1. Entwodiksyon
The EPOMAKER G84 is an 80% layout mechanical keyboard designed for a premium typing and gaming experience. It features tri-mode connectivity (wired, 2.4GHz wireless, and Bluetooth 5.0), hot-swappable switches, gasket-mounted design with 5-layer sound dampening, and customizable RGB backlighting. This manual provides essential information for setting up, operating, and maintaining your G84 keyboard.
2. Pake kontni
Upon unboxing your EPOMAKER G84 keyboard, please ensure all the following items are present:
- EPOMAKER G84 Keyboard
- Kab USB (pou koneksyon filaire ak chaje)
- Manyèl itilizatè
- Keycap Puller
- 2.4Ghz Wireless Receiver
3. Enstalasyon ak Koneksyon
3.1 Inisyal Enstalasyon
- Unpack the keyboard and all accessories.
- Adjust the keyboard's typing angle using the two-stage adjustable feet on the underside.
3.2 Koneksyon Tri-Mòd
The G84 supports three connection modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth 5.0. A mode switch is located on the keyboard to select your preferred connection type.
3.2.1 Mòd Filaire
Connect the keyboard to your device using the provided USB-C cable. The keyboard will automatically switch to wired mode and begin charging.
3.2.2 Mòd san fil 2.4GHz
- Locate the 2.4GHz wireless receiver (often stored under a kickstand on the keyboard's underside).
- Ploge reseptè a nan yon pò USB ki disponib sou aparèy ou an.
- Switch the keyboard to 2.4GHz mode using the mode switch. The keyboard should connect automatically.
3.2.3 Mòd Bluetooth 5.0
- Chanje klavye a nan mòd Bluetooth avèk switch mòd la.
- On your device, search for Bluetooth devices and select 'EPOMAKER G84' to pair.
4. Operasyon Enstriksyon
4.1 Fonksyon debaz klavye a
The G84 features an 80% QWERTY ANSI US Layout with 84 keys. All standard keyboard functions operate as expected. The keyboard supports N-Key Rollover (NKRO) and anti-ghosting for accurate and reliable input during fast typing or gaming.
4.2 Kontwòl ekleraj RGB
The G84 features per-key RGB backlighting with shine-through PBT keycaps. You can customize the lighting effects using keyboard shortcuts or the VIA software.
Common RGB shortcuts include:
- FN + \: Toggle Color
- FN + FEN: Adjust LOGO Light
- FN + PGUP/PGDN: Adjust Saturation
- FN + Backspace: Toggle Light Effect
4.3 Pwogramasyon VIA
The EPOMAKER G84 is VIA programmable, allowing for advanced customization of key assignments, macros, and lighting effects. To use VIA, you will need to download the VIA software and the specific JSON file for the G84 model from the EPOMAKER websit.
5. Antretyen
5.1 Netwaye klavye a
Pou kenbe aparans ak fonksyonalite klavye ou a an bon eta:
- Sèvi ak yon twal mou ki pa gen pousyè pou siye kouvèti kle yo ak kouvèti a.
- For deeper cleaning, you can remove keycaps using the provided keycap puller and clean underneath with compressed air or a small brush.
- Evite itilize pwodwi chimik piman bouk oswa materyèl abrazif.
5.2 Switch ki ka ranplase a cho
The G84 features hot-swappable sockets, allowing you to change switches without soldering. This supports both 3-pin and 5-pin mechanical switches.
Pou ranplase yon switch:
- Gently remove the keycap using the keycap puller.
- Sèvi ak yon zouti pou rale switch (li pa toujou enkli, men li rekòmande) pou retire switch la ak anpil atansyon nan priz li.
- Aliyen broch nouvo switch la ak twou ki nan PCB a epi peze byen fèm jiskaske li klike an plas. Asire w broch yo pa pliye.
- Ranplase kouvèti kle a.
NAN. Depanaj
6.1 Pwoblèm koneksyon
- Wired Connection Not Working: Asire w kab USB-C a byen konekte ak klavye a ak aparèy ou an. Eseye yon lòt pò USB oswa kab.
- 2.4GHz Wireless Not Connecting: Make sure the 2.4GHz receiver is properly plugged in and the keyboard is switched to 2.4GHz mode. Try re-pairing by unplugging and re-plugging the receiver.
- Bluetooth Not Pairing/Connecting: Ensure the keyboard is in Bluetooth mode and discoverable. Remove any previous G84 pairings from your device's Bluetooth settings and try pairing again. Ensure your device's Bluetooth is enabled.
