouvèti vantilasyon.
• Depo: Lè w pa itilize l pou yon bon bout tan, sere l ampSere l nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Jesyon kab: Avoid excessive bending or crimping of cables. Use appropriate cable lengths to prevent strain on connectors.

Depanaj

If you encounter issues with your Behringer MiniAmp AMP800, gade etap depanaj komen sa yo:

• Pa gen pouvwa: Ensure the power adapter is securely connected to both the unit and a working power outlet. Verify the power button is pressed.
• Pa gen son: Check all audio cable connections. Ensure the input source is active and sending a signal. Verify the correct input (A or B) is selected for the headphone channel. Increase the PHONES LEVEL and INPUT LEVEL knobs.
• Son defòme: Reduce the INPUT LEVEL if the CLIP LED is frequently illuminating. Ensure the audio source signal is not overdriven. Check headphone impedance compatibility.
• Bri oswa ronfleman: Ensure all cables are properly shielded and connected. Try using different power outlets. Disconnect other electronic devices that might be causing interference.
• Yon chanèl pa fonksyone: Test with different headphones and cables. Verify the input selection and level for that specific channel.

Espesifikasyon

Ki sa ki nan bwat la

• Behringer MiniAmp AMP800 Stereo Headphone Amplifier
• Adaptè pouvwa
• Manyèl Itilizatè (dokiman sa a)

Garanti ak sipò

Pwodwi Behringer yo fèt epi fabrike selon pi wo estanda kalite. Pou enfòmasyon detaye sou garanti a ak sipò teknik, tanpri al gade paj ofisyèl Behringer la. websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe resi acha w la kòm prèv acha pou nenpòt reklamasyon garanti.

Pou plis asistans, vizite Magazen Behringer sou Amazon.