1. Pwodwi souview
The JONSBO CB40 Xiaoxue series is a third-generation 12CM single tower heat sink designed for efficient CPU cooling. It features 4 heat pipes and a unique top cover with classic circular holes, a metal texture nameplate, and an offset long strip shaped thousand-layer illusion embellishment, creating a distinctive three-dimensional lighting effect. The cooler's heat pipes and fans have been optimized for superior heat dissipation efficiency. This manual provides detailed instructions for installation, operation, and maintenance of your CB40 Air Cooler.
2. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Version | ARGB version |
| Kalite pi fre | Tower |
| Heat Sink Dimensions (L*W*H) | 120mm * 71mm * 153.5mm |
| Heat Pipe Size | Ø6mm * 4pcs |
| D-TDP | 225W |
| Fan Dimensions (L*W*H) | 120mm * 120mm * 25mm |
| Vitès fanatik | 800-1800 RPM ± 10% |
| Fan Air Volume | 37.77-77.07 CFM |
| Presyon fanatik | 0.42-1.86 mmH2O |
| Fanatik bri | 21.8-35.4 dB(A) (MAX) |
| Lavi Fanatik | 230,000 hours (at 25℃ Room Temp) |
| Entèfas pouvwa | PWM 4PIN |
| ARGB Interface | 5V-3PIN ARGB |
| Working Current (Fan/LED) | FAN 0.27A, LED 0.30A |
| Travay Voltage (Fan/LED) | FAN 12V, LED 5V |
| Power Consumption (Fan/LED) | FAN 3.24W, LED 1.5W |
| Sokèt CPU ki sipòte | INTEL: LGA1150, LGA 1151, LGA 1155, LGA 1156, LGA1200, LGA 1700, LGA 1851 AMD: AM4, AM5 |
| Sètifikasyon | CE, RoHS |
| Kantite lam | 7 |
| Kalite kote yo pote | Kote yo pote likid |
| Fan Lines | 4 LINE |
| Pwa pake | 0.84 kg |
| Dimansyon pake (L * W * H) | 23cm * 18cm * 12cm |
3. Pake kontni
Tanpri verifye ke tout konpozan yo prezan nan pake ou a:
- JONSBO CB40 CPU Cooler (with pre-installed 12cm ARGB fan)
- Universal Mounting Backplate
- Intel Mounting Brackets (Metal fastening strips)
- AMD Mounting Brackets (Metal fastening strips)
- Various Screws and Washers
- Paste tèmik
- Spacer Bars (11.8mm for LGA115X/1200, 10.8mm for LGA1700/1851, 10mm for AM4/AM5)
4. Gid Enstalasyon
Follow these steps carefully to install your JONSBO CB40 Air Cooler. Ensure your system is powered off and unplugged before beginning installation.
4.1. Pre-Enstalasyon
- Depake tout konpozan yo epi verifye yo avèk lis sa ki nan pake a.
- Clean the CPU surface thoroughly to remove any old thermal paste or debris.
- Apply a small amount of thermal paste (included) to the center of your CPU's integrated heat spreader (IHS).
4.2. Intel Platform Installation (LGA115X/1200/1700/1851)
- Attach the universal backplate to the rear of your motherboard, aligning the holes with the CPU socket.
- Insert the appropriate spacer bars onto the backplate screws from the front side of the motherboard:
- LGA115X/1200: Use 11.8mm spacer bars.
- LGA1700/1851: Use 10.8mm spacer bars.
- Place the Intel metal fastening strips onto the spacer bars, aligning the screw holes.
- Position the CB40 cooler onto the CPU, ensuring the base makes even contact with the thermal paste.
- Secure the cooler by tightening the screws through the fastening strips into the backplate. Tighten in a diagonal pattern until snug, but do not overtighten.
4.3. AMD Platform Installation (AM4/AM5)
- Attach the universal backplate to the rear of your motherboard, aligning the holes with the CPU socket.
- Insert the appropriate spacer bars onto the backplate screws from the front side of the motherboard:
- AM4/AM5: Use 10mm spacer bars.
