Flowtron BK-15

Flowtron Electric Bug Zapper BK-15 Instruction Manual

Model: BK-15 | Brand: Flowtron

1. Entwodiksyon

The Flowtron Electric Bug Zapper BK-15 is an outdoor insect control device designed to reduce populations of flying insects in areas up to 1/2 acre. It utilizes a combination of ultraviolet (UV) light and an octenol attractant to lure insects into a high-voltage killing grid. This manual provides essential information for the safe and effective setup, operation, and maintenance of your bug zapper.

Flowtron Electric Bug Zapper BK-15

The Flowtron Electric Bug Zapper BK-15, designed for outdoor insect control.

2. Enfòmasyon enpòtan sou sekirite

Please read and understand all safety instructions before operating this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

UL and EPA Certifications

UL and EPA certifications for the Flowtron Bug Zapper, indicating compliance with safety and environmental standards.

3. Pake kontni

Verifye ke tout konpozan yo prezan nan pake a:

Flowtron Bug Zapper Components

Diagram illustrating the main components of the Flowtron Bug Zapper, including the hanging ring, UV bulb, killing grid, and octenol attractant.

4. Enstalasyon ak Enstalasyon

4.1 Debake

Carefully remove the bug zapper and all accessories from the packaging. Retain packaging for future storage or transport.

4.2 Gid pou plasman yo

Proper placement is crucial for effective insect control and safety:

Flowtron Bug Zapper Components and Features

Detaye view of the Flowtron Bug Zapper components, highlighting the hanging ring, 15W UV replaceable bulb, 5600V non-clogging killing grid, polycarbonate weatherproof housing, and octenol attractant slot.

Flowtron Bug Zapper in a Yard

The Flowtron Bug Zapper operating outdoors, demonstrating its placement in a yard, away from children and pets.

4.3 Attractant Installation

The unit includes an octenol attractant cartridge to enhance its effectiveness, particularly against mosquitoes. Locate the designated slot for the attractant cartridge, typically at the bottom of the unit. Insert the cartridge as directed. The heat from the UV lamp will warm and vaporize the attractant, releasinvoye l nan lè a.

4.4 Koneksyon pouvwa

Once properly placed and the attractant is installed, plug the unit into a suitable, grounded outdoor electrical outlet. The unit will immediately begin operation.

5. Operasyon Enstriksyon

The Flowtron Electric Bug Zapper BK-15 operates continuously once plugged into a power source. There is no on/off switch on the unit itself; operation is controlled by plugging and unplugging the unit, or by using a switched outdoor outlet.

Flowtron Bug Zapper Attracting Insects

The Flowtron Bug Zapper attracting various insects using its UV light and octenol attractant, showing the effective coverage area.

Flowtron Bug Zapper Day and Night Operation

Illustration showing the Flowtron Bug Zapper operating effectively during nighttime hours for optimal insect control.

6. Antretyen

Regular maintenance ensures the longevity and effectiveness of your bug zapper.

6.1 Cleaning the Kill Grid

Avèk tan, ensèk mouri yo ka akimile sou sifas ki gen gwo volim nan.tage grid. While the non-clogging design helps insects fall to the ground, occasional cleaning may be necessary.

Zapped Insects Falling from Grid

Illustration showing zapped insects falling to the ground, indicating the non-clogging design of the kill grid.

6.2 UV Bulb Replacement

The 15W UV light bulb should be replaced annually to maintain optimal insect attraction, even if it still appears to be working. UV output diminishes over time.

Replacing UV Bulb in Flowtron Bug Zapper

A hand demonstrating the process of replacing the UV light bulb in the Flowtron Bug Zapper.

6.3 Octenol Cartridge Replacement

The octenol attractant cartridge has an effective life of approximately 100 hours. Replace it regularly to maintain enhanced mosquito attraction.

NAN. Depanaj

Gade tablo ki anba a pou pwoblèm komen ak solisyon yo:

PwoblèmKòz posibSolisyon
Unit does not light up.No power to outlet, faulty UV bulb.Check power source. Test outlet with another appliance. Replace UV bulb if necessary.
Few insects are being zapped.Incorrect placement, old octenol attractant, old UV bulb, competing light sources.Relocate unit further from human activity and other lights. Replace octenol cartridge. Replace UV bulb.
Unit makes a continuous sizzling sound.Large insect or debris stuck in the kill grid.Unplug the unit. Carefully remove the obstruction using a non-conductive tool (e.g., a plastic brush handle).

8. Spécifications pwodwi

Key specifications for the Flowtron Electric Bug Zapper BK-15:

KarakteristikSpesifikasyon
MakFlowtron
ModèlBK-15
Dimansyon (L x W x H)5.5" x 5.5" x 11.8"
Pwa atik4.1 liv
Zòn KouvètiJiska 1/2 kawo tè
Kill Grid Voltage5600V
UV Light Wattage15W
AttractantOctenol (100-hour cartridge included)
MateryèlPolikarbonat Lojman
SètifikasyonUL sètifye
Flowtron Bug Zapper Dimensions

Diagram showing the dimensions of the Flowtron Electric Bug Zapper BK-15: 5.5 inches length, 5.5 inches width, and 11.8 inches height.

9. Garanti ak sipò

This Flowtron product is covered by a manufacturer's warranty. For specific warranty details, product support, or to inquire about replacement parts (such as UV bulbs or octenol cartridges), please refer to the official Flowtron website or contact their customer service directly. You can visit the Flowtron store for more information: Flowtron Store.

Dokiman ki gen rapò - BK-15

Preview Manyèl Pwopriyetè ak Gid Enstalasyon Flowtron MC-9000 pou Asasen Ensèk Elektwonik
Manyèl konplè pou pwopriyetè Flowtron MC-9000 Elektwonik pou touye moustik, ki kouvri enstalasyon, sekirite, antretyen, depanaj ak akseswa. Karakteristik yo enkli yon garanti limite yon ane ak yon atraksyon moustik efikas.
Preview Flowtron Electronic Insect Killer BK-15D, BK-40D, BK-80D: Installation, Operation, and Maintenance Guide
This guide provides detailed instructions for the installation, operation, maintenance, and troubleshooting of Flowtron Electronic Insect Killer models BK-15D, BK-40D, and BK-80D. It includes safety precautions, warranty information, and accessory details.
Preview Flowtron Modèl 14044: Gid Enstalasyon ak Operasyon pou Asasen Ensèk Elektwonik
Enstriksyon konplè pou enstale, opere, ak kenbe aparèy pou touye ensèk elektwonik Flowtron Modèl 14044 la. Gen ladan l prekosyon sekirite, depanaj ak enfòmasyon sou garanti.
Preview Gid Itilizatè Bug Zapper BK-19 | Myelechome Moustikè
Gid konplè pou itilizatè a pou Myelechome Bug Zapper Modèl BK-19 la. Aprann plis sou karakteristik li yo, espesifikasyon li yo, itilizasyon an sekirite, ak antretyen li pou yon kontwòl ensèk nuizib efikas.