6.2 RGB Backlight Problems
- Limyè pa limen: Check if the keyboard is powered on and charged. Use the RGB shortcuts (e.g., FN + \) to cycle through modes or turn the backlight on/off.
- Koulè/Efè ki pa kòrèk: Use the VIA software to reset or reconfigure your RGB settings.
6.3 Kle yo pa reponn
- Kle Espesifik: If only a few keys are not responding, the switches might be faulty or improperly seated. Try hot-swapping the affected switches with known working ones.
- Multiple Keys/Anti-Ghosting: The G84 supports NKRO. If you experience ghosting or missed inputs, ensure your operating system drivers are up to date.
6.4 Lavi batri
The G84 has a 4000mAh battery. Battery life is approximately 15 hours with RGB backlight on and up to 400 hours with RGB backlight off.
If battery life is significantly shorter than expected, ensure the keyboard is fully charged. Excessive use of high brightness RGB or continuous wireless usage can reduce battery life.
7. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Mak | EPOMAKER |
| Modèl | G84 |
| Layout | 80% QWERTY ANSI US Layout |
| Kantite kle | 84 kle |
| Batri | 4000mAh |
| Lavi batri | 15 hours (backlight on), 400 hours (backlight off) |
| Koneksyon | Cable Wired (USB-C), 2.4GHz Wireless, Bluetooth 5.0 |
| Konpatibilite | Mac/WIN/Android/PS4/5/Xbox |
| Dimansyon klavye | 34.4cm (Longè) x 14.6cm (Lajè) |
| Keyboard Height (Spacebar side) | 1.9cm |
| Keyboard Height (F1-F12 side) | 3.3cm (No Kick-Stand), 4cm (Low Kick-Stand), 4.6cm (High Kick-Stand) |
| Ka Materyèl | Plastik |
| Materyèl Plak | Plak PC |
| Koupe fleksib | Yes (both plate and PCB) |
| Estabilizatè | Plate-Mount Stabilizer |
| Estrikti aliye | Gasket-Mount |
| Son Dampening | Poron Sandwich Foam, IXPE Switch Pad, Sound Enhancement Pad, Poron Switch Socket Pad, Bottom Silicone |
| Keycaps Profile | Cherry Profile |
| Materyèl Keycaps | PBT Keycaps |
| Keycaps Manufacturing Technique | Double-Shot |
| Cho Swappable | Yes, with 3/5-pin Mechanical Switches |
| RGB | South-facing, Per-Key RGB |
| Ekleraj | Yes, with shine-through keycaps |
| Pousantaj biwo vòt | 1000Hz (USB, 2.4Ghz), 125Hz (Bluetooth 5.0) |
| Latansi | 2ms (USB), 2ms (2.4Ghz wireless), 15ms (Bluetooth 5.0) |
| Anti-Ghosting | N-Kle Rollover |
| Pwa | 0.9kg |
7.1 Spesifikasyon Chanjman
| Karakteristik | EPOMAKER Transparent Switch | EPOMAKER Creamy Jade Switch |
|---|---|---|
| Chanje Kalite | 5-pin Mechanical, Linear, Pre-Lubed | 5-pin Mechanical, Linear, Pre-Lubed |
| Fòs deklanche | 32±5gf | 45±5gf |
| Fòs anba-deyò | Not specified in provided data | 50±5gf |
| Pre-Vwayaje | 1.9±0.4mm | 2.0±0.4mm |
| Total vwayaj | 3.7±0.3mm | 3.6±0.4mm |
| Top Case | PC | Not specified in provided data |
| Anba Ka | PC | Not specified in provided data |
| Tij | PC | Not specified in provided data |
| Limyè diffuser | No Light Diffuser | No Light Diffuser |
8. Konsèy itilizatè yo
- Pèsonalizasyon: Leverage the VIA software for advanced key remapping, macro creation, and lighting customization to personalize your typing experience.
- Jesyon batri: To maximize battery life, consider turning off the RGB backlight when not needed, especially during extended wireless use.
- Materyèl ka: The G84 keyboard features a plastic case, which contributes to its overall weight and acoustic properties.
9. Garanti ak sipò
For warranty information, technical support, or further assistance with your EPOMAKER G84 keyboard, please refer to the official EPOMAKER websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe resi acha w la kòm prèv acha.
