FMS 90mm Ducted Fan Jet EDF with 4075 KV1500 Motor Instruction Manual

1. Entwodiksyon

Thank you for choosing the FMS 90mm 12-blade metal ducted fan (EDF) with 4075 KV1500 motor. This high-performance power system is engineered for 8S RC airplane models, offering significant thrust and efficiency. This manual provides essential information for the safe and effective assembly, operation, and maintenance of your EDF unit.

2. Pwodwi Features

2.1 EDF Unit Features

• Constructed from composite materials using injection molding for light weight, ultra-high rigidity, and toughness.
• First-class mold design ensures perfect dynamic balance of blades, resulting in sound effects and efficiency comparable to all-metal ducts.
• FMS pioneering thermal design ensures normal motor operation without affecting efficiency, preventing motor heating issues.
• Reasonable structure design allows compatibility with various manufacturers' motors and easy assembly into most 90mm ducted airplanes with minimal modifications.
• Precision-built fan on stainless-steel bushings for long and reliable service life.
• Engineered using aviation-grade CAD and simulation software for peak efficiency.

2.2 Motor Features (4075 KV1500)

• 4-pole ultra-high torque motor design.
• CNC components with aircraft-grade aluminum heat sink.
• High-quality copper wiring maximizes motor efficiency and resists temperatures up to 180 degrees Celsius.
• Ceramic NMB sealed bearings provide ultimate durability and decreased power loss due to friction.
• Stator balanced to within 10mg for minimized vibrations at high RPMs.
• Imported ultra-thin steel fins for increased heat dissipation.
• Self-cooling design reduces operational heat and prevents performance degradation.

3. Espesifikasyon

3.1 Dimansyon

• Outer Diameter (top): Approximately 113.69mm
• Outer Diameter (bottom): Approximately 105.74mm
• Inner Diameter (duct): Approximately 90.60mm
• Total Height: Approximately 120.29mm
• Mounting Hole Spacing (vertical): Approximately 41.75mm
• Mounting Hole Spacing (horizontal): Approximately 33.53mm
• Mounting Tab Width: Approximately 17.52mm

4. Enstalasyon ak Enstalasyon

4.1 Debalaj ak enspeksyon

1. Ak anpil atansyon retire tout eleman nan anbalaj la.
2. Inspect the EDF unit, motor, and blades for any signs of damage during transit.
3. Asire w ke tout konpozan ki nan lis la prezan.

4.2 Motor Installation (if purchased separately)

If you have purchased the EDF unit and motor separately, or need to re-install the motor:

1. Align the motor with the EDF housing. Ensure the motor shaft passes through the center of the fan.
2. Secure the motor to the EDF housing using appropriate screws. Do not overtighten.
3. Verify that the fan blades rotate freely without any obstruction or rubbing against the duct walls.

4.3 Koneksyon elektrik

1. Connect the three motor wires to your 120A brushless ESC (Electronic Speed Controller). The motor uses 4mm banana plugs.
2. Ensure proper polarity and secure connections. Incorrect wiring can damage the motor or ESC.
3. Connect the ESC to your 8S 29.6V 5500mAh 45C LiPo battery.
4. Connect the ESC's signal wire to the throttle channel of your RC receiver.

4.4 Mounting in Aircraft

The FMS 90mm EDF unit is designed to fit most 90mm airframes. Use the provided mounting tabs and screws to securely fasten the EDF unit within your aircraft's fuselage. Refer to the dimensional diagram in Section 3.1 for precise mounting hole spacing.

5. Operasyon Enstriksyon

5.1 Verifikasyon Pre-Vol

1. Ensure all connections (motor to ESC, ESC to battery, ESC to receiver) are secure.
2. Check that the EDF unit is firmly mounted in the aircraft.
3. Verify that the fan blades are free from debris and rotate smoothly.
4. Perform a radio range check and ensure all control surfaces are functioning correctly.
5. Confirm battery is fully charged and in good condition.

5.2 Initial Power-Up and Throttle Calibration

1. With the propeller removed (if applicable) or ensuring no obstructions near the EDF intake/exhaust, connect the battery.
2. Follow your ESC's instructions for throttle range calibration. This typically involves powering on the transmitter with full throttle, then connecting the battery, waiting for beeps, moving throttle to zero, and waiting for confirmation beeps.
3. Slowly advance the throttle to ensure the motor spins up smoothly and in the correct direction for thrust. If the direction is incorrect, swap any two of the three motor-to-ESC wires.

5.3 Operasyon an sekirite

• Always operate the EDF unit in a well-ventilated area.
• Keep fingers, loose clothing, and foreign objects away from the intake and exhaust of the EDF unit at all times. The fan blades spin at extremely high RPMs and can cause severe injury.
• Monitor motor and ESC temperatures during operation. Excessive heat can indicate an issue.
• Do not exceed the recommended 8S battery voltage.

6. Antretyen

6.1 Enspeksyon Jeneral

• After each flight, inspect the EDF unit for any signs of damage, especially to the fan blades and housing.
• Check all mounting screws for tightness.
• Ensure all electrical connections remain secure.

6.2 Netwayaj

• Keep the EDF intake and exhaust clear of dirt, dust, and debris.
• Use a soft brush or compressed air to gently clean the fan blades and inside the duct. Avoid using liquids directly on the motor or electronics.

6.3 Bearing Care

• The motor features ceramic NMB sealed bearings, which are designed for durability and low maintenance.
• If you notice any unusual noise or increased friction from the motor, the bearings may need inspection or replacement. Consult a qualified technician for bearing service.

NAN. Depanaj

8. Konsèy itilizatè yo

• Seleksyon batri: Always use high-quality 8S LiPo batteries with a C-rating of 45C or higher to ensure the EDF unit receives sufficient current for optimal performance and to prevent battery sag.
• ESC Pairing: A 120A brushless ESC is recommended. Ensure your ESC has good cooling and is rated for 8S operation. Proper ESC programming (timing, braking) can also enhance performance and efficiency.
• Airframe Integration: When installing the EDF, ensure the intake and exhaust ducts in your airframe are as smooth and unobstructed as possible. Any turbulence or restriction will reduce thrust and efficiency.
• Balans dinamik: While the blades are factory balanced, minor impacts can affect this. If you experience unusual vibrations, carefully inspect the blades for damage or consider re-balancing if you have the necessary tools and expertise.
• Jesyon tèmik: Even with the motor's self-cooling design, ensure your aircraft provides adequate airflow around the motor and ESC, especially during prolonged high-power operation.

9. Garanti ak sipò

FMS products are manufactured to high standards. For any issues or support inquiries, please contact your retailer or the official FMS support channels. Keep your proof of purchase for warranty claims. This product is intended for users aged 14 and above.