1. Entwodiksyon
Thank you for choosing the ECCO 6220A Medium Profile Strobe Light. This manual provides essential information for the safe and effective installation, operation, and maintenance of your strobe light. The 6220A is designed for industrial applications, operating within a 12-80 VDC range and featuring robust protection against electrical anomalies. Its design allows for easy flash tube replacement and secure mounting.
2. Enfòmasyon sou Sekirite
Enstriksyon enpòtan pou sekirite:
- Always disconnect power before installation, maintenance, or servicing.
- Asire ke ekipman pou pouvwa a matche ak vol la espesifyetage ranje (12-80 VDC).
- This product is tested in accordance with UL583 safety standard. Adhere to all local and national electrical codes.
- The unit is protected against reverse polarity, voltage spikes, and surges, but proper wiring is crucial for optimal performance and safety.
- Do not look directly into the strobe light when it is operating, as it can cause eye strain or temporary vision impairment.
3. Pake kontni
The ECCO 6220A Medium Profile Strobe Light package typically includes:
- ECCO 6220A Strobe Light Unit (Main component only)
Note: Additional mounting hardware or wiring may be required and sold separately.
4. Enstalasyon ak Enstalasyon
4.1 Montaj
The 6220A strobe light utilizes a two-hole flange mount, also referred to as a bracket mount. Ensure the mounting surface is stable and capable of supporting the unit's weight. Use appropriate fasteners (not included) for a secure installation.
Figure 1: ECCO 6220A Medium Profile Strobe Light. This image shows the amber-colored strobe light with its black two-hole flange base, ready for mounting.
4.2 Koneksyon elektrik
- Verify the power source is within the 12-80 VDC range.
- Connect the positive (+) wire from the power source to the positive terminal of the strobe light.
- Connect the negative (-) wire from the power source to the negative terminal of the strobe light.
- Ensure all connections are secure and insulated to prevent short circuits. The epoxy-filled base provides power-supply protection, and the unit is protected against reverse polarity, voltage spikes, and surges.
This strobe light is suitable for use in Type E, ES, and EE industrial trucks.
5. Operasyon
Once properly installed and connected to a 12-80 VDC power source, the ECCO 6220A strobe light will begin to flash automatically. No user intervention is typically required for basic operation. Ensure the light is positioned to provide maximum visibility for its intended warning purpose.
6. Antretyen
6.1 Netwayaj
Periodically clean the lens with a soft, damp cloth to ensure optimal light output. Avoid abrasive cleaners that could scratch the lens.
6.2 Flash Tube Replacement
The thread-on lens design allows for easy replacement of the flash tube without the need for specialized tools. To replace the flash tube:
- Dekonekte pouvwa a nan inite a.
- Carefully unscrew the lens counter-clockwise until it detaches from the base.
- Remove the old flash tube.
- Insert the new flash tube, ensuring it is seated correctly.
- Screw the lens back onto the base clockwise until secure. Do not overtighten.
- Reconnect power and test the unit.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Strobe light does not flash. | Pa gen pouvwa oswa fil elektrik kòrèk. Faulty flash tube. | Tcheke koneksyon kouran yo epi asire w ke vòltaj la kòrèk.tage (12-80 VDC). Replace flash tube (refer to Section 6.2). |
| Limyè ki soti a fèb oswa li pa konsistan. | Lantiy sal. Tib flash ki ap vyeyi. | Clean the lens (refer to Section 6.1). Replace flash tube (refer to Section 6.2). |
8. Espesifikasyon
| Nimewo Modèl | 6220A |
| Mak | ECCO |
| Voltage | 12-80 VDC |
| Sous pouvwa | DC adaptè |
| Kalite sous limyè | Strobe |
| Kalite aliye | Two-hole flange mount (bracket mount) |
| Dimansyon pwodwi (L x W x H) | 5.5" x 3.81" x 2.81" |
| Materyèl | Plastic (lens), Metal (internal components), Epoxy-filled base |
| Pwa atik | Apeprè 408 gram (14.4 ons) |
| Estanda sekirite | UL583 konfòme |
| UPC | 758379005392 |
9. Garanti ak sipò
9.1 Pwodwi Garanti
The ECCO 6220A Medium Profile Strobe Light comes with a senk ane garanti on the main unit. The flash tube component is covered by a separate sis mwa garanti. Garanti sa a kouvri domaj nan materyèl ak atizan konn fè nan itilizasyon nòmal.
9.2 Sipò pou Kliyan
For technical assistance, warranty claims, or replacement parts, please contact ECCO customer support. Refer to the ECCO official websit la pou jwenn enfòmasyon kontak ki pi resan yo.
