1. Entwodiksyon
This user manual provides comprehensive instructions for the Behringer Feedback Destroyer Pro FBQ2496, an ultra-high performance 2-channel 24-bit/96 kHz Feedback Destroyer and Parametric EQ. It is designed to automatically and intelligently locate and destroy feedback frequencies, ensuring optimal audio quality in live sound and studio environments.
Please read this manual thoroughly before operating the device to ensure proper setup, operation, and maintenance.
Figi 1: Panèl devan view of the Behringer Feedback Destroyer Pro FBQ2496, showing controls and displays.
2. Enstriksyon Sekirite Enpòtan
- Pwovizyon pou pouvwa: Use only the specified power supply. Ensure the voltage matches the device's requirements (100 - 240 V~).
- Vantilasyon: Do not block ventilation openings. Install according to manufacturer's instructions.
- Dlo ak imidite: Pa sèvi ak aparèy sa a toupre dlo epi pa ekspoze l a degoute oswa eklatman.
- Chalè: Pa enstale tou pre okenn sous chalè tankou radyatè, rejis chalè, recho, oswa lòt aparèy (tankou amplifiers) ki pwodui chalè.
- Sèvis: Refere tout sèvis yo bay pèsonèl sèvis kalifye. Reparasyon nesesè lè aparèy la domaje nenpòt fason, tankou kòd kouran oswa ploge domaje, likid koule oswa objè tonbe nan aparèy la, aparèy la te ekspoze a lapli oswa imidite, li pa fonksyone nòmalman. , oswa li te tonbe.
3. Enstalasyon
3.1 Debalaj ak enspeksyon
Carefully unpack the FBQ2496 and inspect it for any signs of damage during transit. If any damage is found, contact your dealer immediately.
3.2 Montaj etajè
The FBQ2496 is designed for standard 19-inch rack mounting. Ensure adequate ventilation around the unit when installing it in a rack.
3.3 Koneksyon
The FBQ2496 features balanced inputs and servo-balanced outputs with 1/4'' TRS and gold-plated XLR connectors. Connect your audio source (e.g., mixer output) to the inputs and your amplifier or next processing unit to the outputs.
- Entran Audio: Sèvi ak kab XLR balanse oswa 1/4" TRS pou yon siyal ki pi byen kenbe.
- Rezilta Audio: Konekte ak pouvwa ou amplifier or next device in the signal chain using balanced XLR or 1/4" TRS cables.
- Koneksyon MIDI: The unit supports extensive MIDI implementation for remote control and firmware updates. Connect MIDI IN/OUT to your MIDI interface or controller.
- Koneksyon pouvwa: Connect the supplied power cord to the AC inlet on the rear panel and to a suitable power outlet. The internal switch-mode power supply supports 100 - 240 V~.
4. Operasyon Enstriksyon
4.1 Front Panel Overview
Figi 2: Detaye view of the FBQ2496 front panel controls.
- Meter nivo: Displays input/output signal levels for both channels. The CLIP indicator illuminates when the signal is too high.
- APRANN bouton: Activates the automatic feedback detection and suppression process.
- Bouton panik: Immediately engages maximum feedback suppression in emergency situations.
- Channel Displays (1/L & 2/R): Show the active filters for each channel. Up to 20 filters per channel can be set.
- Ekspozisyon dijital: Shows parameter values, menu options, and filter numbers.
- Parametric EQ Controls (GAIN, FREQUENCY, BANDWIDTH, PEQ): Used for manual adjustment of parametric filters.
- Rotary Encoder: Navigates menus and adjusts parameter values.
- POUVWA bouton: Vire inite a sou / sou.
4.2 Mòd Fonksyònman
The FBQ2496 offers several operating modes to suit different applications:
- Mòd oto: Continuously monitors the mix and automatically sets filters to suppress feedback. This is the "set-and-forget" default setting.
- Single-Shot Mode: Automatically detects and destroys feedback, then locks the filters until they are manually reset. This is useful for ringing out a room before a performance.
- Manual Mode (Parametric EQ): Allows individual programming of up to 40 fully-parametric filters with adjustable frequency, bandwidth, and gain. This mode is ideal for precise sound shaping.
4.3 Basic Feedback Suppression (Auto Mode)
- Ensure all connections are secure and the unit is powered on.
- Set your mixer's output levels to a moderate level.
- Peze a APRANN button to activate Auto Mode. The unit will begin analyzing the audio signal.
- Gradually increase the microphone gain until feedback starts to occur. The FBQ2496 will quickly identify and suppress the feedback frequencies.
- The unit will automatically set ultra-narrow FBQ filters to eliminate the feedback while preserving the sonic quality of your signal.
- For immediate feedback emergencies, press the PANIK bouton.
5. Antretyen
The Behringer FBQ2496 requires minimal maintenance. Follow these guidelines to ensure its longevity:
- Netwayaj: Netwaye aparèy la avèk yon twal mou epi sèk. Pa sèvi ak pwodui netwayaj likid oswa ayewosòl.
- Vantilasyon: Ensure that the ventilation slots are free from dust and obstructions.
- Depo: Si w ap sere aparèy la pou yon bon bout tan, dekonekte l nan kouran an epi sere l nan yon kote ki fre epi sèk.
- Mizajou mikrolojisyèl: Check the official Behringer website periodically for any available firmware updates. Updates can typically be performed via the MIDI interface.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen pouvwa | Power cable disconnected; faulty power outlet. | Tcheke koneksyon kab kouran an; eseye yon lòt priz kouran. |
| Pa gen pwodiksyon odyo | Incorrect cable connections; unit in Bypass mode; input signal too low. | Verify all audio cable connections; ensure unit is not in Bypass mode; increase input signal level. |
| Feedback not suppressed | LEARN mode not active; filters are full; extreme acoustic conditions. | Activate LEARN mode; reset filters if necessary; adjust microphone placement or gain. |
| Odyo defòme | Input signal too high (clipping); faulty cables. | Reduce input signal level (check CLIP indicator); replace cables. |
7. Espesifikasyon teknik
- Modèl: FBQ2496
- Kalite: 2-channel Feedback Destroyer / Parametric EQ
- Samppousantaj ling: 96 kHz
- A/D & D/A Conversion: 24-bit / 96 kHz
- DSP: 32-bit
- Feedback Filters: Up to 40 FBQ filters (20 per channel)
- Kalite filtre: Ultra-narrow notch filters (up to 1/60th of an octave)
- Konektè: Balanced 1/4'' TRS and gold-plated XLR inputs/outputs, MIDI In/Out/Thru
- Pwovizyon pou pouvwa: Internal switch-mode power supply (100 - 240 V~)
- Dimansyon (H x W x P): 1.75" x 19.02" x 8.54" (44.5 mm x 483 mm x 217 mm)
- Pwa: 5.86 liv (2.66 kg)
- Koulè: Ajan
- Materyèl: Metal plastik
8. Garanti ak sipò
8.1 Enfòmasyon sou Garanti
Behringer products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Behringer websit.
8.2 Sipò teknik
For technical assistance, product registration, or to download the latest drivers and firmware, please visit the Behringer support page on their official websit la. Ou ka jwenn tou FAQ ak enfòmasyon pou kontakte sèvis kliyan la.
Resous sou entènèt:
- Behringer ofisyèl la Websit: www.behringer.com
- Product Support Page: Refer to the Behringer website for specific product support.
