Entwodiksyon
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Honeywell Home D534WE Wired Illuminated Bell Push. Please read these instructions carefully before installation and retain them for future reference.
The D534WE is a wired bell push designed to activate a doorbell chime unit. It features an integrated light for enhanced visibility, operating via a voltage drop across the lamp when connected to a low-voltage doorbell circuit.
Enfòmasyon sou Sekirite
- Always disconnect power to the doorbell circuit at the main fuse box or circuit breaker before beginning any installation or maintenance.
- Si ou pa sèten sou fil elektrik yo, se yon elektrisyen kalifye ki ta dwe fè enstalasyon an.
- Asire w tout koneksyon fil yo byen fèm epi izole pou anpeche kous kout.
- This product is designed for low-voltage AC doorbell systems. Verify your existing system's voltage konpatibilite.
- Do not expose the unit to excessive moisture or extreme temperatures.
Kontni pake
Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:
- 1 x Honeywell Home D534WE Wired Illuminated Bell Push
- Mounting screws (typically included, but may vary)
Enstalasyon ak Enstalasyon
Follow these steps to install your bell push:
- Dekoneksyon pouvwa: Before starting, turn off the power to your doorbell circuit at the main electrical panel to prevent electrical shock.
- Remove Old Bell Push: Carefully remove your existing bell push, if any. Disconnect the two low-voltage wires connected to it.
- Prepare fil elektrik yo: Ensure the two low-voltage wires are accessible and have approximately 1/2 inch (1.2 cm) of insulation stripped from their ends.
- Konekte fil yo: Connect one wire to each terminal on the back of the D534WE bell push. The polarity typically does not matter for standard doorbell systems. Secure the wires firmly under the terminal screws.
- Montaj: Position the bell push at the desired location, typically beside the door frame. Use the provided mounting screws to secure the unit to the wall. Ensure the wires are not pinched during mounting.
- Retablisman pouvwa: Once the bell push is securely mounted and wired, restore power to the doorbell circuit at your main electrical panel.
- Fonksyonalite tès: Press the bell push to confirm that your doorbell chime rings. The integrated light should illuminate when the button is not pressed and extinguish when pressed, indicating proper operation via voltage gout.
This image illustrates the physical dimensions of the bell push, which are 60mm in height, 26mm in width, and 24mm in depth, aiding in proper installation planning.
Enstriksyon Operasyon
The Honeywell Home D534WE bell push is simple to operate:
- To activate your doorbell chime, press the illuminated button firmly.
- The integrated light will turn off while the button is pressed and re-illuminate when released, confirming activation.
Antretyen
The D534WE bell push requires minimal maintenance:
- Netwayaj: Siye sifas la ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvan, paske sa yo ka domaje fini an.
- Enspeksyon: Periodically check the unit for any signs of damage or loose connections.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Bell push light does not illuminate. |
|
|
| Doorbell chime does not ring when button is pressed. |
|
|
Espesifikasyon
- Nimewo Modèl: D534WE
- Mak: Honeywell Kay
- Kalite: Wired Illuminated Bell Push
- Sous pouvwa: AC (Low Voltage)
- Kalite anpoul: Dyòd emisyon limyè (LED)
- Koulè: Blan
- Fini: Blan
- Fòm: Round (button)
- Kalite montaj: Mi mòn
- Dimansyon pwodwi: 60mm (wotè) x 26mm (lajè) x 24mm (pwofondè)
- Pwa atik: 54.4 g
Garanti ak sipò
Pou enfòmasyon sou garanti a ak sipò kliyan, tanpri al gade dokiman ki vini ak acha ou a oswa vizite sit entènèt ofisyèl Honeywell Home. websit la. Kenbe prèv acha ou pou reklamasyon garanti.
