Entwodiksyon
This manual provides comprehensive instructions for the safe and effective use of your FMS 2.4GHz MG44 Transmitter and R4P1 Receiver Set. This set is designed for use with 1:24 scale RC vehicles, including models like the K5 PRO, C3656, C3657, and C3658. Please read this manual thoroughly before operating the device to ensure proper setup and to prevent damage.
Enfòmasyon sou Sekirite
⚠ AVÈTISMAN: Pwodui sa a ka ekspoze w a pwodui chimik tankou ftalat (DEHP), ke Eta Kalifòni konnen ki lakòz kansè ak domaj nesans oswa lòt pwoblèm repwodiktif. Pou plis enfòmasyon ale nan www.P65Warnings.ca.gov.
Always operate your RC vehicle in a safe and responsible manner. Keep hands, face, and loose clothing away from moving parts. Do not operate near people, pets, or obstacles. Ensure batteries are correctly installed and charged. Adult supervision is recommended for users under 14 years of age.
Kontni pake
- 1 x FMS MG44 2.4GHz Transmitter
- 1 x FMS R4P1 2.4GHz Receiver
Pwodwi souview
FMS MG44 Transmitter
The FMS MG44 Transmitter features a pistol-grip design for comfortable handling, a steering wheel for directional control, and multiple buttons/switches for auxiliary functions. It operates on the 2.4GHz frequency band.
FMS R4P1 Receiver
The FMS R4P1 Receiver is a compact unit designed to receive signals from the MG44 Transmitter. It operates on the 2.4GHz frequency and is compatible with 3.5-8.4V DC power sources.
FMS MG44 Transmitter and R4P1 Receiver Set
The complete FMS 2.4GHz MG44 Transmitter and R4P1 Receiver Set, ready for installation and use with compatible RC vehicles.
Enstriksyon Enstalasyon
- Enstale pil yo nan transmetè a: Open the battery compartment on the MG44 Transmitter and insert the required batteries (not included), ensuring correct polarity. Close the compartment securely.
- Connect Receiver to Vehicle: Mount the R4P1 Receiver securely in your RC vehicle. Connect the receiver to the Electronic Speed Controller (ESC) and steering servo according to your vehicle's specific wiring diagram. Ensure the receiver is powered by the vehicle's battery or BEC (Battery Eliminator Circuit).
- Pwosedi obligatwa:
- Limen transmetè a.
- Power on the RC vehicle (which powers the receiver).
- Locate the bind button/port on the R4P1 Receiver. Press and hold the bind button (or insert a bind plug into the bind port).
- The receiver's LED indicator should flash, indicating it's in binding mode.
- Release the bind button/remove the bind plug. The LED should become solid, indicating a successful bind.
- If binding fails, repeat the steps.
- Kontwòl tès yo: After successful binding, test the steering and throttle controls to ensure they respond correctly and in the right direction. Adjust servo reverse settings on the transmitter if necessary.
Enstriksyon Operasyon
- Pouvwa sou: Always turn on the transmitter first, then power on your RC vehicle.
- Kontwòl volan: Use the steering wheel on the left side of the transmitter to control the vehicle's direction (left/right).
- Kontwòl gaz: Use the trigger on the transmitter for throttle control. Pull the trigger back to accelerate forward, push it forward to brake or reverse.
- Fonksyon oksilyè: Utilize the various buttons and switches on the transmitter for any auxiliary functions your RC vehicle may have (e.g., lights, gear shifting, differential lock), if supported.
- Pouvwa Off: Always power off your RC vehicle first, then turn off the transmitter. This prevents accidental runaway.
Antretyen
- Netwayaj: Wipe the transmitter and receiver with a soft, dry cloth. Avoid using harsh chemicals or solvents.
- Depo: Store the set in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if storing for extended periods.
- Swen batri: Ensure batteries are charged according to their manufacturer's instructions. Do not overcharge or deep discharge.
- Enspeksyon: Periodically check all wires and connections for signs of wear or damage.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen repons nan men machin nan |
|
|
| Erratic control/Loss of signal |
|
|
| Steering/Throttle reversed |
|
|
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | FMS |
| Modèl | MG44 Transmitter, R4P1 Receiver Set |
| Frekans | 2.4GHz |
| Reseptè Voltage Range | 3.5-8.4V DC |
| Materyèl | Plastik |
| Laj Rekòmande | 14+ ane |
| Aplikasyon | Vehicles & Remote Control Toys (Cars) |
| Batri enkli | Non |
| Orijin | Lachin tè pwensipal |
Konsèy itilizatè
- Always ensure a clear line of sight between the transmitter and your RC vehicle for optimal signal strength.
- Avoid operating your RC vehicle in wet conditions or extreme temperatures to protect the electronics.
- Familiarize yourself with the layout of the transmitter's controls before operating your vehicle at speed.
- Consider using rechargeable batteries for your transmitter for environmental benefits and cost savings.
Garanti ak sipò
FMS products are manufactured to high-quality standards. For any issues or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.
