1. Enfòmasyon enpòtan sou sekirite
Tanpri li epi konprann tout enstriksyon yo anvan ou kòmanse enstalasyon an. Si ou pa fè sa, sa ka lakòz chòk elektrik, dife, oswa lòt blesi ki ka fatal oswa lakòz domaj materyèl.
- AVÈTISMAN: Risk pou chòk elektrik. Dekonekte kouran an nan disjonktè a oswa bwat fizib la anvan enstalasyon oswa antretyen.
- Tout koneksyon elektrik yo dwe fèt an akò ak kòd lokal yo, òdonans yo, oswa Kòd Elektrik Nasyonal la (NEC). Konsilte yon elektrisyen kalifye si ou pa abitye ak koneksyon fil elektrik ki kòrèk yo.
- Sèvi ak sèlman konektè fil ki nan lis UL/cUL.
- This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm (Proposition 65 warning). Wash hands after handling.
2. Pwodwi souview
The Progress Lighting P5607-31 is a traditional 1-light outdoor wall lantern featuring clear flat glass and a textured black finish. It is designed for outdoor use, providing illumination for porches, patios, and other exterior areas.
Figi 2.1: Devan view of the Progress Lighting P5607-31 outdoor wall lantern in textured black with clear glass.
Figi 2.2: Line drawing illustrating the design of the P5607-31 outdoor wall lantern.
3. Enstalasyon ak Enstalasyon
3.1 Kontni pake a
Verify that all components are present before beginning installation. The package typically includes the fixture, mounting hardware, and an installation sheet.
3.2 Pre-Enstalasyon
- Koupe kouran an nan disjonktè prensipal la oswa nan bwat fizib la.
- Carefully unpack the fixture and components.
3.3 Monte aparèy la
This fixture is designed for wall mounting. Ensure the mounting surface is secure and can support the weight of the fixture.
- Tache bracket aliye a nan bwat junction la lè l sèvi avèk vis yo bay yo.
- Ensure the bracket is level and securely fastened.
3.4 Koneksyon elektrik
Connect the fixture wires to the house wires according to the following:
- Konekte fil nwa a ki soti nan aparèy la ak fil nwa (cho) ki soti nan bwat koneksyon an.
- Konekte fil blan ki soti nan aparèy la ak fil blan (net) ki soti nan bwat koneksyon an.
- Connect the bare copper or green ground wire from the fixture to the green or bare copper ground wire from the junction box.
- Secure all connections with UL/cUL listed wire connectors.
3.5 Fikse aparèy la
- Ak anpil atansyon mete tout fil nan bwat junction la.
- Align the fixture with the mounting bracket and secure it using the provided screws or nuts.
3.6 Enstalasyon anpoul
This fixture uses one (1) 100-Watt maximum, medium base (E26) bulb. An A19 shape bulb is recommended for optimal appearance with the clear glass.
Figi 3.1: Bulb information indicating an E26 (Medium Base) bulb and recommending an A19 bulb shape for this fixture.
- Screw the bulb into the socket until snug. Do not overtighten.
- This fixture is dimmable when used with compatible wall dimmers and dimmable light bulbs.
3.7 Plasman Rekòmande
For aesthetic balance, wall lanterns are often sized to be approximately 1/4 the height of the door they flank.
Figi 3.2: Example of wall lantern height recommendation: 1/4 of the door height. For a 96-inch door, a 24-inch fixture is suggested.
Figi 3.3: Illustration of outdoor wall lantern placement on a house, demonstrating appropriate sizing and spacing for garage and entryways.
4. Operasyon
Once installed and power is restored, the fixture operates by a standard wall switch. If a compatible dimmer switch and dimmable bulb are used, the light output can be adjusted.
5. Antretyen
5.1 Netwayaj
Pou netwaye aparèy la, etenn kouran an epi siye l ak yon twal mou.amp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass.
5.2 Ranplasman anpoul
Before replacing the bulb, ensure the power is turned off at the circuit breaker. Allow the bulb to cool completely before touching. Replace with a new 100-Watt maximum, E26 base bulb.
NAN. Depanaj
- Limyè pa limen:
- Check that the power is turned on at the circuit breaker.
- Ensure the bulb is securely screwed into the socket and is not burnt out.
- Verifye tout koneksyon elektrik yo byen fèm.
- Inspect for any defective electrical components or wiring.
- Fuse blows or circuit breaker trips:
- Check for crossed wires or short circuits.
- Asire w anpoul latage does not exceed the fixture's maximum rating (100W).
7. Espesifikasyon
Figi 7.1: Detailed dimensions of the P5607-31 fixture, showing a width of 4-9/16 inches and a height of 8-5/8 inches.
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | P5607-31 |
| Mak | Pwogrè ekleraj |
| Dimansyon (L x W x H) | 4.5" x 4.5" x 8" (4-9/16" W x 8-5/8" H) |
| Pwa atik | 1 liv (16 ons) |
| Materyèl | Aliminyòm |
| Fini Kalite | Clear (Glass) |
| Koulè | Nwa |
| Style | Tradisyonèl |
| Kalite sous limyè | Incandescent (compatible with LED) |
| Baz anpoul | E26 (Baz Mwayen) |
| Max watage | 100 Watts |
| Voltage | 120 Volts |
| Klète | 1600 lumen (with 100W incandescent) |
| Nivo rezistans dlo | Dlo rezistan |
| Kalite aliye | Pwoteksyon (Monte sou miray) |
| UPC | 785247560738 |
8. Enfòmasyon sou Garanti
Pwodui Progress Lighting sa a kouvri pa yon 1-ane garanti limite. This warranty guarantees your satisfaction with the purchase and includes professional after-sales customer service support. For specific details regarding warranty claims or service, please refer to the original purchase documentation or contact Progress Lighting customer service.
9. Sipò
For further assistance, technical support, or to inquire about replacement parts, please contact Progress Lighting customer service. Contact information can typically be found on the manufacturer's official websit la oubyen sou anbalaj pwodwi a.
