1. Entwodiksyon
Thank you for choosing the B-M H-100 LCD E-bike Display. This high-quality display is designed to enhance your electric bicycle riding experience by providing essential real-time information. It automatically identifies and is compatible with 24V to 72V electric bicycle systems. The H-100 display offers a clear reflection of your battery charge, real-time power consumption, and riding performance data. Its individual connections are clearly arranged for straightforward and cost-effective installation.
The display features a large screen, is easy to operate, and offers versatile functionality for various riding needs, including speed, mileage, error indications, and battery charge status.
2. Enfòmasyon sou Sekirite
Please read all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Always ensure the e-bike's power is OFF before installing or disconnecting the display.
- Avoid exposing the display to extreme temperatures, direct sunlight for prolonged periods, or heavy rain.
- Do not attempt to open or modify the display unit. This will void the warranty and may cause damage.
- Asire w tout koneksyon yo byen fèm epi byen izole pou anpeche kous kout.
- If you are unsure about any installation steps, consult a qualified e-bike technician.
3. Pake kontni
Pake a gen ladan atik sa yo:
- 1 x B-M H-100 LCD E-bike Display
- 1 x 5-core SM Connector Cable (integrated with display)
- 1 x External Button Unit
- 1 x L.amp Wire (if applicable to your model)
4. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Modèl | H-100 |
| Voltage Konpatibilite | 24V - 72V (Automatic Identification) |
| Kalite Connector | 5-pin SM Connector |
| Kalite ekspozisyon | LCD |
| Koulè | Nwa |
| Materyèl | Plastik |
| Dimansyon (L x W) | 93.4 x 62.2 mm |
| Longè kab | Apeprè 1650mm (64.96 pous) |
| Metòd enstalasyon | Self-contained (handlebar mount) |
5. Enstalasyon ak Enstalasyon
The installation of the H-100 display is designed to be straightforward, requiring only a few simple steps. Ensure your e-bike is powered off before beginning installation.
5.1 Enstalasyon Ekran an
- Identify a suitable position on your e-bike's handlebars for the display. Ensure it is easily visible and accessible while riding, without obstructing your view oswa kontwòl.
- Loosen the mounting screws on the display's handlebar clamps.
- Position the display on the handlebars and tighten the screws securely. Do not overtighten.
5.2 Koneksyon elektrik
The H-100 display uses a 5-pin SM connector for main communication and power. Additionally, there are connections for external buttons and a lamp fil.
- Locate the corresponding 5-pin SM connector on your e-bike's controller or wiring harness.
- Carefully align the pins and connect the display's 5-pin SM connector to the e-bike's harness. Ensure a firm connection.
- Connect the external button unit cable to its designated port on the display's wiring.
- If your e-bike system supports it and you wish to control a light via the display, connect the lamp wire from the display to your e-bike's lighting system.
- Route all cables neatly and secure them with cable ties to prevent snagging or damage during riding.
6. Operasyon Enstriksyon
The H-100 display provides comprehensive information about your ride. The external button unit allows for easy navigation and control.
6.1 Fonksyon ekspozisyon
The LCD screen clearly shows the following information:
- Vitès: Current riding speed (km/h or mph).
- Kilométrage: Odometer (ODO), Trip distance (TRIP), Maximum speed (MAX), Average speed (AVG).
- Chaj batri: Real-time battery level indicator.
- Endikatè erè: Li montre 'ERÈ' si yo detekte yon fot sistèm.
- Nivo PAS: Pedal Assist System level (indicated by 'PAS' and a number).
- Endikatè limyè devan: Icon for headlight status.
6.2 Fonksyon bouton
The external button unit typically includes:
- Pouvwa / Mode bouton: Press and hold to power on/off the display. Short press to cycle through display modes (e.g., ODO, TRIP, MAX, AVG).
- Up Button (+): Increases PAS level, navigates menu options upwards, or increases values in settings.
- Down Button (-): Decreases PAS level, navigates menu options downwards, or decreases values in settings.
Specific button combinations for advanced settings (e.g., wheel size, speed limit) may vary by e-bike controller. Refer to your e-bike's main controller manual for detailed programming instructions.
7. Antretyen
To ensure the longevity and optimal performance of your B-M H-100 LCD E-bike Display, follow these simple maintenance guidelines:
- Netwayaj: Siye ekran an ak kò a ak yon twal mou,amp cloth. Do not use abrasive cleaners, solvents, or excessive water, as these can damage the screen or internal electronics.
- Pwoteksyon anviwònman: While the display is designed for outdoor use, avoid prolonged exposure to heavy rain or direct water jets. If riding in wet conditions, consider a protective cover.
- Tcheke Koneksyon: Tcheke tout koneksyon elektrik yo regilyèman pou asire yo byen fèm epi yo pa gen korozyon.
- Depo: Lè w pa itilize bisiklèt elektrik la pou yon bon bout tan, sere l epi mete l nan yon anviwònman sèk epi ki gen yon tanperati ki wo.
NAN. Depanaj
If you encounter issues with your H-100 display, consider the following common troubleshooting steps:
- Ekran an pa limen:
- Ensure the e-bike battery is charged and powered on.
- Check all cable connections, especially the 5-pin SM connector, for looseness or damage.
- Verify the power button on the external unit is functioning correctly.
- 'ERROR' Message on Display:
- An 'ERROR' message indicates a fault within the e-bike system. This could be related to the motor, controller, battery, or sensors.
- Consult your e-bike's main manual for specific error codes and their meanings.
- Often, turning the e-bike off and on again can reset minor errors. If the error persists, professional diagnosis may be required.
- Lekti Vitès/Kilometraj ki pa egzak:
- Check if the wheel size setting in the display's advanced menu (if accessible) matches your e-bike's wheel size.
- Ensure the speed sensor (usually on the rear wheel) is clean, properly aligned, and not damaged.
- Bouton ki pa reponn:
- Check the connection of the external button unit to the display.
- Ensure buttons are not stuck or physically damaged.
If these steps do not resolve the issue, please contact your e-bike dealer or a qualified technician for assistance.
9. Konsèy itilizatè yo
Malgre pa gen okenn konsèy espesifik pou itilizatè ki soti nan reviews or Q&A were available, here are some general recommendations for optimizing your experience with the H-100 display:
- Siveyans regilye: Pay attention to your battery charge and mileage to plan your rides effectively and avoid running out of power unexpectedly.
- Konsyantizasyon anviwònman an: Be mindful of the display's visibility in different lighting conditions. Adjust your riding posture if glare affects readability.
- Jesyon kab: Ensure all cables are securely fastened and protected from moving parts or potential abrasion points on your e-bike.
10. Garanti ak sipò
For warranty information and technical support, please refer to the terms and conditions provided by your original point of purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.
