1. Entwodiksyon
Thank you for choosing the Thermalright FW 240 ARGB All-in-one Water Cooler. This high-performance liquid cooling solution is designed to provide superior thermal management for your CPU, featuring a 240mm radiator, addressable RGB lighting, and a unique 2.4-inch magnetically rotatable LCD display for real-time system monitoring and personalization. This manual will guide you through the installation, operation, and maintenance of your new cooler.
2. Karakteristik kle
- Efficient Liquid Cooling: 240mm radiator for effective heat dissipation.
- Vibrant ARGB Lighting: Addressable RGB fans and pump head for customizable aesthetics.
- Ekran LCD IPS 2.4 pous: Magnetically rotatable screen with 320x240 resolution, 450 Nits peak brightness, and 24-bit color depth.
- Ekspozisyon personnalisable: Supports personalized JPG, PNG, and GIF images for unique visual themes.
- Siveyans an tan reyèl: Display CPU temperature, frequency, GPU temperature, and other system parameters.
- Robust Pump Design: Corev1.0 independent water pump framework with a 9-pole rotor motor and micro-dental shovel technology for enhanced heat absorption and reduced noise.
- Lajè konpatibilite: Supports a broad range of Intel and AMD sockets.
- High-Quality Thermal Paste: Includes standard TF7 heat conduction silicone grease (12.8W/mk).
3. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Nimewo Modèl | FW 240 |
| Kalite | CPU All In One Liquid Cooler |
| Radiator Type | 240 MM |
| Radyatè dimansyon | 277mm x 120mm x 27mm |
| Cold Head Dimensions | 69.2mm x 69.2mm x 60mm |
| Water Guide Length | 450mm |
| Materyèl radyatè | Copper & Aluminum |
| Sokèt CPU ki sipòte | Intel: LGA 2066, LGA 1150, LGA 1155, LGA 1151, LGA1200, LGA 1156, LGA 1700, LGA 2011 AMD: AM4, Socket AM5 |
| Sipò RGB | A-RVB |
| Entèfas fanatik | 4PIN PWM |
| Entèfas ponp | 4PIN PWM |
| With Liquid | Wi |
| Paste tèmik | TF7 (Thermal conductivity 12.8W/mk) |
Paramèt ponp
| Paramèt | Valè |
|---|---|
| Vitès | 3000RPM + 10% |
| Voltage | DC 12V |
| Kouran | 0.28A + 10% |
| Bri | ≤23dB (A) |
| Pouvwa | ≤3.4W |
| ARGB Interface | +5V/3PIN ARGB |
Fan Parameters (TL-P12W-S)
| Paramèt | Valè |
|---|---|
| Gwosè | 120 x 120 x 25mm |
| Vitès | 2000RPM + 10% (MAX) |
| Voltage | DC 12V |
| Kouran | 0.17A |
| Presyon van | 2.63MM H₂O (MAX) |
| Volim Air | 70.84 CFM (MAX) |
| Bri | ≤22.1dB (A) |
| ARGB Interface | +5V/3PIN ARGB |
| Portant | Kote yo pote S-FDB |
LCD Display Specifications
| Paramèt | Valè |
|---|---|
| Gwosè ekran | 2.4 pous |
| Rezolisyon | 320 x 240 |
| Kalite Panel | IPS LCD |
| Klète | 450 Nits (peak) |
| Koulè Pwofondè | 24-bit |
| Sipò pou Fòma Imaj | JPG, PNG, GIF |
4. Pake kontni
Please check the package contents to ensure all components are present:
- Thermalright FW 240 ARGB All-in-one Water Cooler (Radiator with pre-installed fans, Pump/Cold Plate with LCD display)
- Mounting Brackets for Intel Sockets (LGA1700, LGA115X, LGA1200, LGA2011, LGA2066)
- Mounting Brackets for AMD Sockets (AM5, AM4)
- Backplates (where applicable)
- Vis ak Distansè pou Monte
- Thermalright TF7 Thermal Grease
- Water Pipe Buckles
- Manyèl itilizatè
5. Gid Enstalasyon
Before starting, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket details.
5.1 Prepare CPU a ak kat manman an
- Clean the CPU surface thoroughly with isopropyl alcohol to remove any old thermal paste.
- Apply a small amount of the included TF7 thermal grease to the center of the CPU's integrated heat spreader (IHS).
5.2 Install Radiator and Fans
- Mount the radiator to an available fan mount in your PC case (e.g., top, front, or rear). Ensure proper airflow direction. The fans are pre-installed.
- Secure the radiator using the appropriate screws.
5.3 Install Pump/Cold Plate
The FW 240 uses the SS2 buckle system for secure mounting.
