VEVOR ZTGD1000 Series

VEVOR ZTGD1000 Series Garage Door Opener

Manyèl Enstriksyon Itilizatè

1. Pwodwi souview

The VEVOR ZTGD1000 Series Garage Door Opener is designed for convenient and secure operation of garage doors. Featuring a powerful AC motor, it provides reliable pulling and pushing force for various garage door types. This opener incorporates advanced technology for smooth operation and includes safety features to protect against obstacles.

1.1 Karakteristik kle

  • Pwisan motè: Available in 800 N and 1000 N pulling/pushing force options.
  • Operasyon trankil: Operates at less than 60 dB for a peaceful environment.
  • Kontwòl Remote: Equipped with two wireless remote controls for convenient access.
  • Adjustable Automatic Closing: Automatically detects obstacles and stops during operation.
  • Self-Lock Design: Engages self-lock in case of power failure for added security.
  • Ekleraj otomatik: Integrated light turns off automatically after 3-5 minutes.
VEVOR ZTGD1000 Series Garage Door Opener main unit

Figure 1: Main unit of the VEVOR Garage Door Opener

2. Enstriksyon Sekirite

AVÈTISMAN: Si ou pa swiv enstriksyon sekirite sa yo, ou ka blese gravman oswa domaje materyèlman.

  • Children are strictly forbidden to touch the control devices or play near the garage door opener.
  • Installation, maintenance, and repairs must be conducted by qualified professionals only.
  • Ensure the power supply is disconnected before performing any maintenance or repair work.
  • Keep hands and loose clothing away from moving parts of the opener and door.
  • Regularly inspect the garage door system for signs of wear or damage.
  • Do not operate the opener if the garage door is damaged or malfunctioning.

3. Pake kontni

Verifye ke tout konpozan yo prezan epi yo pa domaje anvan ou kòmanse enstalasyon an.

Package contents of the VEVOR Garage Door Opener kit

Figure 2: Included components in the package

3.1 Standard Package List

  • 1 x Garage Gate Opener (ZTGD1000 for 1000N model)
  • 2 x kontwòl remote
  • 1 x Set of Guide Rail (3 m chain)
  • 1 x Set of Installation Accessories (bolts, brackets, etc.)
  • 1 x Manyèl Itilizatè (dokiman sa a)

NOTE: Garage door itself is not included.

4. Espesifikasyon

4.1 Espesifikasyon Jeneral

KarakteristikSpesifikasyon
Motè Voltage24V DC
Rated VoltageAC 220V (EU) / 110V (US)
Operasyon bri<60dB
Kouri vitès120 mm/s
Kòd kontwòl RemoteKòd woule
Frekans Remote433.92MHZ
Remote Battery Voltage12V, 27A
Oto eklerajLi etenn apre 3 ~ 5 minit
Longè Rail9.8 pye / 3 m (chèn)
SètifikasyonCE

4.2 Model-Specific Specifications

ModèlFòs rale ak pousePouvwa motèMax. Applicable Area
800 N800 N120W max12 m² maksimòm
1000 N1000 N150W max15 m² maksimòm
Side view of the garage door opener unit with dimensions

Figure 3: Approximate dimensions of the main unit (41.5"/105.4cm length, 8"/20.3cm width, 6"/15.2cm height)

5. Enstalasyon ak Enstalasyon

The VEVOR Garage Door Opener is designed for convenient installation. All necessary hardware is included in the package. Please follow these general steps for assembly and mounting. Refer to the detailed installation diagram for visual guidance.

5.1 Enstalasyon souview

Installation diagram showing main unit, rail, door attachment, and sensor placement

Figure 4: General installation diagram

  • Mounting the Main Unit (A): Secure the main opener unit to the ceiling or appropriate support structure above the garage door.
  • Assembling the Guide Rail (B): Connect the sections of the 3-meter chain guide rail. Ensure the chain is correctly tensioned.
  • Attaching to the Door (C): Connect the guide rail to the garage door using the provided attachment bracket. This allows the opener to pull and push the door.
  • Installing Safety Sensors (D): Mount the safety sensors near the bottom of the garage door opening. These sensors detect obstacles and prevent the door from closing on them. Ensure they are aligned correctly.
  • Fil elektrik: Connect the power cord to a suitable AC outlet (220V or 110V depending on model/region). Connect any additional wiring for safety sensors or wall controls as per the detailed wiring diagram in the included user manual.

5.2 Self-Lock Mechanism

The opener features a self-lock design that automatically engages in the event of a power failure. This prevents the garage door from being manually opened without disengaging the lock. To manually operate the door during a power outage, locate the manual release handle on the opener carriage and pull it to disengage the door from the opener mechanism.

Detail of the self-lock mechanism on the garage door opener rail

Figure 5: Self-lock mechanism detail

6. Operasyon Enstriksyon

Your VEVOR Garage Door Opener can be operated using the included remote controls or the control panel on the main unit.

6.1 Operasyon kontwòl Remote

The two wireless remote controls allow you to open, close, or stop the garage door from a distance of more than 25 m / 82 ft.