- Place the AMD metal fastening strips onto the spacer bars, aligning the screw holes.
- Position the CB40 cooler onto the CPU, ensuring the base makes even contact with the thermal paste.
- Secure the cooler by tightening the screws through the fastening strips into the backplate. Tighten in a diagonal pattern until snug, but do not overtighten.
4.4. Fan & ARGB Connection
- Connect the 4-pin PWM fan cable from the CB40 cooler to the CPU_FAN header on your motherboard.
- Connect the 3-pin 5V ARGB cable from the CB40 cooler to a compatible 5V ARGB header on your motherboard. Ensure correct polarity to avoid damage.
5. Operating Instructions (ARGB Lighting)
The JONSBO CB40 cooler features addressable RGB (ARGB) lighting, allowing for customizable illumination effects.
- Ensure the 3-pin 5V ARGB cable is securely connected to a compatible ARGB header on your motherboard.
- Install your motherboard's dedicated RGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync).
- Launch the software and use its interface to select desired lighting modes, colors, and effects. The CB40 supports over 16 million color effects.
- The 5V ARGB plug supports male and female connections, enabling you to daisy-chain other compatible ARGB devices for synchronized lighting across your system.
6. Antretyen
Regular maintenance helps ensure optimal cooling performance and extends the lifespan of your JONSBO CB40 Air Cooler.
- Netwayaj Vantilatè: Periodically remove dust buildup from the fan blades and heatsink fins. Use compressed air or a soft, dry brush. Ensure the system is powered off and the fan is not spinning during cleaning.
- Pat tèmik: If you remove the cooler for any reason, or if you notice a significant increase in CPU temperatures over time, it is recommended to clean off the old thermal paste and apply a fresh layer before reinstallation.
- Jesyon kab: Ensure all cables (PWM and ARGB) are neatly routed and not obstructing airflow or fan movement.
NAN. Depanaj
If you encounter issues with your JONSBO CB40 Air Cooler, refer to the following common problems and solutions:
-
Fan not spinning / No RGB lighting:
- Check that the 4-pin PWM fan cable is securely connected to the CPU_FAN header on your motherboard.
- Verify that the 3-pin 5V ARGB cable is correctly connected to a compatible ARGB header on your motherboard.
- Ensure your motherboard's BIOS/UEFI settings are configured to enable fan control and RGB lighting.
- Confirm that the motherboard's RGB synchronization software is installed and properly configured.
-
Tanperati CPU ki wo:
- Verify that the cooler is securely mounted to the CPU with adequate and even pressure.
- Ensure thermal paste was applied correctly and evenly across the CPU's IHS.
- Check for excessive dust buildup on the heatsink fins and fan blades, which can impede airflow.
- Confirm that the fan is spinning at appropriate speeds. You can check fan RPM in your motherboard's BIOS/UEFI or using system monitoring software.
- Asire w ke gen ase lè k ap sikile anndan bwat òdinatè w la.
-
Excessive noise from the cooler:
- Check for any loose fan screws or obstructions (e.g., cables) that might be hitting the fan blades.
- Ensure the fan blades are clean and free of debris.
- Verify fan speed settings in your motherboard's BIOS/UEFI or fan control software. High fan speeds will naturally produce more noise.
8. Konsèy itilizatè yo
- For optimal cooling performance, ensure your PC case has good overall airflow with properly configured intake and exhaust fans.
- When applying thermal paste, a small pea-sized dot in the center of the CPU is often sufficient, as the cooler's pressure will spread it evenly.
- After installation, use your motherboard's monitoring software to check CPU temperatures and fan speeds to confirm proper operation.
- Experiment with different ARGB lighting effects using your motherboard's software to personalize your build's aesthetics.
9. Garanti ak sipò
The JONSBO CB40 Air Cooler comes with a 3 ane garanti pwodwi soti nan dat acha a.
For technical assistance, warranty claims, or any product-related inquiries, please contact your original retailer or visit the official Jonsbo websit pou resous sipò.