- For Intel Sockets (LGA1700, LGA115X, LGA1200, LGA2011, LGA2066):
a. Attach the correct Intel backplate (if required for your socket) to the rear of the motherboard.
b. Install the appropriate Intel mounting standoffs onto the motherboard.
c. Place the pump/cold plate onto the CPU, aligning the mounting holes.
d. Secure the pump/cold plate with the Intel mounting screws. - Pou Sokèt AMD (AM5, AM4):
a. Ensure the original AMD backplate is in place on the motherboard.
b. Install the appropriate AMD mounting standoffs onto the motherboard.
c. Place the pump/cold plate onto the CPU, aligning the mounting holes.
d. Secure the pump/cold plate with the AMD mounting screws. - The pump head is magnetically rotatable. Adjust its orientation after installation to ensure the LCD display is upright and readable.
5.4 Konekte Cables
- Connect the 4-pin PWM fan cables from the radiator fans to your motherboard's CPU_FAN or SYS_FAN headers.
- Connect the 4-pin PWM pump cable to your motherboard's AIO_PUMP or CPU_OPT header.
- Connect the 3-pin ARGB cable from the fans and pump to your motherboard's +5V ARGB header.
- Connect the USB cable from the pump head to an available internal USB 2.0 header on your motherboard. This powers the LCD screen and enables software control.
6. Operasyon
6.1 Premye pouvwa sou
After installation, power on your PC. The fans and pump should start, and the ARGB lighting will illuminate. The LCD display on the pump head will power on and show default system information.
6.2 Software Control (TRCC)
To fully utilize the customization features of your FW 240, download and install the Thermalright TRCC water-cooled LCD screen control software from the official Thermalright websit. Lojisyèl sa a pèmèt ou:
- Monitor various system parameters (CPU temperature, frequency, GPU temperature, etc.).
- Customize the display content and layout on the 2.4-inch LCD screen.
- Upload personalized JPG, PNG, or GIF images as backgrounds or animations.
- Adjust ARGB lighting effects and colors for the fans and pump.
- Save and switch between different display themes (M1-M6 corresponding to system states).
Demonstration of the Thermalright FW 240 ARGB cooler's dynamic RGB lighting effects and the magnetically rotatable LCD display.
7. Antretyen
Antretyen regilye ede asire pèfòmans optimal ak lonjevite glasyè likid ou a.
- Netwayaj pousyè: Periodically clean the radiator fins and fan blades with compressed air to remove dust buildup. Ensure fans are not spinning during cleaning.
- Jesyon kab: Use the provided water pipe buckles to keep tubing and cables tidy, preventing interference with other components or airflow.
- Liquid Check: While AIO coolers are sealed, occasionally inspect the tubing and connections for any signs of leaks or damage.
- Pat tèmik: If you ever remove the cold plate from the CPU, clean off the old thermal paste and apply a fresh layer before reinstallation.
NAN. Depanaj
- No Power to Fans/Pump/RGB:
- Check all 4-pin PWM and 3-pin ARGB cable connections to the motherboard.
- Ensure the motherboard headers are correctly configured in BIOS/UEFI. - Ekran LCD a pa fonksyone:
- Verify the internal USB 2.0 cable from the pump head is securely connected to the motherboard.
- Ensure the TRCC software is installed and running correctly.
- Check if the USB header is enabled in BIOS/UEFI. - Tanperati CPU ki wo:
- Confirm the cold plate is making proper contact with the CPU. Re-seat if necessary, ensuring even pressure.
- Check if thermal paste was applied correctly.
- Ensure fans are spinning and radiator fins are clear of dust.
- Verify pump is running (listen for a faint hum or check software monitoring). - Pwoblèm ekleraj RGB:
- Ensure the 3-pin ARGB cable is connected to a +5V ARGB header, not a +12V RGB header (which can damage the LEDs).
- Use the TRCC software or your motherboard's RGB software to control the lighting.
9. Konsèy itilizatè yo
- LCD Power: The LCD screen is powered via the internal USB 2.0 header connection to your motherboard. Ensure this connection is secure for the display to function.
- Pèsonalizasyon lojisyèl: Pran avantage of the TRCC software to personalize your cooler's display. You can upload custom GIFs or images to match your system's theme or display crucial system stats.
- Pump Head Orientation: The magnetically rotatable pump head allows you to adjust the LCD's orientation without removing the cooler. This is useful if your installation requires the pump to be mounted in a specific way.
10. Garanti ak sipò
Thermalright provides a 3-year warranty for this product. For technical support, warranty claims, or further assistance, please contact Thermalright customer service through their official website or your retailer. Keep your proof of purchase for warranty validation.
