YABER 2000A Peak Current Car Jump Starter

Entwodiksyon

This manual provides essential information for the safe and effective use of your YABER 2000A Peak Current Car Jump Starter. Please read all instructions carefully before operating the device and retain this manual for future reference.

The YABER 2000A Jump Starter is a versatile device designed to jump-start 12V vehicles with up to 7.0L gas or 5.5L diesel engines. It also functions as a portable power bank and features a multi-mode LED emergency light.

Image: YABER Jump Starter highlighting its key features: 2000A peak current, 13800mAh power bank, 3-mode LED light, and 10 super safety protections.

Ki sa ki nan bwat la

Verifye ke tout atik yo prezan nan pakè ou a:

• Sou entènèt jwèt Portable Jump Starter
• Safety Jumper Cables (Smart Clip)
• USB-C Chaje Kab
• Sak Depo pòtab
• Manyèl Itilizatè (dokiman sa a)

Image: Visual representation of the package contents, including the jump starter, jumper cables, USB-C cable, storage bag, and user manual.

Espesifikasyon

Image: Diagram illustrating the powerful start performance, showing compatibility with engine sizes from 1.5L to 7.0L.

Enfòmasyon sou Sekirite

Toujou obsève prekosyon sekirite sa yo pou evite blesi oswa domaj nan aparèy la ak machin nan:

• Li epi konprann tout enstriksyon yo anvan ou itilize.
• Ensure the jump starter is fully charged before attempting to jump-start a vehicle.
• Pa konekte wouj ak nwa cl aamps together, as this may cause sparks or damage.
• Avoid reverse polarity connections. Always connect the red clamp nan tèminal pozitif (+) la ak nwa clamp nan tèminal negatif (-).
• Do not expose the device to rain, water, or extreme temperatures.
• Kenbe aparèy la pa rive nan men timoun yo.
• If the jump starter becomes excessively hot during use, discontinue operation immediately.
• The device features 10 smart protections to ensure safe operation, including protection against over-current, short-circuit, over-charge, and reverse polarity.

Imaj: Gwo plan view of the red and black jumper clamps, emphasizing the 10 safety protections integrated into the device.

Enstalasyon

Chaje Starter la Ale

Before first use, fully charge the YABER Jump Starter. It is recommended to recharge the device after each use or every 3-6 months if not used, to maintain optimal battery health.

1. Connect the provided USB-C charging cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB-C cable to a suitable USB power adapter (not included) or a powered USB port.
3. The LED indicators on the jump starter will illuminate to show the charging progress. All indicators will be solid when fully charged.

Image: The YABER Jump Starter functioning as a portable power bank, charging a smartphone and a laptop via its USB ports.

Enstriksyon Operasyon

Ale kòmanse yon machin

Follow these steps to safely jump-start your 12V vehicle:

1. Insert the Smart Clip: Plug the blue end of the smart clip cable firmly into the jump starter's jump-start port. Ensure a secure connection.
2. Konekte ak batri machin nan: Tache wouj (+) clamp nan tèminal pozitif batri machin ou an ak cl nwa a (-)amp to the negative terminal. Ensure the clamps make good contact with the battery terminals.
3. Kòmanse motè ou a: Yon fwa clamps are correctly connected, start your vehicle's engine. If the engine does not start immediately, wait a few seconds and try again. For very low voltage batteries, the 'Force Start Function' can be activated (refer to device specific instructions for activation, typically a button press).
4. Retire Clamps: Apre motè a fin kòmanse, retire klowòks la imedyatman.ampsoti nan batri machin nan, premye pwen nwa a (-)amp, apre sa wouj la (+) clamp. Disconnect the smart clip from the jump starter.

Image: Four-step visual guide on how to jump-start a car engine: 1. Insert smart clip, 2. Connect to car battery, 3. Start engine, 4. Remove clamps.

Sèvi ak kòm yon bank pouvwa pòtab

The YABER Jump Starter can charge various electronic devices:

• USB-A Sòti: Connect your device's USB charging cable to the USB-A output port (5V 2.1A) on the jump starter.
• USB-C Antre: The USB-C port (5V 1.5A) is primarily for charging the jump starter itself.

Image: The YABER Jump Starter acting as a portable power bank, showing USB-A output and USB-C input ports for charging other devices and the unit itself.

Sèvi ak limyè ijans ki ap dirije

The built-in LED light offers three modes for various situations:

• Flach: Bay yon ekleraj fiks.
• Mòd SOS: Emits an SOS signal in Morse code for emergencies.
• Strobe mòd: Flashes rapidly for signaling or warning.

To operate the LED light, press the power button briefly to cycle through the modes (Flashlight > SOS > Strobe > Off).

Image: A person using the YABER Jump Starter's LED light to illuminate an engine bay, demonstrating its utility as an emergency light source.

Image: Graphic illustrating the three modes of the LED light: Flashlight, SOS, and Strobe.

Antretyen

• Rechaje: For optimal battery life, recharge the jump starter every 3-6 months, even if it has not been used.
• Depo: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided portable storage bag for protection.
• Netwayaj: Clean the exterior of the jump starter with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Swen kab: Enspekte kab jumper yo ak klou a.amps regularly for any signs of damage or wear. Replace if necessary.

Depanaj

• Vehicle Does Not Start:
  • Asire demaraj so a konplètman chaje.
  • Check that the smart clip is securely plugged into the jump starter.
  • Verify that the red and black clamps are correctly and firmly attached to the car battery terminals (red to positive, black to negative).
  • If the car battery is extremely low, you may need to use the 'Force Start Function' (consult specific device instructions for activation).
• Jump Starter Does Not Charge:
  • Ensure the USB-C charging cable is properly connected to both the jump starter and the power source.
  • Eseye yon diferan USB-C kab oswa adaptè pouvwa.
  • Verifye ke sous kouran an fonksyone.
• Limyè ki ap dirije pa travay:
  • Asire w ke demarè a gen ase chaj.
  • Peze bouton pouvwa a pou fè sik atravè mòd limyè yo.

Konsèy itilizatè

• Always keep your jump starter charged, especially before long trips or during cold weather, as battery performance can be affected by temperature.
• Familiarize yourself with your vehicle's battery location and terminals before an emergency arises.
• Consider practicing the connection steps once in a non-emergency situation to build confidence.
• The compact size of this jump starter makes it easy to store in your glove compartment or trunk, ensuring it's always available when needed.

Image: A hand holding the YABER Jump Starter, illustrating its compact and lightweight design, which is stated to be 30% smaller than other similar devices.

Garanti ak sipò

For warranty information or technical support, please refer to the contact details provided by your retailer or visit the official YABER websit la. Kenbe resi acha ou kòm prèv acha pou nenpòt reklamasyon garanti.