Remote control and car opening garage door

Figure 6: Remote control in use

  • Press the designated button on the remote control once to open or close the garage door.
  • Press the button again during operation to stop the door.
  • The remote controls use a rolling code for enhanced security.

6.2 Operasyon Panel Kontwòl

The main unit features a control panel for direct operation and settings adjustment.

Control panel detail with adjusting, set, pause buttons, and display

Figure 7: Control panel on the main unit

  • Adjusting Button: Used for fine-tuning settings.
  • Ekspozisyon ekran: Shows current status and programming information.
  • Mete bouton: Used to confirm selections during programming.
  • bouton poz: Stops the door during operation.
  • Bouton '+' ak '-' yo: Used to navigate menus or adjust values.
  • Bouton 'P': Likely for programming or mode selection.

6.3 Automatic Closing and Obstacle Detection

The opener is equipped with an intelligent system that can auto-read the running power. If an obstacle is detected during the rising or falling process, the door will automatically stop to prevent damage or injury.

7. Antretyen

Regular maintenance ensures the longevity and safe operation of your garage door opener. Always disconnect power before performing any maintenance.

  • Chak mwa: Inspect the garage door and opener for any signs of wear, loose hardware, or damage. Check the chain tension and lubricate if necessary.
  • Chak trimès: Test the safety reversal system by placing an object (e.g., a 2x4 piece of wood) in the path of the closing door. The door should reverse upon contact. If it does not, contact a professional for service.
  • Chak ane: Have a qualified technician perform a comprehensive inspection and tune-up of your garage door system.

NAN. Depanaj

This section provides solutions to common issues. For problems not listed here or if solutions do not work, please contact customer support.

PwoblèmKòz posibSolisyon
Opener does not respond to remote or control panelNo power; remote battery dead; remote out of range; safety sensors obstructed.Check power supply; replace remote battery; ensure clear line of sight for remote; clear safety sensor path.
Door reverses unexpectedly or does not close fullySafety sensors misaligned or obstructed; force settings too low; door balance issues.Align or clear safety sensors; adjust force settings (refer to full manual); check door springs and tracks.
Twòp bri pandan operasyon anLack of lubrication; loose hardware; worn rollers or hinges.Lubricate moving parts; tighten hardware; inspect and replace worn components.

9. Konsèy itilizatè yo

  • Range kontwòl remote: For optimal performance, ensure a clear line of sight between the remote and the opener. Obstacles like vehicles or walls can reduce the effective range.
  • Pouvwa OutagPreparasyon: Familiarize yourself with the manual release mechanism. This will allow you to open and close your garage door manually during a power outage.
  • Netwayaj regilye: Keep the safety sensors clean and free from dust, cobwebs, or debris to ensure reliable obstacle detection.

10. Garanti ak sipò

VEVOR provides a one-year warranty for this product, covering manufacturing defects and malfunctions under normal use. For warranty claims, technical support, or any after-sales problems, please contact VEVOR customer service through their official websit la oswa enfòmasyon kontak yo bay ak dokiman acha ou a.

Dokiman ki gen rapò - ZTGD1000 Series

Preview Ouvrè pòtay baskil VEVOR MK1102M/MK1302M: Manyèl Itilizatè ak Gid Enstalasyon
Gid konplè pou ouvè pòtay baskil VEVOR MK1102M ak MK1302M. Gen ladan enstalasyon, sekirite, karakteristik ak depanaj pou sistèm pòtay otomatik yo.
Preview Manyèl Enstalasyon ak Operasyon Ouvrè Baryè Balans VEVOR MK1102M/MK1302M
Gid konplè soti nan VEVOR ki detaye enstalasyon, operasyon, ak antretyen ouvè pòtay battant MK1102M ak MK1302M yo. Gen ladan l enstriksyon sekirite, lis pyès, ak konsèy pou depanaj.
Preview VEVOR Sliding Gate Operator Manual - MD750/MD550/MD370/PY600ACKMJ0000001V2 Installation and Operation Guide
This guide provides comprehensive instructions for the VEVOR Sliding Gate Operator models MD750, MD550, MD370, and PY600ACKMJ0000001V2. It covers installation, safety, technical specifications, and troubleshooting for efficient operation.
Preview VEVOR Sliding Gate Opener User Manual - Models MD280, MD400, MD550
This user manual provides detailed instructions for installing, operating, and maintaining VEVOR Sliding Gate Openers (Models MD280, MD400, MD550), including safety precautions and troubleshooting tips.
Preview Gid Enstalasyon Ouvrè Baryè VEVOR Single Swing EK280 EK365 EK700M
Manyèl enstalasyon ak itilizatè pou VEVOR Single Swing Bary Openers (Modèl EK280, EK365, EK700M). Li kouvri sekirite, espesifikasyon, pyès, ak konfigirasyon pou operasyon baryè otomatik.
Preview VEVOR Single Swing Gate Opener Installation and Operation Manual
Comprehensive guide for VEVOR Single Swing Gate Openers (Models EK280, EK365, EK700M), covering installation, safety, technical specifications, parts lists, and troubleshooting. Learn how to safely and effectively operate your VEVOR gate opener.