ATK V100 Pro Mechanical Keyboard User Manual

1. Entwodiksyon

The ATK V100 Pro is a high-performance mechanical keyboard designed for gamers and professionals seeking versatility and responsiveness. Featuring three-mode connectivity (2.4G wireless, Bluetooth 5.0, and wired USB-C), a durable CNC aluminum alloy upper cover, and hot-swappable mechanical switches, it offers a customizable and low-latency experience. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your ATK V100 Pro keyboard.

2. Gid Enstalasyon

2.1 Kontni pake a

Anvan ou kòmanse, tanpri asire w ke tout bagay yo la:

• ATK V100 Pro Mechanical Keyboard
• USB-C pou USB-A kab
• 2.4G san fil reseptè
• Keycap Puller / Switch Puller (may be combined)
• Manyèl Itilizatè (dokiman sa a)

2.2 Chaje klavye a

The ATK V100 Pro is equipped with an 8000mAh battery for extended wireless use. To charge, connect the provided USB-C cable to the keyboard's USB-C port and the other end to a powered USB port on your computer or a wall adapter. The keyboard's indicator light will show charging status.

2.3 Konekte klavye a

The ATK V100 Pro supports three connection modes:

2.3.1 Mòd Filaire

1. Connect the USB-C end of the cable to the keyboard and the USB-A end to your computer.
2. Ensure the mode switch on the keyboard is set to 'Wired' (usually indicated by a cable icon or 'USB').
3. Sistèm operasyon ou an ap rekonèt klavye a otomatikman.

2.3.2 2.4G Mòd san fil

1. Mete reseptè USB 2.4G la nan yon pò USB ki disponib sou òdinatè w la.
2. Set the mode switch on the keyboard to '2.4G' (usually indicated by a wireless icon).
3. The keyboard should connect automatically. If not, press and hold the Fn key + the 2.4G key (refer to keyboard layout for specific key) to initiate pairing.

2.3.3 Bluetooth mòd

1. Set the mode switch on the keyboard to 'Bluetooth' (usually indicated by a Bluetooth icon or 'BT').
2. Sou òdinatè w la oswa aparèy ou an, ale nan paramèt Bluetooth yo epi chèche nouvo aparèy.
3. The keyboard should appear as 'ATK V100 Pro' or similar. Select it to pair.
4. You may need to press and hold Fn + a specific Bluetooth key (e.g., Fn+1, Fn+2, Fn+3) to enter pairing mode or switch between paired Bluetooth devices.

2.4 Software Installation (ATK HUB)

For advanced customization of lighting effects, key remapping, and macros, download and install the ATK HUB software from the official ATK website (refer to the 'Warranty & Support' section for the website address). This software allows one-stop management of multiple devices.

3. Operasyon Enstriksyon

3.1 Fonksyon kle debaz yo

The ATK V100 Pro features a 101-key layout. All standard alphanumeric and function keys operate as expected. The keyboard also boasts 1ms ultra-low latency for a responsive experience, especially in gaming.

3.2 Kle Miltimedya ak Fonksyon

Use the 'Fn' key in combination with other keys (typically F1-F12 or dedicated multimedia keys) to access multimedia controls (play/pause, volume up/down, mute) and other system functions. Refer to the keycap legends for specific combinations.

3.3 Backlight Control (ARGB)

The keyboard features customizable ARGB lighting with 16 million colors and various effects. You can adjust brightness, change lighting modes, and select colors directly from the keyboard using Fn key combinations, or through the ATK HUB software for more precise control.

3.4 Switch ki ka ranplase a cho

The ATK V100 Pro supports full key hot-swapping, allowing you to change mechanical switches without soldering. This enables personalized DIY experiences and easy replacement of faulty switches.

3.5 Konsepsyon ergonomik

The keyboard is designed with two-stage foot support, allowing you to adjust the typing angle for improved comfort and reduced fatigue during long sessions.

4. Antretyen

4.1 Netwayaj

• Netwayaj jeneral: Sèvi ak yon twal mou epi sèk pou siye sifas klavye a. Pou pousyè tè ki difisil pou retire, siye yon ti kras.amp Ou ka itilize yon twal ak savon dou, pou asire pa gen likid ki antre nan klavye a.
• Netwayaj kle: Use the provided keycap puller to remove keycaps. Clean them with a mild detergent and water, then dry thoroughly before reattaching.
• Retire pousyè: Use compressed air to blow out dust and debris from between the keycaps and switches.

4.2 Ranplasman switch

Thanks to the hot-swappable design, individual switches can be replaced easily:

1. Etenn klavye a oubyen dekonekte li nan aparèy ou an.
2. Use the switch puller tool to carefully grip and pull out the desired switch.
3. Align the pins of the new switch with the holes on the PCB and gently push it in until it clicks into place. Ensure the pins are not bent.
4. Ranplase kouvèti kle a.

4.3 Swen Batri

• Evite ekspoze klavye a nan tanperati ekstrèm (cho oswa frèt).
• Do not allow the battery to fully discharge frequently, as this can reduce its lifespan.
• If storing the keyboard for an extended period, charge it to about 50-70% before storage.

NAN. Depanaj

5.1 Keyboard Not Connecting/Responding

• Branche Mode: Asire w kab USB-C a byen konekte ak klavye a ak òdinatè a. Eseye yon lòt pò USB oswa kab.
• 2.4G Wireless Mode: Ensure the 2.4G receiver is properly inserted and the keyboard is switched to 2.4G mode. Check battery level. Try re-pairing (Fn + 2.4G key).
• Mòd Bluetooth: Ensure Bluetooth is enabled on your device and the keyboard is in Bluetooth mode. Check battery level. Try re-pairing or switching to a different Bluetooth profile (Fn+1/2/3).
• Tout mòd: Ensure the keyboard is charged. Restart your computer.

5.2 Keys Not Responding or Double-Typing

• Remove the keycap and check for any debris or obstruction around the switch.
• If the issue persists, the switch might be faulty. Utilize the hot-swappable feature to replace the problematic switch.

5.3 Pwoblèm ekleraj dèyè

• Ensure the backlight is turned on and brightness is adjusted using Fn key combinations.
• Check the ATK HUB software for any conflicting settings or to reset lighting profiles.

5.4 Lag or High Latency

• In 2.4G or Bluetooth mode, ensure there are no strong interfering signals (e.g., other wireless devices, microwaves) nearby.
• For critical gaming, consider using the wired connection for the most stable and lowest latency performance.
• Ensure the keyboard's battery is sufficiently charged.

6. Espesifikasyon

6.1 Key Switch Specifications

7. Konsèy itilizatè yo

• Eksperyans ak switch: Pran avantage of the hot-swappable design to try different switch types that best suit your typing or gaming preferences.
• Customize RGB Profiles: Use the ATK HUB software to create and save multiple RGB lighting profiles pou diferan aplikasyon oswa jwèt.
• Kenbe firmwèr la ajou: Regularly check the official ATK websit pou mizajou firmwèr pou asire pèfòmans optimal ak aksè a nouvo fonksyonalite.
• Optimize pèfòmans san fil: For the best wireless experience, keep the 2.4G receiver close to the keyboard and avoid placing large metal objects between them.

8. Garanti & Sipò

For product support, technical assistance, or warranty inquiries, please contact your seller or visit the official ATK website. For services such as product driver download, please visit https://ATK.PRO.