MXR Bass D.I.+ Instruction Manual

Entwodiksyon

The MXR M80 Bass D.I.+ is a robust and versatile preamp pedal engineered to provide bass players with a wide array of tonal possibilities for both live performances and studio recording. It features independent clean and distortion channels, a 3-band EQ, a noise gate, and multiple output options, making it an essential tool for any bassist.

Enstalasyon

Before connecting the MXR Bass D.I.+, ensure all audio equipment is turned off to prevent damage. The pedal can be powered by a 9V battery or an external 9V DC power supply (not included).

Alimente inite a

• Batri: Open the battery compartment on the bottom of the pedal and connect a 9V battery.
• Pwovizyon pou pouvwa: Connect a 9V DC power adapter (center negative) to the POWER jack on the side of the pedal.
• Phantom pouvwa: The unit can also be powered via phantom power from a mixing console through the DIRECT OUTPUT (XLR) connection. Ensure the PHANTOM/GROUND switch is set appropriately.

Koneksyon

• ENTRÈ: Connect your bass guitar to this 1/4-inch jack.
• SORTIF: Connect this 1/4-inch jack to your bass ampopinyon moun ki ap viv la.
• DIRECT OUTPUT (XLR): Connect this XLR output to a mixing console or recording interface for a balanced, direct signal.
• PARALLEL OUTPUT: This 1/4-inch jack provides an unprocessed, buffered signal from your bass, useful for connecting to a tuner or a second amplifier.

Kontwòl Fonksyònman

The MXR Bass D.I.+ features a comprehensive set of controls to shape your bass tone. Refer to Figure 3 for the layout of the controls.

Clean Channel Controls

• PWÒP VOLIM: Adjusts the overall output level of the clean channel.
• KOULÈ: Engages a preset EQ contour for a modern, scooped sound. This button illuminates when active.

Distortion Channel Controls

• VOLIM: Controls the output level of the distortion channel.
• MELANJ: Mixes the distorted signal with the clean signal. Turn clockwise for more distortion, counter-clockwise for more clean tone.
• DEklanche: Sets the threshold for the built-in noise gate. Higher settings require a stronger input signal to open the gate.
• GAY: Adjusts the amount of distortion applied to the signal.

Seksyon EQ

• BASS: Ajiste repons ba-frekans lan.
• MID: Ajiste repons frekans mitan an.
• TREBLE: Ajiste repons frekans segondè a.

Switches and Footswitches

• PHANTOM/GROUND: This switch controls the ground lift for the XLR output and enables phantom power operation. Set to 'Ground' to lift the ground and eliminate hum.
• GATE: Activates or deactivates the noise gate. The LED illuminates when the gate is active.
• Chanjman pou pye EFÈ: Toggles the entire effect (clean channel with EQ) on/off. The red LED indicates the effect is active.
• DISTORTION Footswitch: Engages or disengages the distortion channel. The red LED indicates distortion is active.

Antretyen

To ensure the longevity and optimal performance of your MXR Bass D.I.+, follow these maintenance guidelines:

• Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye deyò pedal la. Evite pwodui netwayaj abrazif oswa solvan.
• Depo: Sere pedal la nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Ranplasman batri: If using battery power, replace the 9V battery when the pedal's performance degrades or the indicator LEDs dim. Disconnect the input cable when not in use to conserve battery life.
• Koneksyon: Periodically check all cables and connections for wear and tear. Ensure jacks are free of dust and debris.

Depanaj

If you encounter issues with your MXR Bass D.I.+, refer to the following common problems and solutions:

• Pa gen son:
  • Tcheke tout koneksyon kab yo (antre, sòti, pouvwa).
  • Ensure the pedal is receiving power (check battery or power supply).
  • Verify that the EFFECT footswitch is engaged (red LED on).
  • Check the volume knobs on the pedal and your amplifier.
• Hum or Buzz:
  • Try engaging the PHANTOM/GROUND switch to lift the ground.
  • Ensure all power supplies are properly grounded and not interfering with other electronics.
  • Tcheke pou kab ki defektye.
• Distortion Not Engaging:
  • Ensure the DISTORTION footswitch is engaged (red LED on).
  • Adjust the GAIN knob to a higher setting.
• Signal Cutting Out (Noise Gate):
  • If the GATE is active, lower the TRIGGER knob setting.
  • If the GATE is not desired, disengage the GATE switch.

Espesifikasyon

Garanti ak sipò

For detailed warranty information and technical support, please refer to the official MXR or Dunlop Manufacturing websit la. Kenbe prèv acha ou a pou nenpòt reklamasyon garanti.

Resous sou entènèt:

• MXR ofisyèl Websit: www.jimdunlop.com/mxr/
• Dunlop Manufacturing Support: www.jimdunlop.com/support/