Manyèl Itilizatè Envèstisè Solè Ibrid Anern

1. Entwodiksyon

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Anern 5KW or 6.5KW Hybrid Solar Inverter. This high-frequency inverter features a pure sine wave AC output, MPPT solar charging, and dual AC output capabilities. It is designed to integrate solar power with utility grids and can operate with or without a battery, supporting both lithium and lead-acid battery types.

Figure 1: Anern FGI-S5000 Hybrid Solar Inverter

2. Karakteristik kle

• Rated power 5.0KW/5.0KVA (AN-FGI-S5000) or 6.5KW/6.5KVA (AN-FGI-S6500), with a power factor of 1.
• MPPT (Maximum Power Point Tracking) range: 60V~450V, 500Voc.
• High-frequency inverter design for small size and light weight.
• Pure sine wave AC output for sensitive electronics.
• Capable of powering loads simultaneously from solar and utility grid.
• Equipped with CAN/RS485 for Battery Management System (BMS) communication.
• Ability to operate without a battery (batteryless mode).
• Optional WiFi remote monitoring.
• Dual AC output for flexible load management.
• Fonksyonalite koneksyon ak griy elektrik la.

3. Pwodwi souview

The inverter features a user-friendly interface and clearly labeled connection ports.

3.1 Panèl Devan ak Ekran

Figi 2: Panèl Devan anlèview

1. AC Endikatè
2. Endikatè Envèse
3. Chaje Endikatè
4. Fay Endikatè
5. LCD Display
6. ESC bouton
7. Up bouton
8. Desann bouton
9. Antre bouton
10. Limyè RGB

Mòd limyè RGB:

• Standby mode: White
• Battery mode: Red
• City electricity mode: Blue
• PV mode: Orange

3.2 Panèl dèyè ak koneksyon

Figi 3: Koneksyon Panèl Dèyè a

• AC nan: Utility grid input.
• Main Sòti: Primary AC output for rated power loads.
• Second Output: Secondary AC output for loads up to one-third of the rated power.
• WiFi: Port for optional WiFi remote monitoring module.
• BMS: Communication port for Battery Management System (RJ45).
• BAT+/-: Battery connection terminals.
• PV In: Solar panel input terminals.
• ON/OFF: Pouvwa switch.

4. Espesifikasyon

Tablo 1: Espesifikasyon teknik

5. Enstalasyon ak Enstalasyon

5.1 Dyagram Sistèm

The following diagram illustrates a typical hybrid solar energy storage system setup:

Figure 4: Hybrid Solar Energy Storage System Diagram

This diagram shows the connection of solar panels, grid, generator, inverter, battery (lithium/lead-acid), and home loads, with cloud and app monitoring capabilities.

5.2 Batteryless Mode

The inverter supports a batteryless mode, allowing it to power loads directly from PV/AC sources without a connected battery. This offers a simpler, plug-and-play wiring solution compared to traditional battery-dependent systems.

Figure 5: Batteryless Mode Operation

5.3 Battery Connection and Type Selection

The inverter is compatible with both lithium and lead-acid batteries. When connecting a lithium battery, ensure compatibility with the inverter's communication protocol via the RJ45 BMS port.

Figure 6: Selectable Battery Types

The inverter supports the following battery types, configurable via the display:

• AGM (default)
• FLD (Inonde)
• LIB (Lithium Ternary Battery)
• FEL (Lithium Iron)
• CUS (User-Defined)

For lithium battery connections, verify the compatibility of the battery's protocol with the inverter. There are two connectors on the lithium battery: an RJ45 port for BMS communication and a power cable.

5.4 Sòti Doub AC

The inverter provides two AC outputs:

• Main Sòti: Designed for connecting to a rated power load.
• Second Output: Can be connected to a load of up to one-third of the rated power.

6. Operasyon

6.1 Solar Charging Priority Modes

The inverter offers flexible solar charging priority settings to optimize energy usage:

Figure 7: Solar Charging Priority Options

• Solè An Premye: Solar energy is prioritized to charge the battery. The utility grid will only charge the battery if solar energy is unavailable.
• Solè ak sèvis piblik: Both solar energy and the utility grid will charge the battery simultaneously.
• Only Solar Charging: Solar energy is the exclusive charging source, regardless of utility availability.

These modes can be configured via the inverter's LCD display or optional WiFi monitoring application.

7. Antretyen

To ensure optimal performance and longevity of your Anern Hybrid Solar Inverter, regular maintenance is recommended:

• Netwayaj: Keep the inverter's exterior clean and free from dust and debris. Ensure ventilation openings are unobstructed.
• Koneksyon: Tcheke tout koneksyon elektrik yo (PV, batri, antre/soti AC) detanzantan pou wè si yo sere epi si gen siy korozyon.
• Anviwònman: Ensure the inverter is operating within its specified temperature and humidity ranges. Avoid exposure to direct sunlight or excessive moisture.
• Mizajou mikrolojisyèl: If available, consider updating the inverter's firmware via the optional WiFi module to benefit from performance improvements and new features.

NAN. Depanaj

This section provides guidance on common issues you might encounter:

• Pa gen kouran/Ekspozisyon etenn: Check AC input, battery connections, and the ON/OFF switch. Ensure sufficient PV input if operating in solar-only mode.
• Endikatè Fay la Limen: Refer to the inverter's display for specific error codes. Common faults include over-voltage, anba-voltage, overload, or short circuit. Address the underlying cause before restarting.
• Ba puisans pwodiksyon: Verifye volim antre PV atage and current are within specifications. Check battery charge level and health. Ensure loads do not exceed the inverter's rated capacity.
• Batri pa chaje: Check PV panel connections and ensure sufficient sunlight. Verify AC input if utility charging is enabled. Confirm battery type settings are correct.
• BMS Communication Issues: Ensure the RJ45 cable is securely connected and the lithium battery's protocol is compatible with the inverter.

Pou pwoblèm ki pèsiste, konsilte yon teknisyen kalifye oswa kontakte sèvis kliyan.

9. Konsèy itilizatè yo

• Batri konpatibilite: The inverter is suitable for LiFePo4 batteries, as it supports both Lithium and Lead-acid types. Always ensure the specific battery's BMS protocol is compatible.
• Kouran Antre PV: The inverter is designed to handle a maximum PV input current of 27 Amperes, as indicated in the specifications (Max PV Input Current/Power: 27A/9000W).
• Siveyans: Utilize the optional WiFi module for remote monitoring to keep track of your system's performance and settings from anywhere.

10. Garanti ak sipò

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact Anern customer service. Keep your purchase receipt as proof of purchase.

Figi 8: Sètifikasyon pwodwi yo