Anern AN-FGI-AS 3600W Solar Inverter User Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your Anern AN-FGI-AS 3600W Solar Inverter. This pure sine wave inverter with a 120A MPPT charge controller is designed to provide reliable power for various applications, including home, RV, and off-grid solar systems. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

Anern 3600W Hybrid Solar Inverter with key specifications — Figure 1: Anern AN-FGI-AS 3600W Hybrid Solar Inverter with specifications (3600W, 120A Max Charging Current, 24VDC Nominal Output Voltage, 500VDC Max DC Voltage, 110V Voltagak).

2. Enstriksyon Sekirite

Atansyon:

The starting power of inductive loads (e.g., motors, compressors) should be at least three times the rated power of the inverter. Excessive power on can damage the inverter.
Connect the circuits correctly and install appropriate circuit breakers for each circuit to prevent damage and ensure safety.
Always follow the correct power-on and power-off sequence to protect the inverter and connected equipment.

Prekosyon Sekirite Jeneral:

Asire w ke envèstisè a enstale nan yon zòn ki byen ayere, lwen materyèl ki ka pran dife ak imidite.
Do not attempt to open or repair the inverter yourself. Refer all servicing to qualified personnel.
Keep children and unauthorized persons away from the inverter and its connections.
Mete ekipman pwoteksyon pèsonèl (PPE) ki apwopriye lè w ap travay ak sistèm elektrik yo.

3. Pwodwi souview ak Karakteristik

The Anern AN-FGI-AS 3600W Solar Inverter is a versatile power solution with advanced features for efficient energy management.

Karakteristik kle:

Pure sine wave output for compatibility with sensitive electronics.
D' configurable voltagGam pou aparèy kay ak òdinatè pèsonèl atravè paramèt LCD.
Kouran chaj batri konfigirab ki baze sou aplikasyon yo atravè paramèt LCD.
Priyorite konfigirab pou chajè AC/solè atravè paramèt LCD a.
Konpatib ak voltage oswa pouvwa dèlko.
Automatic restart while AC is recovering.
Built-in protections: Overload, Over temperature, Short circuit.
Konsepsyon plato batri entelijan pou pèfòmans batri optimize.
Fonksyon demaraj frèt.
Aktivasyon otomatik batri ityòm entegre.
Segondè PV opinyon voltage ranje (60-500VDC).
Multiple operating modes: INVERTER MODE, PV MODE, UTILITY MODE.
Restorasyon nan paramèt faktori ak yon sèl kle.
Intelligent Remote Monitoring capability.
Emergency Operation support.
Military-grade Protection Performance.
LCD Screen Display for easy monitoring.
Efficient Charging Output.

Detailed features of Anern solar inverter including battery activation, PV input, operating modes, and smart functions — Figure 2: Inverter features including battery activation, PV input range, operating modes, and smart functions.

Anern inverter compatible with various battery types and supporting battery-less operation — Figure 3: Battery compatibility (FLD, GEL, AGM, LI, USER) and battery-less operation capability.

Anern inverter powering common household appliances like fridge, air conditioner, washing machine, and microwave — Figi 4: Egzamples of household appliance applications.

Anern inverter application scenarios for home, solar station, RV, and yacht — Figure 5: Various application scenarios for the inverter.

4. Espesifikasyon

Atribi	Valè
Nimewo Modèl	AN-FGI-AS 3600W
Non mak	ANERN
Kalite Sòti	DOUBLE
Sòti aktyèl	18A
Sòti Frekans	50Hz
Gwosè	550 * 430 * 210mm
Pwa	10kg
Se yon aparèy entelijan	Wi
Orijin	Lachin tè pwensipal
Sètifikasyon	CE, RoHS
Pwodui chimik ki gen anpil enkyetid	Okenn

Certificate of Conformity for Anern Inverter, showing CE and RoHS certifications — Figure 6: Certificate of Conformity (CE, RoHS).

5. Enstalasyon ak Enstalasyon

Proper installation is crucial for the safe and efficient operation of your solar inverter. Please follow these guidelines carefully.

