OSRAM Sylvania 54507 HP600 Projector Light Bulb User Manual

Pwodwi souview

This manual provides essential information for the safe and effective use of the OSRAM Sylvania 54507 HP600 Projector Light Bulb. This bulb is a 575-watt, 115-volt halogen lamp featuring a G9.5 Medium Bipin base and a T6 shape. It has a rated life of 300 hours, a color temperature of 3250K, and a C-13D filament with a clear finish.

Image: The OSRAM Sylvania 54507 HP600 Projector Light Bulb, showcasing its T6 shape and G9.5 base.

Enstriksyon Enstalasyon

Proper installation is crucial for the performance and longevity of your projector bulb. Always ensure the projector is powered off and unplugged before beginning installation.

1. Sekirite Premye: Turn off the projector and unplug it from the power source. Allow the projector and the old bulb to cool down completely before handling. Hot bulbs can cause severe burns.
2. Locate Bulb Compartment: Refer to your projector's specific user manual to locate and open the lamp compartment. This usually involves removing a cover secured by screws.
3. Retire ansyen anpoul: Carefully disconnect any wiring and unfasten the old bulb assembly. Handle the old bulb with care, as it may be fragile.
4. Enstale nouvo anpoul: Gently insert the new OSRAM Sylvania 54507 HP600 bulb into the projector's lamp lojman. Avoid touching the glass portion of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature bulb failure. Use a clean cloth or gloves if necessary. Ensure the G9.5 bipin base pins align correctly with the socket.
5. Secure Bulb and Compartment: Fasten the bulb assembly securely and close the lamp compartment cover. Ensure all screws are tightened to prevent dust ingress and ensure proper cooling.
6. Pouvwa sou: Plug the projector back into the power source and turn it on. The new bulb should illuminate.

Image: Diagram illustrating the dimensions of the G9.5 bipin base, showing pin spacing and overall base measurements for compatibility reference.

Enstriksyon Operasyon

Once installed, the OSRAM Sylvania 54507 HP600 bulb operates as part of your projector system. Follow these general guidelines for optimal performance:

• Sik pouvwa: Turn on the projector using its power button. Allow the bulb to warm up to full brightness, which may take a few moments.
• Peryòd refwadisman: After use, turn off the projector and allow it to complete its internal cool-down cycle before unplugging or moving it. This protects the bulb from thermal shock and extends its lifespan.
• Avoid Frequent On/Off: Minimize turning the projector on and off rapidly, as this can reduce the bulb's rated life.

Antretyen

Regular maintenance of your projector system helps ensure the longevity and performance of the OSRAM Sylvania 54507 HP600 bulb.

• Projector Filter Cleaning: Periodically clean or replace your projector's air filters as recommended by the projector manufacturer. Clogged filters can lead to overheating, which significantly shortens bulb life.
• Ranplasman anpoul: The OSRAM Sylvania 54507 HP600 has a rated life of 300 hours. Monitor your projector's lamp hour counter and replace the bulb when it approaches its end-of-life or when brightness noticeably diminishes.
• Depo: If storing a spare bulb, keep it in its original packaging in a cool, dry place away from direct sunlight and extreme temperatures.

Depanaj

If you encounter issues with your projector bulb, consider the following common problems and solutions:

• Anpoul pa limen:
  • Tcheke pouvwa: Ensure the projector is properly plugged in and receiving power.
  • Re-enstalasyon: Power off and unplug the projector. Re-open the lamp compartment and ensure the bulb is seated correctly and all connections are secure.
  • Fen lavi: If the bulb has reached or exceeded its rated life (300 hours), it may have failed. Replace with a new bulb.
  • Projector Error: Consult your projector's manual for specific error codes related to lamp echèk.
• Limyè Dim oswa Flickering:
  • Bulb Nearing End of Life: Dimness or flickering often indicates the bulb is nearing the end of its operational lifespan.
  • Surchof: Ensure projector vents are clear and filters are clean to prevent overheating.

Si etap sa yo pa rezoud pwoblèm nan, kontakte sèvis kliyan oswa yon teknisyen kalifye.

Espesifikasyon pwodwi

Key technical specifications for the OSRAM Sylvania 54507 HP600 Projector Light Bulb:

Enfòmasyon sou Garanti

Specific warranty terms for the OSRAM Sylvania 54507 HP600 Projector Light Bulb are typically provided by the manufacturer, OSRAM, or the authorized seller at the time of purchase. Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the documentation included with your purchase or visit the official OSRAM websit.

Sipò pou Kliyan

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact OSRAM customer support or the retailer from whom you purchased the bulb.

• OSRAM Store: Ou ka jwenn plis enfòmasyon ak enfòmasyon pou kontakte yo sou sit ofisyèl la. OSRAM Store on Amazon.
• Sipò pou Vandè: Contact the seller directly for purchase-specific support.