Memorex Label Maker Expert Kit Instruction Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the Memorex Label Maker Expert Kit, Model 32023947. This kit is designed to assist users in creating professional-looking labels for CDs, DVDs, and their corresponding jewel and DVD cases. It includes essential components for designing, printing, and applying custom labels.

Twous la gen ladann:

• ExPressit Software: Version 4.3 for label design.
• Label Applicator: A tool for precise label placement on discs.
• Etikèt: A starter pack of 138 labels, including disc labels, ring labels, jewel case spine labels, multiple-use labels, and DVD case inserts.

A compatible inkjet or laser printer (not included) is required to print the designed labels.

2. Enstalasyon

2.1 Enstalasyon lojisyèl

1. Insert the ExPressit Software CD (Version 4.3) into your computer's CD/DVD drive.
2. Follow the on-screen prompts to install the software. Ensure your operating system meets the minimum requirements for ExPressit Version 4.3.
3. Once installation is complete, restart your computer if prompted.

2.2 Printer Preparation

Ensure your printer is properly connected to your computer and has sufficient ink/toner. The Memorex labels are compatible with most standard inkjet and laser printers. Refer to your printer's manual for specific loading instructions for label sheets.

3. Operasyon Enstriksyon

3.1 Designing Labels with ExPressit Software

1. Launch the ExPressit software from your desktop or Start menu.
2. Select the desired label type (e.g., CD label, DVD label, jewel case insert, DVD case insert) from the software's interface.
3. Use the software's tools to add text, images, and graphics to your label design. The software supports various text layout effects.
4. Save your design frequently to prevent data loss.

3.2 Enprime Etikèt

1. Before printing your final labels, perform a calibration test. The ExPressit software includes a calibration utility.
2. Print a test page on a plain sheet of paper or the backside of a label sheet. The test page will typically have a grid or markings to help you determine print alignment.
3. Adjust the calibration settings in the software based on the test print results until the alignment is accurate.
4. Load the Memorex label sheets into your printer according to your printer's instructions, ensuring the correct side is facing up for printing.
5. Print your designed labels.

3.3 Applying Labels with the Applicator

1. Carefully peel the printed label from its backing sheet.
2. Place the label onto the Memorex Label Applicator, ensuring it is centered.
3. Position the disc (CD or DVD) onto the applicator's spindle.
4. Lower the applicator arm to gently press the label onto the disc. Apply even pressure to avoid air bubbles and ensure a smooth, centered application.
5. Remove the labeled disc from the applicator.

4. Antretyen

• Lojisyèl: Periodically check the Memorex website (if available) for any software updates or patches for ExPressit Version 4.3.
• Label Applicator: Keep the applicator clean and free of dust or adhesive residue. Wipe with a soft, dry cloth.
• Etikèt: Store unused label sheets in their original packaging in a cool, dry place to prevent curling or damage.

NAN. Depanaj

• Printing Misalignment:

  If labels are not printing correctly or are misaligned, re-run the calibration process within the ExPressit software. Ensure the correct label sheet type is selected in both the software and your printer settings. Verify that label sheets are loaded correctly into the printer tray.
• Pwoblèm lojisyèl:

  If the ExPressit software crashes or behaves unexpectedly, try reinstalling it. Ensure your computer's operating system is updated and meets the software's minimum requirements. Consult the software's built-in help documentation for specific error messages.

• Labels Not Sticking or Bubbling:

  Ensure the disc surface is clean and dry before application. Use the label applicator as instructed, applying even pressure to prevent air bubbles. If labels are old or stored improperly, their adhesive quality may degrade.

• Applicator Malfunction:

  Check the applicator for any obstructions or damage. Ensure the disc and label are correctly seated before lowering the arm. Do not force the applicator.

6. Espesifikasyon

Note: Specifications related to "Maximum Black and White Print Resolution", "Dual-sided printing", "Hardware Interface", "Connectivity Technology", and "Printing Technology" refer to the capabilities of a compatible printer, which is not included in this kit. This kit provides the software, labels, and applicator for use with your existing printer.

7. Garanti ak sipò

For warranty information and technical support regarding your Memorex Label Maker Expert Kit, please refer to the documentation included with your purchase or visit the official Memorex support website. Support availability may vary based on product age and region.