Etap enstalasyon:

Montaj: Choose a suitable location for mounting the inverter. Ensure it is a well-ventilated area, protected from direct sunlight, moisture, and extreme temperatures.
Fil elektrik:
- Connect the battery bank to the inverter's battery terminals. Ensure correct polarity (positive to positive, negative to negative).
- Connect the solar PV array to the inverter's PV input terminals. Observe correct polarity and voltage limits (60-500VDC).
- Connect the AC input (mains or generator) to the inverter's AC input terminals.
- Connect your loads (appliances) to the inverter's AC output terminals.
- Install appropriate circuit breakers for each circuit (battery, PV, AC input, AC output) as per local electrical codes.
Pouvwa-Sou Sekans:
1. Premyèman, limen batri a.
2. Then, start the inverter.
3. Next, turn on the circuit breakers for photovoltaic (PV) input.
4. Finally, turn on the circuit breakers for mains (AC input) and load (AC output).
Power-Off Sequence (Reverse Order):
1. Turn off the circuit breakers for load and mains.
2. Turn off the circuit breakers for photovoltaic (PV) input.
3. Etenn varyateur la.
4. Finalman, etenn batri a.

Wiring diagram for Anern solar inverter showing connections for PV input, AC input, Battery, and AC output — Figure 7: General wiring diagram for the solar inverter. Consult a qualified electrician for specific installation requirements.

6. Operasyon Enstriksyon

Your Anern solar inverter offers flexible operation modes and settings via its LCD display.

Mòd operasyon:

MÒD ENVÈTÈ: The inverter converts DC power from batteries into AC power for your loads.
MÒD PV: Prioritizes solar power to supply loads and charge batteries.
MÒD ITILITE: Prioritizes grid power to supply loads and charge batteries.

Anviwònman LCD:

The LCD display allows you to configure various parameters:

Antre Voltage Range: Adjust for compatibility with home appliances or personal computers.
Kouran chaj batri: Set the charging current based on your battery type and capacity.
Priyorite chajè AC/Solè: Define whether AC or solar charging takes precedence.
Factory Settings Restoration: Use the one-key restoration function to revert to default settings if needed.

Refer to the on-screen menu for detailed navigation and parameter adjustments.

7. Antretyen

Antretyen regilye asire lonjevite ak pèfòmans optimal envèstisè ou a.

Netwayaj: Periodically clean the inverter's exterior with a dry, soft cloth. Ensure ventilation openings are free from dust and debris.
Koneksyon: Chak ane, tcheke tout koneksyon elektrik yo pou wè si yo sere epi si gen siy korozyon.
Anviwònman: Asire w ke anviwònman enstalasyon an rete nan limit tanperati ak imidite espesifye yo.
Sante batri: Monitor battery health and ensure they are properly maintained according to their manufacturer's guidelines.

Warning: Disconnect all power sources (PV, AC, Battery) before performing any maintenance or cleaning.

NAN. Depanaj

Seksyon sa a bay solisyon pou pwoblèm komen ou ka rankontre. Pou pwoblèm ki pa nan lis la a, tanpri kontakte sèvis kliyan.

Pwoblèm	Kòz posib	Solisyon
Envèstisè a pa limen	No battery power; incorrect wiring; faulty switch	Check battery connections and charge level; verify all wiring; ensure power switch is ON.
Pa gen pwodiksyon AC	Twòp chaj; kous kout; vòltaj batri ki batage; inverter fault	Reduce load; check for short circuits; charge batteries; restart inverter.
Chaj PV a pa fonksyone	No sunlight; PV array disconnected; incorrect PV voltage	Check solar conditions; verify PV connections; ensure PV voltage is within range (60-500VDC).
Overload/Over temperature error	Too many loads; insufficient ventilation	Reduce connected loads; ensure proper airflow around the inverter.

9. Konsèy itilizatè yo

For optimal battery life, ensure your battery charging current settings match your battery manufacturer's recommendations.
When using inductive loads, remember the "three times rated power" rule for starting power to avoid inverter damage.
Regularly check the LCD display for system status and any error codes to proactively address potential issues.

10. Garanti ak sipò

The Anern AN-FGI-AS 3600W Solar Inverter is certified with CE and RoHS, ensuring compliance with European safety and environmental standards.

For technical support, warranty claims, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt and product serial number handy for faster service.