BELL Hubbell 5333-0 Weatherproof Box Instruction Manual

1. Entwodiksyon

The BELL Hubbell 5333-0 Weatherproof Box is a durable, two-gang electrical enclosure designed for branch circuit wiring in wet, damp, or dry locations. Constructed from seamless die-cast aluminum with a state-of-the-art powder-coated finish, it provides protection for receptacles, switches, and GFCIs. This box features three 1/2-inch threaded hubs, ground screw mounting, and a 31.0 cubic inch capacity. It is NEMA 3R rated and includes two closure plugs, installation hardware, and a gasket.

This manual provides essential information for the safe and correct installation, operation, and maintenance of your weatherproof box.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Risk pou chòk elektrik. Enstalasyon an dwe fèt pa yon elektrisyen kalifye, dapre tout kòd elektrik nasyonal ak lokal yo.

• Always disconnect power at the circuit breaker or fuse box before installing, servicing, or removing this product.
• Asire ke tout koneksyon fil elektrik yo an sekirite epi byen izole.
• Use only approved electrical components and wiring suitable for the intended application and environment.
• Pa depase vol maksimòm lantage or current ratings of the box or any installed devices.
• Ensure proper grounding of the electrical system. The box includes a ground screw for this purpose.
• For rain tightness, closure plugs are to be sealed with a silicone sealing compound.

3. Pake kontni

Verifye ke tout bagay yo prezan anvan ou kòmanse enstalasyon an:

• 1x BELL Hubbell 5333-0 Weatherproof Box
• 2x 1/2 inch Closure Plugs
• Materyèl enstalasyon (vis, elatriye)
• Joint
• Ground Screw (pre-installed)

4. Enstriksyon Enstalasyon

This weatherproof box is designed for surface mounting and can be used with various electrical devices such as receptacles, switches, and GFCIs. Follow these general steps for installation:

Figi 1: Prensipal view of the BELL Hubbell 5333-0 Weatherproof Box.

1. Preparasyon: Ensure power is disconnected at the main circuit breaker. Gather all necessary tools and materials, including appropriate conduit, wiring, and sealing compounds.
2. Kote montaj: Select a suitable mounting surface. The box features eight mounting options with detachable lugs for flexible installation.
3. Montaj sekirite: Mount the box securely to the surface using appropriate fasteners through the designated mounting holes. Ensure the box is level and stable.
4. Koneksyon konduit: Connect conduit to the 1/2-inch threaded hubs. Ensure all connections are tight and weatherproof. Internal hub threads comply with NEMA requirements.
5. Fil elektrik: Route electrical wires into the box through the conduit. Make all necessary electrical connections to the devices (receptacles, switches, etc.) that will be housed within the box.
6. Atè: Connect the equipment grounding conductor to the pre-installed ground screw inside the box.
7. Sealing Unused Hubs: Use the provided 1/2-inch closure plugs for any unused hubs. For optimal rain tightness, apply a silicone sealing compound around the plugs as indicated on the box.
8. Enstalasyon aparèy: Install the electrical devices (e.g., GFCI receptacle) into the box and secure them.
9. Enstalasyon kouvèti: Attach the appropriate weatherproof cover (sold separately) to the box, ensuring a tight seal with the included gasket.
10. Tcheke final la: Double-check all connections and ensure the box and cover are properly sealed. Restore power and test the installed devices.

Figi 2: Enteryè view highlighting ground screws and markings for wet locations.

5. Operasyon

The BELL Hubbell 5333-0 Weatherproof Box functions as a protective enclosure for electrical wiring and devices. Once properly installed with a suitable cover, it safeguards internal electrical components from environmental elements such as rain, moisture, and dust, ensuring reliable operation of the housed electrical devices in outdoor or damp kondisyon yo.

6. Antretyen

Minimal maintenance is required for the weatherproof box itself. Periodically inspect the box and its cover for any signs of damage, corrosion, or compromised seals. Ensure all conduit connections remain tight. Clean the exterior with a damp cloth as needed. Do not use abrasive cleaners or solvents that could damage the powder-coated finish.

If any damage is observed, disconnect power immediately and replace the affected components to maintain the weatherproof integrity and safety of the electrical system.

NAN. Depanaj

As a passive enclosure, the weatherproof box itself typically does not malfunction. Most issues related to an outdoor electrical installation would stem from improper wiring, damaged components, or compromised seals.

• Antre dlo: If water is found inside the box, immediately disconnect power. Inspect all seals, gaskets, closure plugs, and conduit connections. Reapply silicone sealant where necessary, and replace any damaged components or covers.
• Pèt pouvwa: If devices within the box lose power, check the circuit breaker. Inspect wiring connections for looseness or corrosion. This is typically an issue with the electrical circuit or device, not the box itself.
• Kowozyon: While the powder-coated aluminum is designed for durability, extreme conditions or damage can lead to corrosion. If significant corrosion is present, the box may need replacement to ensure long-term safety and integrity.

Always ensure power is off before performing any inspection or repair work.

8. Espesifikasyon teknik

Figure 3: Dimensions of the BELL Hubbell 5333-0 Weatherproof Box.

9. Garanti ak sipò

For information regarding product warranty, technical support, or replacement parts, please contact BELL customer service. Refer to the official BELL websit la oswa anbalaj pwodwi a pou jwenn enfòmasyon kontak ki pi resan yo.

Please have your model number (5333-0) and purchase date available when contacting support.